Esatto ECGG604W User manual

Type
User manual

This manual is also suitable for

Version
V1.5 0923
Everything you need
for your Gs on Glss
Cooktop is in this
User Mnul
Model/s
ECGG604W
ECGG905W
User Manual
2
Welcome
Congrtultions on purchsing your new Gs Cooktop. The Estto brnd is
proudly distributed within Austrli by Residenti Group Pty Ltd.
Plese refer to the wrrnty crd t the rer of this mnul for informtion
regrding your product’s prts nd lbour wrrnty, or visit us online t:
www.residenti.group
At Residenti Group, we re customer obsessed nd our Support Tem re
there to ensure you get the most out of your pplince. Should you wnt to
lern more bout your new gs cooktop, it's fetures or importntly tking
cre of the pplince, our Support Tem re here to help.
You cn use our online Support Centre t nytime by visiting:
http://support.residentigroup.com.u
Or you cn contct us vi phone by diling: 1300 11 HELP (4357).
It is importnt tht you red through the following use nd cre mnul
thoroughly to fmilirise yourself with the instlltion nd opertion
requirements of your pplince to ensure optimum performnce.
Agin, thnk you for choosing n Estto pplince nd we look forwrd
to being of service to you.
Kind Regrds,
The Residenti Tem
Residenti roup
Head Office
165 Brkly Avenue
Burnley, Victori
Austrli 3121
ACN
600 546 656
Online
residenti.group
www.estto.house
@estto.house
Postage
PO Box 5177
Burnley, Victori
Austrli 3121
Telephone
1300 11 4357
www.esatto.house
esatto.house
3
Page 2
Welcome
Page 4
Safety Instructions
Page 6
Product Overview
Page 8
Before First Use
Pge 9
Using Your
Cooktop
Pge 10
Burners
Page 11
Cleaning  Care
Page 12
Troubleshooting
Pge 13
Technicl Dt
Pge 14
Instlltion
Instructions
Pge 16
Gs Connection
Pge 19
LPG Conversion
Page 20
Electrical
Connection
Page 21
Testing Appliance
Operation
Pge 23
Purchse Detils
Pge 24
Wrrnty
Contents
User Manual
4
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP
FOR FUTURE REFERENCE
Read this manual thoroughly before rst use,
even if you are familiar with this type of product.
The safety precautions enclosed herein reduce
the risk of re, electric shock and injury when
correctly adhered to. Make sure you understand
all instructions and warnings.
Keep the user manual in a safe place for future
reference, along with the completed warranty
card and purchase receipt. If you sell or transfer
ownership of this product, pass on these
instructions to the new owner.
Always follow basic safety precautions and
accident prevention measures when using an
electrical appliance. The following statements you
will see in this booklet have these meanings:
WARNING: Indicating information concerning
your personal safety.
CAUTION: Indicating information on how
to avoid damaging the appliance, benchtop
or cabinetry.
IMPORTANT: Indicating tips and information
about use of the appliance.
USAGE CONDITIONS AND RESTRICTIONS
Domestic use only: This appliance is intended
for indoor household use only. It is not intended
for commercial, industrial or outdoor use. It is
not intended for use in a recreational vehicle.
Purpose: Do not use this appliance for anything
other than its intended purpose. Other uses are
not recommended and may cause re, electric
shock or personal injury.
Attachments: The use of attachments is not
recommended by the appliance manufacturer
and distributor as they may be hazardous.
Improper use: Damage due to improper use,
or repairs made by unqualied personnel will
void your warranty. We assume no liability
for any eventual damages caused by misuse
of the product or noncompliance with these
instructions.
BEFORE USING YOUR APPLIANCE
This manual explains the proper use of your new
Esatto cooktop. Please read this manual carefully
before using the product. This manual should
be kept in a safe place for handy reference. This
rangehood is a domestic appliance which has been
manufactured and tested to comply with Australian
and New Zealand Standard AS/NZS 5263.
This cooktop must only be installed in accordance
with the instructions provided. Incorrect
installation may cause harm to persons, damage
property and void the product’s warranty.
Read the following carefully to avoid damage
or injury.
IMPORTANT: Check for any damage or marks.
If you nd the appliance is damaged or marked,
you must report it within 7 days if you wish to
claim for damage/ marks under the manufacturers
warranty. This does not aect your statutory rights.
Sfety Instructions
esatto.house
5
WARNING: Follow these instructions carefully
to avoid injury or damage to your appliance.
Do not allow pots to boil dry, as damage to both
pan and cooktop may result.
Do not operate the cooktop for an extended
period without a pot or pan on the burner.
Do not allow large cookware to overhang the
cooktop onto adjacent benchtop. This will cause
scorching to the benchtop surface.
Do not allow cooking pots or pans to intrude into
the area which is close to the controls.
Ensure burner bodies and trivets are properly
located on the cooktop (i.e. correctly assembled
and positioned).
CAUTION: Follow these instructions carefully
to avoid an electric shock or re.
It is important to use your cooktop safely. Check
these safety points before using your cooktop.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure they do
not play with this appliance.
During use, this appliance becomes hot. Care
should be taken to avoid touching hot surfaces.
To avoid burns, young children should be kept
awa y.
Prolonged intensive use of the appliance may
call for additional ventilation, for example
opening of a window, or increasing the level of
mechanical ventilation where present.
Keep vents clear of obstructions.
In order to avoid a re, this appliance must be
kept clean.
Do not spray aerosols in the vicinity of this
appliance while it is in operation.
Do not store ammable materials on or under
this appliance, e.g. aerosols.
