Sunnydaze Decor LZH-087 Owner's manual

Brand: Sunnydaze Decor

Model: LZH-087

Type: Owner's manual

Sunnydaze Decor LZH-087 is a 3-tier cornucopia outdoor water fountain, designed to bring a touch of elegance and tranquility to your outdoor living space. Its captivating design features cascading water flowing from the decorative topper through each tier, creating a soothing and mesmerizing ambiance.

With its durable construction and easy-to-assemble components, this fountain is built to withstand the elements and provide years of enjoyment. The electric submersible pump ensures a continuous water flow, which can be adjusted to your desired level using the switch on the pump.

The fountain's compact design makes it suitable for various outdoor settings, such as patios, balconies, or gardens. Its versatility allows you to place it on any smooth and level surface, adding a touch of charm and sophistication to your surroundings.

3-TIER CORNUCOPIA

OUTDOOR WATER FOUNTAIN

LZH-087

Read all assembly and care instructions carefully before using this product.

Save this manual for future reference.

Select a smooth, level surface to place the fountain.



  

APedestal 1

BLarge Tier 1

CElectric Submersible Pump 1

DPump Cover 1

ELarge Column 1

FMedium Tier 1

GSmall Column 1

HSmall Tier 1

IDecorative Topper 1

1. Align the tabs on the bottom of Large Tier (B) with the notches on top of Pedestal (A), twist clockwise to

lock in place.

2. Feed the Electric Submersible Pump (C) power cord through the tube in Large Tier (B). Rest Pump (C) on

the bottom of Large Tier (B). Pull the power cord out through the groove on the back-side of Pedestal (A).

3. Align the notches in Large Column (E) with the tabs on Large Tier (B) and twist the column clockwise to

lock in place.

((22))

((33))

((11))

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Purchase Date: / / Order/Customer Reference Number:

12/2022MQ039A.B.C Page 1 / 3

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

NOTE: The water tubing is built into the

topper. Gently and carefully uncoil the water

tube from the inside of the topper. Take care

when handling the water tube; detaching

the water tube from the fountain will damage

the fountain and void the product warranty.

ASSEMBLY

TIP: Familiarize yourself with the pump. Water ow is controlled by a switch

on the front of the pump. Moving the switch to (+) increases water ow, (-)

decreases water ow.

4. Route the water tube that is built into Decorative Topper (I) through Small Tier (H). Align the notches in

Decorative Topper (I) with the tabs on Small Tier (H) and twist the topper clockwise to lock in place.

5. Route the water tube from the assembled top section (I and H) through Small Column (G). Align the tabs of

Small Tier (H) with the notches in Small Column (G) and twist the column clockwise to lock in place.

6. Route the water tube from the assembled top pieces (I, H and G) through Medium Tier (F). Align the tabs of

Small Column (G) with the notches in Medium Tier (F) and twist the medium tier clockwise to lock in place.

((55))

((77))

((99))

((88))

((66))

((1111))

((1010))

12/2022MQ039A.B.C Page2 / 3

NOTE: When rst used, there may be air trapped in the pump. It may take several minutes for trapped air to escape, allowing water to ow.

You may need to add more water after the pump begins to circulate water through the fountain.

7. Route the water tube from the assembled top pieces (I, H, G and F) into assembled Large Column (E). Align

the tabs of Medium Tier (F) with the notches in Large Column (E) and twist clockwise to lock in place.

8. Through the opening of Large Column (E), connect the water tube to the hose adapter of Pump (C); make

sure the connection is tight.

9. Place Pump Cover (D) onto the opening of Large Column (E).

10. Fill the fountain tiers with enough clean water to ensure the pump will remain submerged during operation,

approximately 5 gallons.

11. Plug the power cord into a properly grounded GFCI outlet. Ensure the cord has a 'drip loop' to prevent

water from dripping along the cord and into the outlet.

((44))

12/2022MQ039A.B.C Page 3 / 3

• Ensure the pump is fully submerged under the water.

• If water is not flowing within several moments of the power cord being plugged in, the pump may have air bubbles

trapped in it, which can prevent water from circulating properly and/or may cause excess pump noise. Simply unplug

the power supply for a few moments and plug it back in.

• If water is still not flowing, inspect the pump and tubing for obstructions.

• Check the flow control on the body of the pump, it may need to be adjusted to achieve the desired water flow rate.

• Pump noise can be caused by trapped air, low water level, or the pump being too close to the sides of the fountain.

Check the pump. Try moving the pump and/or adding water to help reduce pump noise.

• Soft surfaces may cause the fountain to become unbalanced. A large stepping stone or paving stone (not included) is

recommended to help ensure the fountain remains evenly balanced.

• Check to make sure the power outlet is working; consult a certified electrician if in doubt about electrical connections.

Troubleshooting



IMPORTANT SAFETY INFORMATION

• For outdoor use only.

• Keep fountain out of reach of children and pets.

• Make sure the power cord is away from traffic areas.

• Keep power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.

• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn

out the motor.

• Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.

• Always empty and store the fountain and pump indoors during freezing weather.

• For outdoor use only. Some splashing is normal; adjust the flow rate on the pump to reach desired flow rate.

• Some climates and weather conditions increase water evaporation which require additional water to be added more

frequently. Regularly check water levels during high temperatures, windy conditions, and after long-term exposure to

direct sunlight to ensure the pump does not run dry. Never allow the pump to run dry as it will burn out the motor.

• Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required. Tap water is okay

to use, but avoid heavily chlorinated water as it may damage the fountain and the pump.

• Periodically change the water to keep the water, fountain, and pump clean. Remove scale and buildup regularly.

NEVER use harmful additives such as bleach, chlorine, etc.

NEVER use anything that is abrasive to scrub the fountain.

NEVER use a pressure washer or high-pressure sprayer/nozzle to ll or clean the fountain.

• Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump. Take care

when handling the pump; only pick it up by the body of the pump, never the power cord.

• During freezing weather, drain the fountain, disconnect the pump and store indoors; allowing ice to form may damage

the fountain in such ways as, but not limited to, fountain cracking and/or permanent pump damage.

• Over time, the finish may gradually mellow in color due to sun exposure; this is part of the natural aging process and

is not cause for return.

Care & Maintenance

If you continue to experience problems, have issues with assembly, or the product was damaged during shipping,

please contact our customer service team directly via one of the methods mentioned at the top of page 1.

Please have the item number and order information ready to expedite response time.

WARNING:



indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.

Sunnydaze Decor LZH-087 Owner's manual

Sunnydaze Decor LZH-087 Owner's manual

Sunnydaze Decor LZH-087 Owner's manual

Related papers

Other documents