MSI Response 2013 User guide

Response 2013
MSI
Brand
MSI
Model
Response 2013
Category
Motherboards
Type
User guide

This manual is also suitable for

Education Software
Installer 2013 December
update
Windows® operating systems
System administrator’s guide
This guide is available in HTML. Scan the following QR code to read the
HTMLversion of this guide on your smart phone or other mobile device.
Trademark notice
SMARTNotebook, SMARTInk, SMARTResponse, Senteo, SMARTBoard, SMARTDocumentCamera, smarttech, the SMART logo and all SMART taglines are
trademarks or registered trademarks of SMARTTechnologiesULC in the U.S. and/or other countries. Microsoft, Windows, InternetExplorer, ActiveX DirectX and
VisualStudio are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Adobe, Flash and Reader are either registered
trademarks or trademarks of Adobe Systems Incorporated in the U.S. and/or other countries. InstallShield, is a registered trademark or trademark of Flexera Software, Inc.
and/or InstallShield Co. Inc. in the United States of America and/or other countries. All other third-party product and company names may be trademarks of their respective
owners.
Copyright notice
© 2013 SMARTTechnologiesULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated
into any language in any form by any means without the prior written consent of SMARTTechnologiesULC. Information in this manual is subject to change without notice
and does not represent a commitment on the part of SMART.
This product and/or use thereof covered by one or more of the following U.S. patents.
www.smarttech.com/patents
12/2013
smarttech.com/kb/170627
i smarttech.com/kb/170627
Contents
Chapter 1: Getting started 1
Computer requirements 2
Installation packages and supporting files 3
Chapter 2: Customizing installation packages 7
Using SMARTInstallManager 7
Using third-party tools 17
Chapter 3: Deploying the software 19
Using the command line interface 20
Using third-party imaging or remote management software 22
Activating the software after installation 23
Renewing keys 27
Chapter 4: Updating the software 33
Using a Windows Installer update installation package (MSI file) 33
Using a Windows Installer patch (MSP file) 35
Chapter 5: Removing the software 37
Using the user interface 37
Using the command line interface 38
Appendix A: Windows Installer properties and parameters 45
Properties 45
Parameters 56
Examples 56
Appendix B: Language files and codes 59
Installation language files and codes 59
Language packs 60
Appendix C: Installing and maintaining Gallery content 63
Installing Gallery content 64
Modifying Gallery content 69
Changing Gallery content locations 75
Appendix D: Removing previous versions of SMARTBoard software 81
Removing SMARTBoard software 9.x 81
Removing SMARTBoard software 8.x 82
Removing SMARTBoard software 7.x 84
C O N T E N T S
ii smarttech.com/kb/170627
Cleaning the registry 85
Index 87
Chapter 1
1 smarttech.com/kb/170627
Chapter 1: Getting started
Computer requirements 2
Installation packages and supporting files 3
Installation packages 3
Language files 4
This guide explains how to customize and deploy the following software:
l SMARTNotebook™ collaborative learning software 11.4
l SMARTNotebook MathTools software
l 3DTools for SMARTNotebook software
l SMARTProductDrivers 11.4
l SMARTInk™ 2.0
l SMARTResponse™ 2013 assessment software
l SMART Common Files
N O T E
For information on customizing and deploying previous versions of this software, see the
appropriate system administrator’s guides at smarttech.com/support.
This guide is intended for IT administrators and others experienced with customizing, deploying and
administering Windows® software in a networked environment. To use this guide, you must
l Know IT terminology such as “registry” and “domain controller”
l Know how to complete basic administrative tasks in Windows operating systems such as
modifying the registry
l Have administrative privileges and access to servers
l Have access to the DVD or to the Internet
C H A P T E R 1
Getting started
2 smarttech.com/kb/170627
I M P O R T A N T
You must run the commands documented in this guide in an Administrator Command Prompt
window. To open an Administrator Command Prompt window, right-click the Command Prompt
icon, and then select Run as Administrator.
Computer requirements
N O T E
Operating systems and other third-party software released after this SMART software might not be
supported.