Do not remove the trivet and enclose the burner
with a wok stand as this will concentrate and
deect heat onto the burner.
Do not use large pots or heavy weights
which can bend the trivet or deect ame onto
the burner.
Do not place anything, e.g. asbestos mat
between pan and trivet as serious damage to the
cooktop may occur.
For maximum stability, ensure pots and pans are
centrally located on the trivets.
Handles should be turned away from the front of
the bench to avoid accidents.
Do not modify this appliance.
This appliance cannot be installed on
marine craft such as yachts or in caravans
and mobile homes.
Do not use this appliance as a space heater.
This appliance is not suitable for installation
with aftermarket lids or covers..
UNPACKING
During transportation, protective packaging was
used to protect the appliance against any damage.
After unpacking, please dispose of all elements of
packaging in a way that will not cause damage to
the environment.
All materials used for packaging the appliance are
environmentally friendly; they are 100% recyclable
and are marked with the appropriate symbol.
CAUTION: During unpacking, the packaging
materials (polythene bags, polystyrene pieces, etc.)
should be kept out of reach of children.
DISPOSAL OF THE APPLIANCE
Old appliances should not simply be disposed
of with normal household waste and should be
delivered to a collection and recycling centre for
electric and electronic equipment. A symbol shown
on the product, the instruction manual or the
packaging shows that it is suitable for recycling.
Materials used inside the appliance are recyclable
and are labelled with information concerning this.
By recycling materials or other parts from used
devices you are making a signicant contribution
to the protection of our environment.
Information on appropriate disposal
centres for used devices can be
provided by your local authority.
User Manual
6
Product Overview
YOUR COOKTOP
Figure 1A ECGG604W
Figure 1B ECGG905W
KEY
A. Toughened Blck Glss
B. Burner Control Knobs
C. Cst Iron Trivets
D. Auxiliry Burner
E. Semi Rpid Burner
F. Rpid Burner
G. Wok Burner
A
B
D
E
C
E
G
AC
ED
E F
G
B
esatto.house
7
THE BURNER
Figure 2A
COOKTOP COMPONENTS ACCESSORIES
Your Estto cooktop is supplied with:
1 × Cooktop
1 × Wok support trivet
1 × Gs regultor vlve
4 × Injector (ECGG604W)
5 × Injector (ECGG905W)
1 × Pressure joint
4 × Brckets
4 × Sponges
4 × Screws
1 × Elbow
1 × User Mnul
1 × Quick Strt Guide
Figure 2B
Burner Flame Ports
Ignition Spark Plug
Flame Safeguard Sensor
Skirt
Burner
Injector
Note: The images in this user manual are for reference only. Your appliance may appear dierently.
User Manual
8
INSTALLATION
An uthorised person must instll this pplince
nd MUST provide  Certicte of Complince.
This certicte should be retined long with
purchse informtion.
Before using the cooktop, ensure tht ll
pcking mterils re removed from the
pplince.
In order to void ny potentil hzrd, the
instlltion instructions in this booklet, nd ny
lbels on the pplince must be followed.
Ensure tht ll specied vents, openings nd ir
spces re not blocked.
Where the pplince is built into  benchtop,
the benchtop mteril must be cpble of
withstnding 85°C.
Ensure tht the duplicte rting lbel
(in the instruction pck) is ttched to 
redily ccessible djcent surfce, so tht the
cooktop cn be esily identied in the cse of
 service cll.
SERVICING
Servicing MUST only be crried out by
uthorised personnel.
To mintin sfe opertion, it is recommended
tht the product be inspected every ve yers
by n uthorised service person.
If the supply cord is dmged, it must be
replced by the mnufcturer, its service gent
or similrly qulied persons in order to void
 hzrd.
WARNING: Never instll  cooktop tht hs
been dmged. Plese contct our Service Tem
for ssistnce.
CLEANING
Alwys ensure the pplince is turned o
before clening.
This pplince contins luminium ttings.
Do not use custic bsed cleners.
Do not use stem cleners s this my cuse
moisture build up on electricl components.
Alwys clen the pplince immeditely fter
ny food spillge.
Do not plce ny components in  dishwsher.
Refer to the Clening  Cre section on pge 11
of this user mnul for instructions on clening
nd mintining your glss hob pnel.
CAUTION: Never plce burners or trivets in
 dishwsher.
Before First Use
esatto.house
9
STANDARD BURNER
Figure 3A
TRIPLE RING WOK BURNER
Figure 3B: ECGG604W Figure 3C: ECGG905W
Both rings of the wok burner operte between
knob rottion settings ‘1’ nd ‘9.
NOTE: Gs controls turn nticlockwise from ‘OFF’
nd hve limited movement.
CONTROLS
Ech burner is controlled by  control knob.
The mrkings on the control pnel indicte which
burner the knob controls, nd the setting for tht
burner (See Figure 3).
LIGHTING BURNERS
Electronic ignition: These cooktops re tted with
mins powered ignition. When the pplince hs
been connected nd the power is on, depressing
ny knob will relese sprks to ll burners.
CAUTION:
Keep hnds cler of burners when lighting.
If burner does not light within 5 seconds, turn
knob to ‘OFF’ position, wit to llow gs to
disperse nd then try lighting gin.
Burners MUST be operted between ‘1’ nd ‘9
settings only.
To light  burner, the knob must be turned to the
position, then pushed down s fr s possible
for pproximtely 5 seconds. If the me goes
out when the knob is relesed simply depress the
knob gin, this time holding it down with slightly
more force for the sme length of time.
The height of the me cn be vried by turning
the control knob towrd the ‘1’ position.
NOTE: When the wok burner is turned to setting 1,
only the smll inner ring stys lit. This is  norml
function of the dul wok burner to provide  very
low power me option.
In the bsence of electricl power, crry out the
ignition directly to the burner with  hnd held
ignition source.
Using Your Cooktop
Note: The diagrams in this user manual are for reference only. Your appliance may appear dierently.
User Manual
10
Burners
CHOICE OF BURNER
For your convenience there is  choice of burners
to choose from:
A smll Auxiliry burner for specil low het
nd slow cooking. Minimum pn size 120mm
(Mximum 160mm).
A medium Semi-Rpid burner for norml
cooking nd simmering. Minimum pn size
160mm (Mximum 180mm).
A lrge Rpid burner (ECGG905W only) for fst
heting nd lrge pots nd pns. Minimum pn
size 200mm (Mximum 240mm).
A Triple Ring wok burner for very fst heting
using  wok or lrge pot or pn. Minimum pn
size 200mm (Mximum 240mm).
To conserve gs plce the pn centrlly over the
burner nd djust the me so tht it does not
extend pst the edge of the pn (Figure 4). Do not
boil food too rpidly. A vigorous boil will not cook
food ny fster, nd will wste energy.
Figure 4
POTS AND PANS
All common pots nd pns; luminium,
stinless steel, cst iron, cermic, etc., my
be used on your new gs cooktop. Ensure tht
the pots or pns re stedy nd hve t bses
to void dngerous spill-over of hot liquids nd
wsted energy.
CAUTION:
Never use sbestos mts, wire mts or grids,
or luminium foil s it cn led to overheting,
crcked enmel or broken glss. The wrrnty will
be void if these items re used nd cuse  filure.
Woks should only be used on the wok burner nd
the wok support trivet. Refer to Figure 1A  1B on
pge 6 depending on your model.
INCORRECT
A me tht is too high will
cuse gs wstge long
with possibility of heting
or dmge to your hndles.
CORRECT
For  lrge burner,
use  lrge utensil.
CORRECT
A correct me height will
sve gs usge.
CORRECT
For  smll burner,
use  smll utensil.
esatto.house
11
Clening  Cre
CAUTION:
Ensure the pplince is o nd cool before
clening.
TRIVETS
Persistent stins my require rubbing with 
nylon scourer or cremed powder clensers.
Household enmel cleners re vilble, follow
the mnufcturer’s instructions in their use.
Hrsh brsive cleners, powder cleners,
steel wool or wx polishes should not be used.
GLASS HOB
The glss used s the primry hob hs been
toughened nd mnufctured to the highest
possible stndrds for both sfety nd relibility.
However, it must be remembered tht s it is
glss, it my brek. Tret it ccordingly. To clen
the glss hob use  soft cloth or sponge with
detergent nd wrm wter.
CAUTION: Try to clen up nd remove spillges
immeditely, while the hob is still hot! Especilly
sugr nd foods with  high sugr content
(eg. jm), melted plstics nd foil, ll of which cn
dmge the hob if left.
WARNING! If the surfce is crcked, switch o
the pplince immeditely to void the possibility
of electric shock.
If the hob requires extensive clening:
1. Remove soilge using the rzor blde scrper.
Angle the scrper t pprox. 45° nd scrpe
wy the spillge. The rzor blde cn be
pressed down hrd onto the hob without
cusing ny dmge.
2. Use  hob clener product fter there hs been
sucient time llowed for the hob to cool.
Shke the bottle nd pply  smll quntity of
clener directly onto the hob.
Rub clen using  dmp cloth or pper towels.
3. Use  dmp cloth to remove ll remining
trces of the clener, which could otherwise
burn on when the hob is next used. Wipe the
hob dry.
TRIVETS AND BURNERS
These cn ll be lifted o nd removed for
seprte clening.
CAUTION: When retting the burners, ensure
tht they re correctly seted.
Ensure burners re thoroughly dried fter clening
or spillge. When clening the burners, ensure
tht ll the me ports re free of ny blockge
(refer to Figure 2B on pge 7). If necessry, use
 toothpick or brush to cler ports. The outer
surfce of the burner cps hve  polished
nish nd extr cre needs to be tken to void
scrtching this surfce during clening. In
instnces of hevy soiling, it my be necessry to
pply  non-brsive clening compound nd rub
with  cloth until the soiling is removed nd then
nish with  soft, dry cloth.
WARNING:
NEVER plce trivets or burners in the dishwsher.
IGNITION SPARK PLUG
FLAME SAFEGUARD SENSOR
Gently clen the ignition sprk plug nd me
sfegurd sensor with  dmp cloth to void
lighting diculties. Ensure tht they re dry
before use.
INJECTOR
Ensure the injector remins free of ny foreign
mteril. If necessry, use  thin piece of wire to
cler the orice.
User Manual
12
Troubleshooting
If you hve  problem with the cooktop, check the tble below. You my be ble to solve the problem
nd this will sve you from pying for  service cll. You will hve to py for  service cll even in the
wrrnty period if the problem is one listed below.
Tble 1
PROBLEM POSSIBLE CAUSE SOLUTION
Burner will not light
even though the
sparker is working
Knob not held down long enough in ‘9’
position for ame safeguard.
Repeat lighting procedure and
hold knob down for 5 seconds in
‘9’ position. (Refer page 9).
Gas supply valve turned o. Turn on gas supply to appliance.
Wrong knob turned.
Ensure the knob you are turning
corresponds to the burner you
want to light.
Port blockage in ignition area. Ensure that ports in ignition area
are clean and dry.
Ignition spark plugs wet or dirty. Dry or clean ignition spark plugs.
No spark is obtained
when control knob is
activated
Electricity supply is disconnected or
switched o.
Switch on electricity or check
fuses.
Ignition spark plugs wet or dirty. Dry or clean ignition spark plugs.
Flames uneven or
tending to lift
Flame ports blocked or wet. Clean or dry ame ports.
Burner cap incorrectly tted. Ensure this component is
tted correctly.
Flames not staying on
when knob
is released
Knob not held down long enough in ‘9’
position for ame safeguard to engage.
Repeat lighting procedure and
hold knob down for 5 seconds in
‘9’ position. (Refer page 9).
Knob not set between ‘1’ and ‘9’ Knob MUST be set between
these positions.
Dirt or spillage on ame safeguard
sensor. Clean ame safeguard sensor tip.
Low heat, slow
cooking
Incorrect cooking pot or pan being
used. Refer to Figure 4 (page 10).
Benchtop or knobs
overheating
Incorrect cooking pot or pan being
used. Refer to Figure 4 (page 10).
Pot or pan not located on burner
properly.
Ensure pot or pan is centrally
located on burner.
esatto.house
13
Technicl Dt
Estto reserves the right to lter these specictions. This pplince conforms to AS/NZS 5263.
Tble 2
FEATURES ECGG604W ECGG905W
Burners 4 5
Wok Yes, triple ring Wok Yes, triple ring Wok
Ignition 220–240V~ 220–240V~
Trivet Cast Iron Cast Iron
Hob Material Toughened Glass Toughened Glass
Features Ignition under knob Ignition under knob
Flame Failure Safety Yes Yes
Colours Black Glass Black Glass
Gas Types NG (LP conversion
kit supplied)
NG (LP conversion
kit supplied)
COOKTOP PHYSICAL DIMENSIONS mm
Width 600 900
Depth 510 510
Height 100 100
CUT OUT DIMENSIONS mm
Width 560 830
Depth 490 490
ENERGY RATING NG  MJ/h
Auxiliary burner 4.3 4.3
Semi Rapid burner × 2 6.3 6.3
Rapid burner N /A 10.8
Wok burner 13.5 13.5
Total MJ/h 30.4 41.2
User Manual
14
Instlltion Instructions
This pplince must be instlled by n uthorised person nd in complince with:
AS/NZS 5601.1 Gs Instlltions Prt 1: Generl Instlltions, nd AS/NZS 5601.2 Gs Instlltions
Prt 2: LP Gs instlltions in crvns nd bots for non-propulsive purposes, or the relevnt
instlltion code for gs pplinces in your country.
The locl gs tting regultions, municipl building codes, electricl wiring regultions nd ny other
relevnt sttutory regultions.
The prticulr instructions s given below.
A certicte of complince MUST be given to the customer fter the ppliction is successfully
instlled.
CAUTION: Cooktops re supplied set up for nturl gs (NG). To use on LPG, the injectors must be
chnged using the conversion kit supplied. Refer LPG Conversion on pge 19.
Figure 5A ECGG604W Figure 5B ECGG905W
* Minimum clernce from cut-out to combustible surfce.
NOTE: This dimension is not relevnt if the djcent surfce is non-combustible.
600
510
490
100
560
Gas Supply
Connection
120*
145*
90
*
900
510
490
100
Gas Supply
Connection
130*
110*
130*
830
esatto.house
15
INSTALLATION PROCEDURE
The bench cutout should be mde s per
cutout dimensions in Tble 2 nd Figure 5A
5B (depending on your model).
Adjcent wlls, cupbords nd protection
for combustible mterils: Ensure tht the
pplince is instlled in ccordnce with
AS/NZS 5601.1, or AS/NZS 5601.2 with regrd
to clernces to combustible surfces nd
mterils, nd clernces to rngehoods nd
exhust fns.
To ensure clernces to combustible
surfces observe the minimum distnce
requirements shown in Figure 5A  5B
(relevnt to your model).
Clernces to combustible surfces my be
reduced if combustible surfces re protected
in ccordnce with AS/NZS 5601.1, or
AS/NZS 5601.2.
Brrier: A brrier must be instlled to prevent
ccidentl contct with the cooktop bse,
where the bse of the cooktop is ccessible
from below (i.e. Inside  cupbord, etc.).
A minimum clernce of 25mm must be
mintined between the bse nd the brrier.
This brrier my be mde of ny non-
combustible, rigid mteril.
Brrier protection is not necessry if the
product is instlled bove n underbench oven
or similr pplince nd/or if the cupbord
construction is such tht the underside of the
cooktop is not ccessible.
Ensure tht there is n erthed power outlet
within 900mm of the rer right hnd side of
the cooktop when instlled. This should be
ccessible t ll times.
A self-dhesive Fom Tpe hs been provided
to ct s  seling gent nd is to be plced
round the edge of the hob underside. Ensure
tht there re no gps in the Fom Tpe. Tke
cre to ensure tht the sels meet without
overlpping. The thickness of this Fom Tpe is
3mm nd the width is 10mm.
WARNING: Do not use  silicon selnt to
sel the pplince ginst the benchtop. This
will mke it dicult to remove the pplince
should the cooktop need  service.
Fit the pull down clmps supplied to
ensure tht the cooktop cnnot move fter
instlltion. Refer to Figure 6 nd the following
instructions.
Remove ny excess sel visible fter
instlltion
WARNING: Filure to x the cooktop to the bench
could result in loosening of the gs connection
through movement of the cooktop nd  gs lek
my result.
Clmps nd screws re supplied with ech
cooktop. Fit the clmps s shown in Figure 6.
When benchtops re less thn 35mm in thickness,
it my be necessry to t  spcer between the
benchtop nd ech clmp to ensure clmps cn
be tightened suciently.
FITTING THE CLAMPS
Ensure tht the hob is free from ll burner
pieces nd trivets. Plce the hob upside down
on  soft surfce to protect both the hob nd
your worksurfce from dmge.
Plce the brcket (B) over the holes tht mtch
the size of the screws. There re one set of
screw holes in ech corner of the hob. Slightly
tighten  screw (C) through the brcket (B) so
tht the brcket is ttched to the hob whilst
still llowing you to djust it’s position.
Crefully turn the hob bck over nd then
gently lower it into the perture hole tht you
hve cut-out in your benchtop.
On the underside of the hob, djust the
brckets into  position tht is suitble for your
benchtop. Then fully tighten the screws (C) to
secure the hob into position.
Figure 6
Installing the appliance
Sponge
Bottom view
The thickness of the sponge is 3 mm.
The width of the sponge is 10 mm.
of the screws.There are one set of screw holes in each
corner of the hob (H) .
Slightly tighten a screw (C) through the bracket (B) so
that the bracket is attached to the hob, but so that you
can still adjust the position
.
.2 Carefully turn the hob back over and then gently lower
it into the aperture hole that you have cut out.
.3 On the underneath of the hob, adjust the brackets into
a position that is suitable for your worktop.
Then fully tighten the screws (C) to secure the hob into
position.
(A) SEALING STRIP
(C) SCREW (B) BRACKET
17
Remove the pan supports, the burner lid
and flame spreader and carefully turn the
appliance upside down and place it on a
cushioned mat.
Take care that the Ignition devices and
flame supervision devices are not damaged
in this operation.
2. Apply the sponge provided around the
edge of the appliance.
3.
1.
Do not leave a gap in the sealing agent or
overlap the thickness.
3ODFHWKHEUDFNHW %RYHUWKHKROHVWKDWPDWFKWKHVL]H
7KLVZLOOPDNHLWGLI¿FXOWWRUHPRYHWKH
DSSOLDQFHIURPWKHDSHUWXUHLQIXWXUH
SDUWLFXODUO\LILWQHHGVWREHVHUYLFHG
Do not use a silicon sealant to seal the
appliance against the aperture.
(A) SEALING STRIP
(B) CLAMP
(C) SCREW
User Manual
16
Gs Connection
WARNING: This pplince must be instlled
nd connected in ccordnce with instlltion
regultions in force in the country in which the
pplince is to be used.
This pplince is supplied to run on LPG nd
nturl gs. Conversion for use on LPG nd
nturl gses must only be undertken by 
qulied person.
INSTALLATION OF APPLIANCE
Note: Wer protective gloves to t the hob.
CAUTION: lf it is necessry to djust or instll
the elbow, it is llowed only torque wrench with
9±1N.m, nd work on the Blck nut of mnifold
insted of on the elbow.
ADJUSTING THE DIRECTION OF ELBOW
After loosening the elbow, djust the elbow
interfce to the required direction s required,
nd keep the hexgonl hed of the elbow
motionless with  wrench. Use  9±1N.m torque
wrench to tighten the blck bolt of the gs inlet
pipe ssembly. Ensure tht the torque of the
wrench is within the required rnge to prevent
elbow brekge or dmge cused by excessive
force. After the instlltion is tightened, check
whether the prts re in good condition nd test
the ir tightness to ensure the tightness of the
instlltion. The instller is responsible for the
results of the process.
WARNING: Dnger of leks!
If ny connection is hndled, check the sel.
The mnufcturer is not lible for ny connection
leking, fter being hndled.
OPERATION ON N.G./S.N.G
This appliance is supplied for use with Natural
Gas. However, it can be converted for use with
LPG. Refer to LPG Conversion on page 19.
SUPPLY PIPE SIZING
The total hourly gas consumption for the
appliance is shown on the data label. The required
supply pressure (i.e. at inlet to appliance regulator)
for each gas type is shown on the data label, and
given in Table 3 (page 18). Use this information
in conjunction with the length of run, number
of elbows, tees and bends, the available service
pressure and the supply requirements of other
installed appliances to determine a suitable
pipe size.
For assistance in this matter refer to the
appropriate section of AS/NZS 5601.1 or
AS/NZS 5601.2.
An AGA certied class B or D exible connection
may be used to connect the cooktop in
accordance with AS/NZS 5601.1, in particular
section 5.9 and clause 6.10.1.8, or AS/NZS 5601.2,
in particular section 2.11.
Where a hose assembly is used and the cooktop
is in the installed position, the hose assembly shall
be suitable for connection to a xed consumer
piping outlet located at a point 800 – 850mm
above the oor and in the region outside the width
of the appliance to a distance of 250mm. The
point of connection to consumer piping must be
accessible with appliance installed.
ELBOW POSITIONING
It is possible to reposition the elbow if required
by loosening the locking nut and elbow by using
two spanners. Re-tighten the entire assembly after
the elbow has been repositioned. When tting
elbow to appliance, ensure that the sealing washer
is tted.
Note to Installer: Assembly of elbow to manifold
at rear of unit requires two spanners to secure
locking nut and ensure leak free connection.
For this reason the elbow is best secured onto
cooktop manifold before installing unit into
benchtop.
16
Installing the appliance
Remove the pan supports, the burner lid and flame spreader and carefully turn the appliance upside
down and place it on a cushioned mat.
Take care that the Ignition devices and flame supervision devices are not damaged in this operation.
Apply the sponge provided around the edge of the appliance.
Do not leave a gap in the sealing agent or overlap the thickness.
(A) SEALING STRIP
(C) SCREW (B) BRACKET
2.
1.
3.
2.
3.
Do not use a silicon sealant to seal the
appliance against the aperture.
This will make it difficult to remove the
appliance from the aperture in future,
particularly if it needs to be serviced.
Place the bracket (B) over the holes that match the
size of the screws.There are one set of screw holes in
each corner of the hob (H).Slightly tighten a screw (C)
through the bracket (B) so that the bracket is attached
to the hob, but so that you can still adjust the position.
Carefully turn the hob back over and then gently lower
it into the aperture hole that you have cut out.
On the underneath of the hob, adjust the brackets into
a position that is suitable for your worktop.
Then fully tighten the screws (C) to secure the hob into
position.
Gas Connection
This appliance must be installed and connected in accordance with installation
regulations in force in the country in which the appliance is to be used.
This appliance is supplied to run on LPG and natural gas. Conversion for use on LPG
and natural gases must only be undertaken by a qualified person.
Installation of appliance
Note: Wear protective gloves to
fit the hob.
Caution!
Black nut of
manifold
Elbow
Torque:
9±1N.m
lf necessary to adjust or
install the elbow, it is allowed
only torque wrench with
9±1N.m, and work on the
Black nut of manifold instead
of on the elbow.
9.0N.m
esatto.house
17
Gas Connection
Statutory requirements
This installation must conform with the following:
Manufacturer’s Installation instructions
Local Gas Fitting Regulations
Municipal Building Codes
Refer to AS/NZS 5601.1 for Gas Installations
S.A.A. Wiring Code
Local Electrical Regulations
Any other statutory regulations
Preparing to install
Refer to AS/NZS 5601.1 for piping size details. These built-in cooktops are intended to
be inserted in a benchtop cutout. Only an officially authorised technician should
connect the appliance. Before you begin, turn off the gas and electricity supply.
19
A full operational test and a test for possible leakages must be
carried out by the fitter after installation.
Access to the whole length of the connection hose must be possible
and the gas hose must be replaced before its use before the end of
service life (indicated on the hose.)
Before Leaving-Check all connections for gas leaks with soap and
water.
DO NOT use a naked flame for detecting leaks. Ignite all burners both
individually and concurrently to ensure correct operation of gas
valves, burners and ignition. Turn gas taps to low flame position and
observe stability of the flame for each burner individually and all
together. Adhere the duplicate data plate to an accessible location
near the hotplate. When satisfied with the hotplate, please instruct
the user on the correct method of operation. In case the appliance
fails to operate correctly after all checks have been carried out, refer
to the auth orised service provider in your area.
Natural gas connection
95
115
LPG gas connection
pressure test point
pressure test point
Figure 7
REGULATOR
An appliance regulator is provided. The regulator
must be positioned so that the pressure test nipple
is accessible when the appliance is installed.
Connect the gas supply to the ½” B.S.P. internal
thread inlet of the regulator. Refer to ‘bench
cutout’ Figure 5A  5B (relevant to your model) for
connection point position. Regulators are supplied
pre-adjusted and congured by the component
maker for use with Natural Gas.
The appliance installer is not required to
make an adjustment to obtain the correct outlet
pressure setting.
An arrow on the base of the regulator indicates the
direction of gas ow when the inlet and outlet of
the regulator is orientated correctly.
When the regulator has been tted check for leaks
from the connections with soapy water.
ASSEMBLY OF THE REGULATOR
The assembly of the regulator to the cooktop
manifold is achieved via the elbow union and
sealing washer supplied, refer to Figure 7.
The ½” parallel thread connects to the manifold,
and the sealing washer is placed between the
manifold end and the at face on the elbow.
The ½” tapered thread connects to the outlet of
the regulator, and is sealed on the thread using
approved thread sealing tape or approved thread
sealing compound.
The inlet of the regulator is a ½” parallel thread
and is connected to consumer piping or hose
assembly.
Regulators are supplied pre-adjusted and
congured by the component maker for use with
Natural Gas.
The appliance installer is not required to make an
adjustment to obtain the correct outlet
pressure setting.
An arrow on the base of the regulator indicates
the direction of gas ow when the inlet and outlet
of the regulator is orientated correctly. When the
regulator has been tted check for leaks from the
connections with soapy water.
User Manual
18
CHECKING THE GAS SUPPLY
Check the mnometer zero point is correct.
Connect the mnometer to the cooktop
pressure point. This is locted on the regultor.
Turn on the gs supply nd electricity nd try to
ignite the gs.
NOTE:
It will tke dditionl time to light the gs for the
rst time s ir needs to be purged from the pipes.
With the pplince operting check the outlet
pressure:
When ll burners of the pplince re operting
t mximum.
When the smllest burner of the pplince is
operting t minimum.
Under these conditions the outlet pressure should
not vry from the nominl outlet pressure
of 1.00kP by more thn ±0.20kP.
If the regultor ppers to not be performing
stisfctorily, then check the following points:
If the outlet pressure is consistently too low
then the inlet pressure my be too low nd
djustment of n upstrem regultor my be
needed, or n upstrem regultor or vlve with
insucient ow cpcity my be present in
the gs supply line. If this is suspected then it
my be necessry to repet the checks whilst
mesuring both the inlet nd outlet pressure
to determine if the inlet pressure is in the
rnge 1.13 – 5kP.
