2. ROOMS TO GO
  3. 22181907

ROOMS TO GO 22181907 Assembly Instructions

  • Hello, I've reviewed the assembly instructions for the Cocktail Table E819-30. The document lists all the parts including a wood top, side panels, bolts, and an allen wrench. It emphasizes care for the scratch-resistant surface and advises against using abrasive cleaners. I'm ready to answer any questions you have about assembling this table.
  • What should I do before starting assembly?
    Should I tighten the screws and bolts immediately?
    How should I care for the table surface?
1
ASSEMBLY INSTRUCTION
E819-30 COCKTAIL TABLE WITH FAUX MARBLE TOP
A
Wood Top
B
Upper Side Panel
C
Under Side Panel
1pc
1pc
D
Bolt
E
Bolt
F
Allen Wrench
1/4” x 1/2”
1/4” x 1-1/4”
1/4”
8pcs
1pc
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to
protect them from damage.
2
*** Do not tighten screws & bolts until the entire unit is completely assembled.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry
or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
1
Attach Upper Side Panel (B) to Wood Top (A) by Bolt (D) and Allen Wrench (F) as shown.
Attach Under Side Panel (C) to Wood Top (A) by Bolt (D) and Allen Wrench (F). Then attach
two side panels together by Bolt (E) and Allen Wrench (F) as shown.
2
A
/