Before you install the software, ensure your teachers’ computers meet the minimum requirements:
l Pentium® 4 processor or better
l 2 GB of RAM
l Free hard disk space:
Software Space required
SMARTNotebook software 832 MB
Gallery Essentials 575 MB
Lesson Activity Toolkit 136 MB
SMARTProductDrivers 595 MB
SMARTInk 92 MB
SMARTResponse software 521 MB
SMART Common Files 295 MB
Recommended total free hard disk space 3 GB
l Windows XP SP3, Windows 7 SP1 or Windows 8 operating system
l Microsoft® .NET Framework 4 Client Profile for SMARTNotebook software and SMARTInk
l MicrosoftVisualStudio® 2010 Tools for Office for SMARTInk
l Adobe®Flash® 11.9.900.152 ActiveX® control for SMARTNotebook software
l AdobeFlash Player 11.9.900.152 Firefox® plug-in for SMARTNotebook software and
SMARTResponse software
C H A P T E R 1
Getting started
3 smarttech.com/kb/170627
l AdobeReader® 8.0 or later
l DirectX® technology 9 or later for SMARTNotebook software and SMART Video Player
l DirectX 9 compatible graphics hardware for 3DTools for SMARTNotebook software
l InternetExplorer® Internet browser 8 or later
N O T E
If you’re deploying SMART software to Windows XP computers, you must first install Windows
Installer 4.5 on these computers. You can download Windows Installer 4.5 from
support.microsoft.com/kb/942288.
Installation packages and supporting files
Before you can customize or deploy SMART software, you must locate the installation packages and
supporting files.
Installation packages
Before deploying the Education Software Installer installation package, you must deploy the following
third-party installation packages:
If you want to install this software: Deploy these installation packages:
SMARTNotebook software
l
Microsoft .NET Framework 4 Client Profile files
(dotNetFx40_Client_x86_x64.exe)
l
AdobeFlash Player ActiveX control
(install_flash_player_11_active_x.msi)
l
AdobeFlash Player plug-in
(install_flash_player_11_plugin.msi)
SMARTProductDrivers
(including SMARTInk)
l
Microsoft .NET Framework 4 Client Profile files
(dotNetFx40_Client_x86_x64.exe)
l
MicrosoftVisualStudio Tools for Office
(vstor40_x86.exe for 32-bit computers or
vstor40_x64.exe for 64-bit computers running
32-bit or 64-bit versions of Microsoft Office)
SMARTResponse software
l
AdobeFlash Player plug-in
(install_flash_player_11_plugin.msi)
C H A P T E R 1
Getting started
4 smarttech.com/kb/170627
N O T E
You can run the dotNetFx40_Client_x86_x64.exe file to install all required Microsoft .NET
Framework prerequisites and the Microsoft .NET Framework 4 Client Profile files. However,
SMART recommends that you download the latest version of the Microsoft .NET Framework files
from the Microsoft website. For information on deploying the Microsoft .NET Framework, refer to
the .NET Framework deployment guide for administrators on the MSDN website
(msdn.microsoft.com/en-us/library/ee390831.aspx).
The third-party installation packages are located on the DVD in
[DVDdrive]:\Administrators\Windows\Education Software Install\Support.
The Education Software Installer installation package (SMARTEducationSoftware.msi) is located
on the DVD in [DVDdrive]:\Administrators\Windows\Education Software Install.
Alternatively, you can download the installation packages in a .zip file from
smarttech.com/administratordownloads. The installation packages are located in the Support folder
of the .zip file.
I M P O R T A N T
SMART recommends that you deploy SMART software using the
SMARTEducationSoftware.msi installation package. However, if you choose to deploy the
software using individual installation packages, you need to do the following:
l Deploy the SMART Common Files.msi file first.
l If you use a custom value for the INSTALLDIR property, ensure this value is identical across
all the installation packages.
Save the installation packages in a location on your network that’s accessible to all computers on
which you plan to install the software.
Language files
If you plan to deploy the installation packages in a language other than English (U.S.), ensure the
corresponding MST file for the language is in the same folder as the MSI file (see Installation
language files and codes on page 59).
Similarly, if you want users to be able to view and use the software in a language other than English,
you must download and install the appropriate language pack (see Language packs on page 60).
C H A P T E R 1
Getting started
5 smarttech.com/kb/170627
These language packs are located on the DVD under
[DVDdrive]:\Administrators\Windows\Education Software Install\Support\Languages or in
the downloaded .zip file under Support\Languages.
Chapter 2
7 smarttech.com/kb/170627
Chapter 2: Customizing installation
packages
Using SMARTInstallManager 7
Installing SMARTInstallManager 7
Using SMARTInstallManager 8
Opening an installation package 8
Saving your changes 9
Publishing your changes as an MSTfile 9
Customizing the installation package 10
Using third-party tools 17
You can customize installation packages using SMARTInstallManager.
OR
You can customize installation packages using third-party tools and Windows Installer properties.
Using SMARTInstallManager
SMARTInstallManager enables you to customize SMART software installation packages (also
known as MSI files) by publishing MST files. You can then deploy the MSI and MST files to
computers using third-party imaging or remote management software.
Installing SMARTInstallManager
Install SMARTInstallManager from the DVD.
OR
Download and install SMARTInstallManager from the SMARTSupport website.
To install SMARTInstallManager from the DVD
1. Insert the DVD in your computer’s DVD drive.
A dialog box appears.
C H A P T E R 2
Customizing installation packages
8 smarttech.com/kb/170627
N O T E
If the dialog box doesn’t appear, browse to and open [DVD drive]\CDBrowser.exe in
Windows Explorer.
2. Click Administrator Preparation and Tools, and then click Install SMARTInstallManager.
The SMARTInstallManager installation wizard appears.
3. Follow the on-screen instructions.
To install SMARTInstallManager from the website
1. Go to smarttech.com/administratordownloads.
2. Scroll to SMART Notebook collaborative learning software, click Choose a version, and then
select SMART Notebook software > 11.4 for Windows.
3. Click Download SMART InstallManager, and then click Download.
4. Save the Install Manager.exe file to your computer.
5. Double-click the Install Manager.exe file.
The SMARTInstallManager installation wizard appears.
6. Follow the on-screen instructions.
Using SMARTInstallManager
After you install SMARTInstallManager, shortcuts to the software appear on the desktop and in the
Start menu (Windows XP and Windows 7 operating systems) or the Apps screen (Windows 8
operating system).
With SMARTInstallManager, you can do the following:
l Open and customize an installation package.
l Save your changes to the installation package as an XML file.
l Publish your changes to the installation packages as an MST file.
Opening an installation package
To customize an installation package, drag its MSI file into the SMARTInstallManager window.
Alternatively, you can search for installation packages on your computer by clicking , or on CDs or
DVDs by clicking .
C H A P T E R 2
Customizing installation packages
9 smarttech.com/kb/170627
N O T E
All installation packages you’ve previously opened in SMARTInstallManager appear in the
Unmodified Packages tab.
After you open an installation package, a set of pages for that installation package appears in
SMARTInstallManager. Customize the installation package using the controls on these pages.
Saving your changes
After you customize an installation package, save your changes as an XML file by selecting
File>SaveAs. When you next start SMARTInstallManager, load the XML file by selecting
File>Open, or by opening the MSI file and then selecting File>Import.
Publishing your changes as an MSTfile
The final step in using SMARTInstallManager to customize an installation package is to publish your
changes as an MST file. To do this, select File>Publish, and then use the dialog box to define a
location for and create the MST file.
T I P
If you use an older MST file created with an earlier version of the MSI file, it might not work properly.
Use the current MSI file to create your MST file. Publish the MST file in the same location as the
MSI file.
C H A P T E R 2
Customizing installation packages
10 smarttech.com/kb/170627
Customizing the installation package
To customize the installation package, open the SMARTEducationSoftware.msi file in
SMARTInstallManager (see Opening an installation package on page 8), and then set the controls
on each page.
Control Procedure Notes
General Options: Product Selection
Activate software during
installation
Select to activate the software
automatically during installation
rather than manually after
installation.
You must include the
productkey properties for the
software you’re installing for
this property to work.
For mass activation
information, see Activating the
software after installation on
page 23.
SMARTProductDrivers Select to install
SMARTProductDrivers.
Installing
SMARTProductDrivers also
installs SMARTInk.
SMARTNotebook software Select to install SMARTNotebook
software.
Product key Type your 22- or 25-character
product key for SMARTNotebook
software.