Check tht the regultor hs been tted to
the gs supply line in the correct orienttion,
the rrow on the bse of the body indictes the
direction of gs ow.
Once these checks hve been completed, if the
regultor still fils to perform in  stisfctory
mnner it should be replced.
Tble 3A – ECGG604W
Burner Type Nturl Gs
(Nominl Test point pressure: 1.00kP)
LPG
(Nominl Test point pressure: 2.75kP)
Injector Size
(mm)
Gs Consumption
(MJ/h)
Injector Size
(mm)
Gs Consumption
(MJ/h)
Auxiliary burner 0.93 4.3 0.58 4.3
Semi Rapid burner 1.15 6.3 0.68 6.3
Rapid burner ————
Wok burner 1.72 13.5 1.0 13.5
Tble 3B – ECGG905W
Burner Type Nturl Gs
(Nominl Test point pressure: 1.00kP)
LPG
(Nominl Test point pressure: 2.75kP)
Injector Size
(mm)
Gs Consumption
(MJ/h)
Injector Size
(mm)
Gs Consumption
(MJ/h)
Auxiliry burner 0.93 4.3 0.58 4.3
Semi Rpid burner 1.15 6.3 0.68 6.3
Rpid burner 1.5 10.8 0.9 10.8
Wok burner 1.72 13.5 1.0 13.5
Gs Connection (Continued)
esatto.house
19
This pplince is supplied set up for Nturl
Gs usge. A conversion kit is included with the
product for Universl LPG usge. The conversion
kit contins the pproprite injectors, 1 Brss Test
Point nd 1 LPG sticker.
Plese follow the procedure below if 
conversion to suit UNIVERSAL LPG is required:
Remove the hotplte trivets, burner cps nd
burner crowns to ccess the hotplte injectors.
Replce the fctory tted injectors with the
pproprite injectors, s supplied. Refer to
injector orice tble for injector sizes. The
injector size is stmped on the side of the
injector.
Connect the brss test point dpter (pictured
opposite) using pproved gs thred tpe or
compound to the elbow tting.
Turn on the gs supply nd t ech new
connection check for leks using sopy wter.
Ech hotplte vlve should be turned on, one
t  time, nd the injector hole blnked o for
severl seconds.
With the pplince operting check the outlet
pressure when ll burners of the pplince
re operting t mximum, when the smllest
burner of the pplince is operting t
minimum.
Under these conditions the outlet pressure
should not vry from the nominl outlet
pressure of 2.60kP by more thn ±0.52kP.
If the regultor ppers to not be performing
stisfctorily then check the following points:
If the outlet pressure is consistently too low
then the inlet pressure my be too low nd
djustment of n upstrem regultor my be
needed, or n upstrem regultor or vlve with
insucient ow cpcity my be present in the
gs supply line.
If this is suspected then it my be necessry to
repet the checks whilst mesuring both the
inlet nd outlet pressure to determine if the
inlet pressure is in the rnge 2.75 – 7.00kP.
One by one, turn the knobs to minimum nd
screw in the bypss screw (ccessible when
the knob is removed) until  smll stble me
results;  length of 3-4mm. Turn the knob to
mximum nd then bck to minimum to ensure
tht the correct minimum me is mintined.
Attch the LPG sticker to the cooker, ner the
gs supply inlet. Cover the Nturl Gs lbel
tht is fctory tted.
LPG Conversion
User Manual
20
Electricl Connection
ELECTRICAL CONNECTION
220240 VOLTS
The pplince is supplied with  stndrd 7.5 Amp
service cord terminted by  3-pin plug for
connection to  stndrd 10 Amp household
socket. The electricl supply is required to power
the electronic ignition system.
Note: It will be necessry for servicing purposes
to disconnect the electricl power supply. The
power point should therefore be ccessible fter
the pplince is instlled, s specied in the locl
wiring regultions.
Digrm 1A  1B (depending on your model)
re schemtics of the wiring in the pplince.
IMPORTANT:
This pplince must be erthed.
This pplince is designed to be connected to 
220-240V, 50Hz-60Hz AC electricity supply.
The wires in the mins led re coloured in
ccordnce with the following code:
1. Green/Yellow = Erth
2. Blue = Neutrl
3. Brown = Live
IMPORTANT: The wire which is coloured
Green/Yellow must be connected to the terminl
which is mrked with the letter E or by the
Erth symbol.
WARNING: When the power cord is dmged it
must be replced by the mnufcturer, its service
gent or similrly qulied persons in order to
void  hzrd.
Digrm 1A ECGG604W
Digrm 1B ECGG905W
Electrical Connection
- Green/yellow = Earth
- Blue = Neutral
- Brown = Live
22
■ This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.
Ŷ7KHZLUHZKLFKLVFRORXUHGJUHHQDQG\HOORZPXVWEHFRQQHFWHG
WRWKHWHUPLQDOZKLFKLVPDUNHGZLWKWKHOHWWHU(RUE\WKHHDUWK
V\PERO
ʄ:,5
When the power cord is damaged it must be replaced by the manufacturer to produce,
customer service agent or similarly qualified personnel.
,1*',$*5$0
Ŷ7KLVDSSOLDQFHPXVWEHHDUWKHG
Ŷ7KHZLUHVLQWKHPDLQVOHDGDUHFRORXUHGLQDFFRUGDQFHZLWKWKHIROORZLQJFRGH
Switch 1
Switch 2
AC INPUT
Switch 3
Switch 4
IGNITION
L
E
N
24
Installation
Electrical Connection
Electrical Connection
- Green/yellow = Earth
- Blue = Neutral
- Brown = Live
22
■ This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.
