WiFi Adapter
How to set up the WiFi Adapter:
1. Insert the driver CD, select proper file
for your system"Windows/Mac/Linux"
2. Double click" setup.exe "to start
installation. Select " Next“ and Keep select"
Next"
3. Wait for the installation to complete
4. Select "Restart" the computer or you can
choose " Not" It's up to you.
5.Insert the WiFi Adapter Network Card,the
system will find the new hardware and will
install the drivers automatically.
6. Then go on your PC's networking setting,
Choose" Network and Sharing Center" then find
the " Change adapter option"
7. When you finish setup, there will be a new
wireless network icon when you click above"
change adapter option"