Configuring IP
Home > Settings > System information
Network
Exit
NOTE:
To set or change the IPv4 settings
1. Select IP version
Home > Settings > Administrator settings > IP settings
IPv4IP version
2. Select automatic or manual IP assignment
Configure > IP assignmentDHCPIP
assignment
Static
DHCP
StaticConfigure
IP AddressSubnet MaskGatewayDNSServer
3. Save settings
SaveCancel
OK
4. Return to the main menu
Home
To set or change the IPv6 settings
1. Select IP version
Home > Settings > Administrator settings > IP settings
IPv6IP version
2. Select automatic or manual IP assignment
Configure > IP assignmentAutoconfIP
assignment
Static
AutoconfConfigureDHCP
OptionsOnOff
StaticConfigure
IP AddressDHCPOptionsOn
Off
3. Save settings
SaveCancel
OK
4. Set DNS and NTP server addresses
Advanced configuration
Network 1 > DNS > Server 1
save
Network services > NTP
save
ModeAuto
5. Return to the main menu
Home
Always save the new value when you change a setting
•
OK
•
Ok/SaveCancel
OK
Back to task overview