Ŷ7KHZLUHZKLFKLVFRORXUHGJUHHQDQG\HOORZPXVWEHFRQQHFWHG
WRWKHWHUPLQDOZKLFKLVPDUNHGZLWKWKHOHWWHU(RUE\WKHHDUWK
V\PERO
ʄ:,5
When the power cord is damaged it must be replaced by the manufacturer to produce,
customer service agent or similarly qualified personnel.
,1*',$*5$0
Ŷ7KLVDSSOLDQFHPXVWEHHDUWKHG
Ŷ7KHZLUHVLQWKHPDLQVOHDGDUHFRORXUHGLQDFFRUGDQFHZLWKWKHIROORZLQJFRGH
Switch 1
Switch 2
AC INPUT
Switch 3
Switch 4
IGNITION
L
E
N
Model: ICGG604W Model: ICGG755W & ICGG905W
Wiring Diagrams
Switch 1
Switch 2
AC INPUT
Switch 3
Switch 4
IGNITION
L
E
N
Electrical Connection
- Green/yellow = Earth
- Blue = Neutral
- Brown = Live
22
■ This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.
Ŷ7KHZLUHZKLFKLVFRORXUHGJUHHQDQG\HOORZPXVWEHFRQQHFWHG
WRWKHWHUPLQDOZKLFKLVPDUNHGZLWKWKHOHWWHU(RUE\WKHHDUWK
V\PERO
ʄ:,5
When the power cord is damaged it must be replaced by the manufacturer to produce,
customer service agent or similarly qualified personnel.
,1*',$*5$0
Ŷ7KLVDSSOLDQFHPXVWEHHDUWKHG
Ŷ7KHZLUHVLQWKHPDLQVOHDGDUHFRORXUHGLQDFFRUGDQFHZLWKWKHIROORZLQJFRGH
Switch 1
Switch 2
AC INPUT
Switch 3
Switch 4
IGNITION
L
E
N
Switch 5
Electrical Connection
- Green/yellow = Earth
- Blue = Neutral
- Brown = Live
22
■ This appliance is designed to be connected to a 220-240V, 50Hz-60Hz AC electricity supply.
Ŷ7KHZLUHZKLFKLVFRORXUHGJUHHQDQG\HOORZPXVWEHFRQQHFWHG
WRWKHWHUPLQDOZKLFKLVPDUNHGZLWKWKHOHWWHU(RUE\WKHHDUWK
V\PERO
ʄ:,5
When the power cord is damaged it must be replaced by the manufacturer to produce,
customer service agent or similarly qualified personnel.
,1*',$*5$0
Ŷ7KLVDSSOLDQFHPXVWEHHDUWKHG
Ŷ7KHZLUHVLQWKHPDLQVOHDGDUHFRORXUHGLQDFFRUGDQFHZLWKWKHIROORZLQJFRGH
Switch 1
Switch 2
AC INPUT
Switch 3
Switch 4
IGNITION
L
E
N
Gas adjustment
1
2
Injector
Control handle
Tap
Sealing ring
23
Remove the pan support, Burner lid and Flame spreader.
Unscrew the injector using a 7mm box spanner and
replace it with the stipulated injector for new gas
supply. Carefully reassemble the all components.
After injectors are replaced, it is advisable to strongly
tighten the injector in place.
Adjustment of minimum level of the flame.
Turn the taps down to minimum.
-
Remove the knob from the tap and place a small
bladed screwdriver in the centre of the tap shaft.
The correct adjustment is obtained when the flame
has a length of about 3 - 4 mm.
-
For butane
/ propane gas, the adjusting screw must
Make sure that the flame does not go out by
quickly turning from maximum flow to minimum
flow. If it does then remove the control knob and
make further adjustments to the gas flow, testing it
again once the adjustment has been made.
Repeat this process for each one of the gas taps.
be tightly screwed in.
Refit the control knob.
Ŷ7DNHSUHFDXWLRQVRQWKHRSHUDWLRQVDQGDGMXVWPHQWVWREHFDUULHGRXWZKHQ
FRQYHUWLQJIURPRQHJDVWRDQRWKHU
Ŷ$OOZRUNPXVWEHFDUULHGRXWE\DTXDOL¿HGWHFKQLFLDQ
Ŷ%HIRUH\RXEHJLQWXUQRIIWKHJDVDQGHOHFWULFLW\VXSSO\WRWKHDSSOLDQFH
-
Ŷ
%HIRUHSODFLQJWKHEXUQHUV
EDFNRQWKHWRSSODFHPDNHVXUH
WKDWWKHLQMHFWRULV QRWEORFNHG
FDUULHGRXWDIWHUJDVFRQYHUVLRQ
VXFKDVVRDSZDWHURUJDV
DTXDOL¿HGWHFKQLFLDQRULQVWDOOHU
KDVWRPDUN³9´RQWKHULJKWJDV
FDWHJRU\
WRPDWFKZLWKWKH
VHWWLQJLQUDWLQJSODWH
5HPRYHWKHSUHYLRXV
VHWWLQJ³9´PDUN
LQWKHHYHQWRIDPDOIXQFWLRQ
FKDQJHWKHZKROHWDS
Ŷ
$IXOORSHUDWLRQDOWHVWDQGDWHVW
IRUSRVVLEOHOHDNDJHVPXVWEH
Ŷ
$IWHUFRPSOHWLQJFRQYHUVLRQ
GHWHFWRU
Change the injector of the burners.
ŶDo not dismantle the tap shafe:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Esatto ECGG604W User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI