CP Plus F41A Installation guide

F41A
Brand
CP Plus
Model
F41A
Type
Installation guide

CP Plus F41A: Advanced Security Camera with Voice Control, H.265 Encoding, and Multiple Connectivity Options

  • Voice Control: Works with Alexa or Google Assistant for hands-free control of the camera and video streaming.

  • High-Quality Video: Captures clear and crisp footage with H.265 encoding for efficient storage and bandwidth usage.

  • Easy Installation: Simple bracket mounting and screw terminal connection for quick and hassle-free setup.

  • Wi-Fi Connectivity: Connects to your existing Wi-Fi network for remote access and control via the ezykam+ app.

  • Multiple Device Control: Manage and control multiple cameras from a single app, allowing you to monitor different areas of your property.

CP Plus F41A: Advanced Security Camera with Voice Control, H.265 Encoding, and Multiple Connectivity Options

  • Voice Control: Works with Alexa or Google Assistant for hands-free control of the camera and video streaming.

  • High-Quality Video: Captures clear and crisp footage with H.265 encoding for efficient storage and bandwidth usage.

  • Easy Installation: Simple bracket mounting and screw terminal connection for quick and hassle-free setup.

  • Wi-Fi Connectivity: Connects to your existing Wi-Fi network for remote access and control via the ezykam+ app.

  • Multiple Device Control: Manage and control multiple cameras from a single app, allowing you to monitor different areas of your property.

System Requirements
5.0 or higher
• Existing Wi-Fi Network with internet connection
Technical Specications
H.265 encoding
• Audio: Internal Speaker and Microphone
included)
using your new devices by downloading ezykam+ app,
one convenient app that manages everything straight
from your smart phone. Easily connect to your home
Wi-Fi and control multiple devices from the touch of
your ngertips
Register an account on your ezykam+ app. Add Camera
• Open ezykam+ app, click “+” on the top right corner of
voice prompt is audible.
2.
Plug in
How do I reset my camera?
• Use the reset pin to press the Reset Button
for several seconds until the camera starts to
beep.
3.
4.
and click “Continue”.
a voice prompt, click “Heard the beep”
Add Camera
4.0
** Please read the instrucon carefully before
using the product **
For further assistance, you can reach us via
ezyc[email protected]om
Quick Operation Guide
Quick Operation
Guide
ezykam Wi-Fi Camera
Reset
When the indicator light on the device turn to steady
blue light, the network conguration is complete.
there are any difference.
Add Camera
4.1
Frequently Asked Questions
Can I share camera with family and friends?
Yes, you can share your cameras with family and
friends who will have access to view the camera.
1.
How many cameras can I control?
cameras in unlimited amount of locations. Your
router may have a limit of how many cameras can
be connected to one router.
5.
The camera appears offline or unreachable?
Make sure you entered the correct Wi-Fi password
during the Wi-Fi setup. Check whether there is any
Internet connection problem. If the Wi-Fi signal is
too weak, reset your Wi-Fi router and try again.
3.
What's the Wireless Range?
The range of your home Wi-Fi is heavily dependent
on your home router and the conditions of the
room. Check with your router specications for
2.
exact range data.
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password
during the Wi-Fi setup. Check whether there are
any Internet connection problems. If the Wi-Fi
signal is too weak, reset your Wi-Fi router and try
4.
again.
Installation Instruction
Power cord colors respectively
Power cord connection diagram
Tighten the two wires
Nut + power cord
(rotate and tighten)
Firewire + Firewire connection 1
2
3
Tighten the screw
Mounting screws
Rubber cap
6
5
1
There is a junction
box on the wall
Bracket installation
Mounting brackets
2
The dustproof pad is attached to the bottom of
the product
bottom position of the
product
3
Ground wire
4
1. Black: live wire (L)
2. White: zero wire (N)
3. Yellow + Green:
ground wire (E)
Bracket / screw
Screw accessories Rubber cap Screw terminal
Dust pad
• Enter the verication
code and create a
password
• Select the country.
• Enter the email address.
• Enter your “Wi-Fi network and password”,
F41A
*Alexa capability only include streaming video and not controlling the light.
Voice control works with Alexa
or Google Assistant
You can control your camera using just your voice
with Alexa or Google Assistant-enabled devices.
Get Ready
• Know your Wi-Fi network and password.
higher or Android™ 5.0 or higher.
Download the ezykam+ app from App Store
or on Google Play.
1.
  • Page 1 1

CP Plus F41A Installation guide

F41A
Brand
CP Plus
Model
F41A
Type
Installation guide

CP Plus F41A: Advanced Security Camera with Voice Control, H.265 Encoding, and Multiple Connectivity Options

  • Voice Control: Works with Alexa or Google Assistant for hands-free control of the camera and video streaming.

  • High-Quality Video: Captures clear and crisp footage with H.265 encoding for efficient storage and bandwidth usage.

  • Easy Installation: Simple bracket mounting and screw terminal connection for quick and hassle-free setup.

  • Wi-Fi Connectivity: Connects to your existing Wi-Fi network for remote access and control via the ezykam+ app.

  • Multiple Device Control: Manage and control multiple cameras from a single app, allowing you to monitor different areas of your property.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents