Smart-AVI XT-TX400 User manual

XT-TX400
Smart-AVI
Brand
Smart-AVI
Model
XT-TX400
Category
AV extenders
Type
User manual

Smart-AVI XT-TX400 is a high-performance CAT5 extender that distributes SXGA video, stereo audio, RS232, and IR signals to up to 4 remote locations, each up to 1000 feet away. Ideal for a variety of applications, including digital signage, home theater, and video conferencing, it supports resolutions up to 1920 x 1200 and provides reliable, crystal-clear signal transmission over a single CAT5 cable.

Smart-AVI XT-TX400 is a high-performance CAT5 extender that distributes SXGA video, stereo audio, RS232, and IR signals to up to 4 remote locations, each up to 1000 feet away. Ideal for a variety of applications, including digital signage, home theater, and video conferencing, it supports resolutions up to 1920 x 1200 and provides reliable, crystal-clear signal transmission over a single CAT5 cable.

XT‐400
Quick Start Guide
800.AVI.2131
Tel: (818) 503-6200 | Fax: (818) 503-6208
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Designed and Manufactured in the USA
PART NO. QTY DESCRIPTION
XT-TX400S 1
UXGA/Audio/IR/RS-232 point-
to multi-point CAT5 Extender, 4
-Port Transmitter.
PS5VDC2A
1
Power Adapter
1 Quick Start Guide
WHAT’S IN THE BOX
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
20161213
Use a single CAT5 cable to
broadcast high resolution SXGA,
stereo audio, RS232 and IR to 4
stations up to 1,000 feet away
VGA Distribution System Using CAT5
Unshielded Twisted Pair Cabling
TECHNICAL SPECIFICATIONS
VIDEO
Format
RGBHV, RGsB, YUV, Y/C, CVBS
Resolution
Up to 1920 x 1200, VGA,
SVGA, XGA, SXGA
Input Connector Type
(1) HD 15 socket female
Output Connector Type
(1) HD 15 socket female
AUDIO
Signal Type
Stereo unbalanced
Input Interface
(1) Connector 3.5mm jack
socket
Output Interface
(1) Connector 3.5mm jack
socket
IR
Input Interface (TX) (1) 3.5 mm (Female)
Output Interface (RX)
(1) 3.5 mm (Female)
IR Frequency Range
30KHz to 80KHz
Emitter Distance
Up to 10’
Connector
3.5mm Stereo jack for emitter
and IR eye
OTHER
RS-232
(1) DB9 Female, 9600 bps, N,
8 1, No flow control
Power 5VDC2A
Weight .75 lbs.
Dimensions 1.25”H x 4.75D x 9”W
RECEIVERS SUPPORTED
XTPro-RX, XTAV-RX, XTWALL-RX, XTPro XTREEM-RX
OPTIONALLY AVAILABLE
PART NO. QTY DESCRIPTION
CC-MMAMM-06 1
Audio 3.5 mm stereo
miniplug cable
SM-EYE
1
IR EYE Receiver
SM-LED 1 IR Emitter
CCRS232-06 1 6' RS232 cable
INTRODUCTION
The XT-400 range of products allows the extension of
a wide range of video and audio formats, RS-232 and
IR to up to 4 locations using Category 5 Unshielded
Twisted Pair (UTP) cables.
With RS232 communication support the XT400
allows users to send commands to single or
multiples devices. This allows the user to change
volume, channel or turn on/off the remote LCD TV.
CONNECTING THE XT-400 TRANSMITTER
1. Connect the output of the computer video card to the video input of the transmitter using the included male to male video
cable.
2. Optionally connect the output of the computer audio card to the audio input of the transmitter using 3.5mm audio male to
male audio cable.
3. Connect local monitor to the VGA out of the transmitter.
4. Optionally connect external speakers to the transmitter’s audio out (Standard 3.5mm stereo miniplug).
5. Connect CAT5 cables to outputs 1-4.
*NOTE: You can not use RS232 and IR at the same time.
CONNECTING THE RECEIVER
1. Connect CAT5 cable (coming from the transmitter) to the back of the receiver.
2. Connect 1-4 display monitors to the VGA out connectors on the receiver.
3. Optionally connect 1-4 sets of external speakers to the audio connectors on the receiver. (Standard 3.5mm stereo Miniplug)
Sending an RS232 command to a remote monitor
In order to send a command to a remote monitor, you need to use the following query at 9600 baud rate, N,8,1, No flow control.
//M01<CR>
After sending this query, any command sent from the PC will go directly to output 1
To send a command to output 2 replace "M01" with "M02" etc…
To send the same command to all outputs ( but only output 1 will answer) Use the following command;
//M00<CR>
*<CR> = Carriage return
CONNECTING THE XT-400 TO AN
OPTIONAL RECEIVER (XTAV-RX)
CONNECTING THE XT-400 TO AN
OPTIONAL RECEIVER (XTPRO-RX)
  • Page 1 1
  • Page 2 2

Smart-AVI XT-TX400 User manual

XT-TX400
Smart-AVI
Brand
Smart-AVI
Model
XT-TX400
Category
AV extenders
Type
User manual

Smart-AVI XT-TX400 is a high-performance CAT5 extender that distributes SXGA video, stereo audio, RS232, and IR signals to up to 4 remote locations, each up to 1000 feet away. Ideal for a variety of applications, including digital signage, home theater, and video conferencing, it supports resolutions up to 1920 x 1200 and provides reliable, crystal-clear signal transmission over a single CAT5 cable.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents