Baxtran M80 User manual

Brand: Baxtran

Model: M80

Type: User manual

This manual is also suitable for

ENENUSER'S MANUAL T-TOUCH SERIES

V.5_25/11/2019

COMMERCIAL SCALES

TOUCH SERIES

USER MANUAL

marca propiedad de | est une marque de | trade mark property of:

Pol. Empordà Internacional Calle F. Parcela 15-16

17469 VILAMALLA - (Girona) SPAIN

T. (34) 972 527 212 - F. (34) 972 527 211

El fabricante se reserva el derecho de modificar sin previo aviso las características de sus productos para introducir mejoras técnicas o cumplir con nuevas regulaciones oficiales./Le

constructeur se réserve le droit de modifier les caractéristiques de ses produits en vue d’y apporter des améliorations techniques ou de respecter de nouvelles réglamentations./The

manufacturer reserves the right to modify the specifications of its products in order to make technical improvements or comply with new regulations.

ENENUSER'S MANUAL T-TOUCH SERIES

1. QUICK GUIDE 6

1.1 REQUIREMENTS 6

1.2 INTERFACES 6

1.3 TYPE OF POWER SOURCE 7

1.4 PAPER ROLL CHANGE - S70 / M80 8

1.5 SWITCHING ON AND OFF 9

2. GENERAL INFORMATION 10

2.1 SALES SCREEN 10

2.2 REAR SCREEN 12

2.3 ON-SCREEN KEYBOARD 13

3. OPERATION 14

3.1 FUNCTIONS 14

3.2 SALES OPERATION MODE 15

3.3 MANUAL ENTRY PRICE / QUANTITY 16

3.4 AUTO-ACCUMULATION MODE 17

3.5 REMOVE ACCUMULATED PRODUCTS 18

3.6 COLLECTION OPERATION 20

3.7 SALES RETURN 22

3.8 EDIT PLU 22

4. MAIN MENU SETTINGS 24

4.1 LOG IN/LOG OUT 25

4.2 SALES 26

4.3 ID SETTING 26

4.4 SETTINGS 30

4.4.1 BASIC INFORMATION 31

4.4.2 SYSTEM 34

4.4.3 WEIGHT 37

4.4.4 OPERATION 37

4.4.5 CALIBRATION 41

4.4.6 COMUNICATION 41

4.4.7 PREVIOUS SCREEN 42

4.5 USER INTERFACE 49

4.6 DATA 57

4.7 REPORTS 61

4.8 PRICE TYPE 62

4.9 PRINT FORMAT 62

ENENUSER'S MANUAL T-TOUCH SERIES

WARNING!

1. Check the voltage before connecting the scale. Use only the correct voltage

assigned to avoid damage.

2. Avoid using the scale in hazardous environments.

3. Avoid suddenly or strongly impacting the scale.

4. Avoid submerging the scale in water and in highly humid environments.

5. Do not turn on the scale when it has just undergone large temperature changes

to avoid possible damage.

ENENUSER'S MANUAL T-TOUCH SERIES

INTRODUCTION

The touch screen scales S70 and M80 are specially designed for shops, supermarkets, etc. They use a Linux-based operating system with touch

screens.

Characteristics

• Resistive touch screen system.

• 8" (S70), 10'' (M80) TFT LCD screen.

• 7'' (S70), 10'' (M80) customer HD screen.

• The customer's screen is able to play images and videos.

• Selectable weighing units.

• Built-in real time clock.

• 1 GB RAM and 1 GB FLASH memory.

• Unlimited data storage capacity*.

• 99999 PLU storage capacity.

• Multiple, customizable print formats.

• Connectivity with PC keyboard, mouse, barcode scanner and cash box.

• RS232x2: The serial communication port can be connected to a PC,

mini printer, ticket printer, label printer, etc.

• Report management.

Note: * Data storage depends on the availability of free memory

ENENUSER'S MANUAL T-TOUCH SERIES

1. QUICK GUIDE

1.1 REQUIREMENTS

Check that the power supply has the correct voltage required before use. The mounting location must be a stable surface free of heat, water and

moisture.