As of version 11.1, you don’t
need to activate
SMARTNotebook software.
SMART provides you with the
right to use this software when
you purchase a SMART
interactive product.
If you want to use
SMARTNotebook software
with a device that isn’t a
SMART interactive product,
you must purchase a product
key.
You can type the product key
with or without hyphens.
When you type a volume
product key, the software
activates when you deploy it to
your network computers.
C H A P T E R 2
Customizing installation packages
11 smarttech.com/kb/170627
Control Procedure Notes
SMARTResponse
software
Select to install SMARTResponse
software.
If you choose to install
SMARTResponse software,
you must also install
SMARTNotebook software.
When you select this check
box, SMARTInstallManager
automatically selects
SMARTNotebook.
Product key If you’re installing
SMARTResponse software and
students use SMARTNotebook
SE (Student Edition) software or
SMARTResponse VE Internet-
enabled devices to answer
questions, type your 22- or 25-
character product key for
SMARTResponse software.
You can type the product key
with or without hyphens.
When you type a volume
product key, the software
activates when you deploy it to
your network computers.
SMARTNotebook Math
Tools
Select to install SMARTNotebook
MathTools software.
If you choose to install
SMARTNotebook MathTools
software, you must also install
SMARTNotebook software.
Product key Type your 22- or 25-character
product key for SMARTNotebook
MathTools software.
You can type the product key
with or without hyphens.
When you type a volume
product key, the software
activates when you deploy it to
your network computers.
SMART Notebook 3D
Tools
Select to install 3DTools for
SMARTNotebook software.
If you choose to install 3DTools
for SMARTNotebook software,
you must also install
SMARTNotebook software.
Product key Type your 22- or 25-character
product key for 3DTools for
SMARTNotebook software.
You can type the product key
with or without hyphens.
When you type a volume
product key, the software
activates when you deploy it to
your network computers.
C H A P T E R 2
Customizing installation packages
12 smarttech.com/kb/170627
Control Procedure Notes
General Options: Installation Options
Installation directory Type the path to your preferred
folder for the software.
If you specify a folder, include a
back slash (\) at the end of the
path.
If you don’t specify a folder,
Windows Installer installs the
software in [Program files]
\SMART Technologies\
Education Software where
[Program files] is C:\Program
Files for 32-bit versions of
Windows operating systems or
C:\Program Files (x86) for 64-
bit versions of Windows
operating systems.
Ensure the folder path is valid.
SMARTInstallManager doesn’t
verify the folder path.
Install Start menu and
desktop shortcuts
Select to create shortcuts in the
Start menu and on the desktop.
General Options: Language Selection
Select the language packs
you want to install
Select the language packs you
want to install.
Don’t select more than 20
language packs (see
smarttech.com/kb/170081).
Some SMART software doesn’t
support all listed languages.
General Options: SMART Product Update
Install SMART Product
Update in Full mode
Select to install
SMARTProductUpdate (SPU) in
Full mode.
In Full mode, users can view
the installed versions of
SMART software as well as
their product keys, and
download and install updates.
Install SMART Product
Update in Dashboard mode
Select to install SPU in Dashboard
mode.
In Dashboard mode, users can
view only the installed versions
of SMART software and their
product keys.
Do not install SMART
Product Update
Select to not install SPU.
C H A P T E R 2
Customizing installation packages
13 smarttech.com/kb/170627
Control Procedure Notes
Check for updates Type the number of days (1 to 60)
between SPU checks.
This option is available only if
you install SPU in Full mode.
By default, SPU checks for
product updates every 30 days.
Notify users about SMART
product updates
Select to notify users of available
SMART product updates through
the Windows notification area.
This option is available only if
you install SPU in Full mode.
General Options: Customer Experience
Enable the Customer
Experience Program on all
devices
Select to automatically enable the
Customer Experience Program for
all users.
Disable the Customer
Experience Program on all
devices
Select to automatically disable the
Customer Experience Program for
all users.
SMARTNotebook: Gallery Content
See Installing and maintaining Gallery content on page 63.
SMARTNotebook: Team Content
Team Content path Type the path to the
TeamContent folder, which is a
location on your school’s network
where users can store shared
content.
