2. ROOMS TO GO
  3. 40E296BK-04

ROOMS TO GO 40E296BK-04, 26050233, 26050245, 26050257 Operating instructions

  • Hello! I've reviewed the assembly instructions for the E296-04 End Table. This document provides a parts list and step-by-step instructions for assembling the table, along with cleaning and care guidelines. I am here to help answer any questions you might have about the contents of this document or the assembly process itself.
  • What is included in the box?
    What should I do before assembly?
    When should I tighten the screws and bolts?
ASSEMBLY INSTRUCTION
1
E296-04 END TABLE
A B C D
EFG
Flat Washer
1/4” x Ø5/8”
Top Panel
18PCS 8PCS
1PC 1PC 1PC 2PCS
Shelf Side Frame
Bolt
1/4”*3/4” F
Bottom Panel
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to
protect them from damage.
1PC
Allen Wrench
4MM
2
***Do not tighten screws & bolts until the entire unit is completely assembled.
1
2
Assembly the Top Panel (A) and Bottom Panel (B) onto the Side Frame (D), then using the
Bolt (E) and Flat Washer (F) by Allen Wrench (G).
Assembly the Shelf (C) onto the Side Frame (D) and using the Bolt (E) by Allen Wrench (G).
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces
with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time.
Periodically check that all connections are tight.
EG
D
C
C
GED
G
E
F
D
A
D
D
D
A
B
B
/