1.2 INTERFACES

M80 Series:

RJ-11 USB2 RJ-45 RS-232: COM1 MINI USB

S70 Series:

RS-232 X 2 RJ-11 RJ-45 MINI USB

USBPort x 2

JACK ADAPTER

RS-232 COM2

ENENUSER'S MANUAL T-TOUCH SERIES

INTERFACE QUANTITY DESCRIPTION

RJ11 1 Cash draw

USB 2For mouse, keyboard, barcode scanner

RJ45 1 Ethernet

RS232 2For printers or other supported equipment

1.3 TYPE OF POWER SOURCE

M80 Series

SWITCHING ON

CONNECTOR

S70 Series

SWITCHING ON

CONNECTOR

ENENUSER'S MANUAL T-TOUCH SERIES

1.4 PAPER ROLL CHANGE - S70 / M80

Push button to open Lift to open the lid Replace the paper roll

Peel off the paper Close Pull out the paper

ENENUSER'S MANUAL T-TOUCH SERIES

1.5 SWITCHING ON AND OFF

SWITCHING ON

Press and hold down the Power key until you hear a "beep", then

the scale will start the power up process.

SWITCH

SHUTTING DOWN

Press the key on the main menu, and press "confirm" on

the pop-up screen to turn off the equipment

SWITCH OFF KEY

Note: If you press and hold the "On" switch for a long period, the scale will turn off.

1- It is necessary to enter the user name and password to access the scale’s operations.

To access the scale’s operations, select the user name on the list and enter the password.

Default user name: admin

Default password: admin

2- It is necessary to press the "access" key to display the sales screen where, by pressing the "Menu" key, we access the main menu,

from which we can move through the scale’s different sections.

ENENUSER'S MANUAL T-TOUCH SERIES

2. GENERAL INFORMATION

2.1 SALES SCREEN

DISPLAY/

INDICATOR

DESCRIPTION

1 Zero

Tare

Stable

Displays the current weighing status

2 Range Displays the weighing range

4 Operator Displays who the active operator is

5 Capacity Displays the capacity, the minimum weight, and the division.

6 Version Displays the software version

7 Power supply Displays that it is connected to the electricity

8 Date and time Displays the date and time

9Tare Displays the tare value

10 Weight Displays the weight

ENENUSER'S MANUAL T-TOUCH SERIES

11 Unit price Displays the unit price

12 Total Displays the amount

13 Product Shows the product

14 Sales list Shows sales or vendor summary according to model

15 Category Displays the categories

16 PLU Keys To select the product

17 Active vendor Displays the active vendor and the total number of sales they have made

18 Vendor To select the vendor

19 Clear key To delete the current selection or product entry, price, or quantity

20 Quantity key To enter the quantity, in products sold in units.

21 Price key To enter the unit price manually

22 Delete key Delete selected sales item or the entire list if we do not have

any selected

23 PLU key To enter the PLUS stored search screen

24 Tare Key Weigh with container / without container

25 Zero key To zero the scale

26 Menu key To access the main menu

27 Feed key To advance the role

28 Check Key Print ticket quickly (short press)

Access the menu for account editing, discounts and payment methods (long

press).

Note: PLU keys and function keys are defined / designed according to custom settings

of the interface mode. For details, refer to the "Selecting Operation Keys" section (p. 53)

ENENUSER'S MANUAL T-TOUCH SERIES

2.2 REAR SCREEN

DISPLAY/

INDICATOR

DESCRIPTION

1 Product To display the selected product

2ATare To display the tare value

3 Total weight To display the total weight of the product

4 Unit price To display the unit price

5 Total price To display the Total price

Advertising To display the desired advertising (See page 43)

ENENUSER'S MANUAL T-TOUCH SERIES

2.3 ON-SCREEN KEYBOARD

The on-screen keyboard will open automatically to edit or enter new data.

Back

Tab: Use this key to change the field to be filled in.

Press to switch to the keyboard for special symbols and numeric keys.

Key to close the keyboard

o Change to Upper-case letter / lower-case letter

Press to switch to the main keyboard.

ENENUSER'S MANUAL T-TOUCH SERIES

3. OPERATION

3.1 FUNCTIONS

3.1.1 Switching On

During power-up, the scale will first run the operating system displaying T-Touch followed by the BAXTRAN logo. After the scale sets the current

weight as a new zero reference, the sales menu is automatically started after entering the user name and password. (Default admin / admin).

3.1.2 Display range

The scale will display the weight from -Max (tare function) to Max (gross weight)

3.1.3 Zero adjustment

Zero adjustment is performed by pressing the , key. This is only possible when the load receptor is not moving and the variation is within

the range set by metrology.

3.1.4 Tare

The tare weight of any container can be obtained by pressing the button and from that moment the net weight of the heavy object is shown.

How tare weight works:

Put the weight on the platter.

Press the key. Weight zero is displayed and the tare weight is subtracted. Remove the weight from the platter. The tare weight is displayed.

Only one tare weight value can be set. It will be shown as a negative value. This tare value can be erased by pressing the tare key when there

is no load on the platter. The tare operation cannot take place if the platter is moving.

3.1.5 Pre-Tare

POS scales have a preset tare function, press and hold the key until a pre-tare window appears to enter the tare value, clicking on the "OK"

key allows you to activate the entered value.

3.1.6 PLU (Price Look Up)

The scales can store up to 99999 unit price values, which can be accessed via the direct PLU keys or the PLU search key on the sales screen

keyboard.

3.1.7 Quantity

It allows you to calculate the total price of sales per unit (weighing results are not taken into account).

3.1.8 Gravity

The scales have a gravity compensation function that allows verification to be performed at a location with a different gravity constant from that

of the place of use. (Parameter blocked by calibration button).

3.1.9 Print

The scales have a built-in printer and printing is done automatically when the user presses the Check key to finish the collection.

3.1.10 Software version

The software is separated into weighing software, application software, keyboard software, display software, print software, etc.

ENENUSER'S MANUAL T-TOUCH SERIES

3.2 SALES OPERATION MODE

M80 S70

a. Select a salesperson.

Press the button to choose the desired salesperson

Select a vendor from the list.

displays the active salesperson for the accumulation

ENENUSER'S MANUAL T-TOUCH SERIES

SEARCH PLU (PRODUCT LOOK UP)

Search for direct PLU:

Click on the PLU of the desired category. Use the group/category key to select different product groups or categories.

Search for indirect PLU: Click on the button to enter the product search:

a) Product search via PLU number

b) Product search via alphabetical order.

ENENUSER'S MANUAL T-TOUCH SERIES

3.3 MANUAL ENTRY PRICE / QUANTITY

When product information is not preset on the scale, click to manually enter the unit price and click .

Users can also enter the quantity manually to obtain the amount of the un-

weighed products. Click the key to manually enter the quantity. (This

function can also be used with PLU configured as parts)

3.4 MANUAL / AUTO ACCUMULATION

MANUAL ACCUMULATION:

Use this application to manually add weight values to the sales list.

- Select a PLU and place the items to be weighed on the platter.

- Once the stability indicator is displayed, press the vendor key to add the line to the sales list, the scale will beep and the sales list will

add a new item to the sale.

- Remove the element from the platter and continue the next operation.

ENENUSER'S MANUAL T-TOUCH SERIES

AUTOMATIC ACCUMULATION:

Use this application to automatically add weight and quantity values.

The "operation settings" allow you to select automatic accumulation on loading or unloading.

Note: Automatic accumulation must be active,

consult Settings> Operation settings> Auto-accumulation > On loading / On unloading.

Auto-accumulation on loading:

- Select a PLU and place the item to be weighed on the platter.

- Once the stability indicator is shown on the display, the scale will

beep and the accumulation will be added to the sales list.

- Remove the article from the platter and proceed with the next op-

eration.

Auto-accumulation on unloading:

- Select a PLU and place the item to be weighed on the platter.

- Remove the item from the scale platter, the scale will beep and a

new item will be added to the sales list.

- Continue the next operation.

3.5 REMOVE ACCUMULATED PRODUCTS

Accumulation list:

Select the products from the sales list to remove them.

ENENUSER'S MANUAL T-TOUCH SERIES

Select the key to delete the selected

items.

If you have the sales list in the main window (M80), you can press

the key to delete the previously selected line.

Note: items deleted from the sales list may be retrieved. Select the deleted item and click or , as the case may be.

Note: If the main window of the user interface of your version does not have a sales list, you must select and delete

the item in the billing window.

If you click on the key in the sales window without having selected any item from the sales list, the entire sales list of the active

vendor will be deleted. Also on the sales list in the incoming billing window but by pressing .

1) Sales list

2) Selected element

3) Deleted element

ENENUSER'S MANUAL T-TOUCH SERIES

4) Deleted element selected

5) Deleted element retrieved

3.6 COLLECTION OPERATION

1. Select a vendor to make the collection, 2. press

the key to print the ticket, or press and hold

the key to access the billing menu.

2. 3.

Page is loading ...

Baxtran M80 User manual

Brand: Baxtran

Model: M80

Type: User manual

This manual is also suitable for

Download PDF

report

Baxtran M80 User manual

This manual is also suitable for

Baxtran M80 User manual

Related papers

Other documents