For information on creating a
TeamContent folder, see
Creating or connecting to Team
Content folders on page 77.
SMARTNotebook: My Content
My Content path Type the path to the My Content
folder, which is a location on the
user’s computer where he or she
can store individual content.
You can include environment
variables in the path.
SMARTNotebook: Optional Settings
Install print capture driver Select to include the Print Capture
Driver in the installation.
The Print Capture Driver is a
printer driver that enables users
to export content from other
programs to SMARTNotebook
software by using the
SMARTNotebook Document
Writer.
C H A P T E R 2
Customizing installation packages
14 smarttech.com/kb/170627
Control Procedure Notes
Register
SMARTDocumentCamera
drivers
Select to enable the registration of
SMARTDocumentCamera™
drivers.
Disable the registration of
SMARTDocumentCamera
drivers if they conflict with the
third-party drivers on the
computer.
If you choose to install 3DTools
for SMARTNotebook software,
SMARTInstallManager selects
this check box automatically.
You’re unable to clear it.
Enable hardware
acceleration
Select to enable hardware
acceleration.
Through hardware acceleration,
SMARTNotebook software
completes some tasks using
your computer’s graphics
processing unit (GPU) rather
than its central processing unit
(CPU). Hardware acceleration
improves the performance of
SMARTNotebook software on
most computers. However,
hardware acceleration can
cause issues on some
computers, such as content not
displaying correctly and
SMARTNotebook software not
responding. If users are
encountering these issues, you
can disable hardware
acceleration.
Copy the
SMARTNotebook tutorial
file
Select to copy the
SMARTNotebook software tutorial
file to the user’s Documents folder.
The SMARTNotebook
software tutorial file opens
when a user first starts the
software. It demonstrates how
to use the software and what’s
new in the current version of the
software.
If there is limited space on
users’ computers, you can
choose to not copy the tutorial
file to their Documents folders.
C H A P T E R 2
Customizing installation packages
15 smarttech.com/kb/170627
Control Procedure Notes
SMARTResponse: Setup Tool
SMARTResponse LE Select to enable students to
answer questions with
SMARTResponse LE clickers.
SMARTResponse PE Select to enable students to
answer questions with
SMARTResponse PE clickers.
SMARTResponse XE Select to enable students to
answer questions with
SMARTResponse XE clickers.
SMARTResponse/Senteo Select to enable students to
answer questions with
SMARTResponse or Senteo™
clickers.
SMARTResponse VE Select to enable students to
answer questions with
SMARTResponse VE Internet-
enabled devices.
SMARTNotebookSE Select to enable students to
answer questions with
SMARTNotebook SE in
SMARTResponse CE mode.
C H A P T E R 2
Customizing installation packages
16 smarttech.com/kb/170627
Control Procedure Notes
Multiple SMARTResponse
devices in the same class
Select to enable students to
answer questions with Senteo,
SMARTResponse,
SMARTResponse LE,
SMARTResponse PE or
SMARTResponse XE clickers, or
SMARTNotebook SE.
Select Include
SMARTResponse VE to also
enable students to answer
questions with SMARTResponse
VE Internet-enabled devices.
SMARTResponse: Optional Settings
Start Desktop Menu at log
in for all users
Select to start SMARTResponse
software when the user logs on.
Install the education
standards database
Select to install the
SMARTResponse education
standards database.
File port Type the port number for the file
data channel.
OR
Type * to use a random port
number for the file data channel.
This control is applicable only if
students answer questions with
SMARTNotebook SE.
The default port is 23458.
Secure Base port Type the port number for the
encrypted data channel.
OR
Type * to use a random port
number for the encrypted data
channel.
This control is applicable only if
students answer questions with
SMARTNotebook SE.
The default port is 23457.
Certificate file Type the path to the certificate file
for SSL digital certificate
encryption.
OR
Click Browse and then browse to
and select the certificate file.
This control is applicable only if
students answer questions with
SMARTNotebook SE.
SMARTResponse: SMART Response VE Server
Local server website Type the URL of the
SMARTResponse VE Server (for
example,
http://response.example.com).
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

MSI Response 2013 User guide

Response 2013
MSI
Brand
MSI
Model
Response 2013
Category
Motherboards
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents