Gutter Pro 5K Foam Wedge Installation guide

Installation Instructions:

1. Set up ladder. Ladder feet should be placed on firm ground. Do NOT set

ladder on any slippery surfaces.

2. Tie ladder to building. Wrap a bungee cord or rope around a rung of the

ladder and hook onto the gutter. Insure ladder is secured before

proceeding to next step.

3. Clean out debris from gutter and downspout.

4. Run water through gutter and downspout.

5. Install Gutter Pro Foam Inserts placing them into the gutter as shown in

diagram.

6. Gutter Pro Foam Inserts should be placed under the gutter straps.

7. Miter corners with scissors or knife when gutters make a change in

direction.

5” K Style Gutter