Eastwood 6 in Bench Vise Operating instructions

Brand
Eastwood
Model
6 in Bench Vise
Type
Operating instructions

This manual is also suitable for

Eastwood 6 in Bench Vise is a high-quality tool built to serve the demands of avid hobbyists and seasoned professionals alike. Its 6-inch jaw width and 6-inch maximum jaw opening make it suitable for clamping various workpieces securely. The vise can be mounted on a solid metal or wood surface, ensuring stability during use.

The Eastwood 6 in Bench Vise features a swivel base that allows for easy positioning. Its durable construction ensures long-lasting performance, and the smooth operation of the handle provides precise control over the clamping force.

Eastwood 6 in Bench Vise is a high-quality tool built to serve the demands of avid hobbyists and seasoned professionals alike. Its 6-inch jaw width and 6-inch maximum jaw opening make it suitable for clamping various workpieces securely. The vise can be mounted on a solid metal or wood surface, ensuring stability during use.

The Eastwood 6 in Bench Vise features a swivel base that allows for easy positioning. Its durable construction ensures long-lasting performance, and the smooth operation of the handle provides precise control over the clamping force.

Item #30534Q
BENCH VISE
MOUNTING & OPERATING INSTRUCTIONS
Eastwood Item Numbers 30114 & 30115
2 Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
READ INSTRUCTIONS!
Thoroughly read and understand manual before mounting or operating the bench vise.
Save for future reference.
SAFETY INFORMATION
OPERATIONAL HAZARDS!
• Wear approved eye gear while installing and operating vise.
• Keep hands and body parts away from the clamping surfaces while in use to
avoid pinching.
ELECTRICAL HAZARDS!
• When mounting vise, inspect backside of mounting surface for electric power
lines before drilling.
WARNINGS!
• Use for intended purpose only! A vise is designed to clamp pieces and is not
designed to be a press.
• Do not over tighten the vise handle or install a pipe on the handle to increase its
leverage. Doing so will break the vise and will not be covered under warranty.
The Eastwood Bench Vise is built to high quality standards to provide long life and smooth operation
to serve the demands of the avid hobbyist and seasoned professional alike.
SPECIFICATIONS
6" Vise
• 6" Jaw Width
• 6” Maximum Jaw Opening
8" Vise
• 8" Jaw Width
• 8" Maximum Jaw Opening
To order parts and supplies: 800.345.1178 >> eastwood.com 3
MOUNTING INSTRUCTIONS
1. This Bench Vise is designed to be bolted to a solid metal or wood surface.
2. Position the Bench Vise onto the surface it will be mounted to in the preferred orientation.
3. Mark the center of each of the holes in the base on the mounting surface.
4. Move the Vise aside and drill through the surface at each of the points.
5. Position the vise back over the holes.
6. Install High Grade Bolts with washers (not included) that are the proper length to go through
the base of the Vise and the mounting surface.
7. Install fl at washers and nuts onto the bolt on the bottom side of the mounting surface and
tighten securely.
OPERATING INSTRUCTIONS
1. Loosen the handles on the base to swivel the vise to the desired position.
2. Retighten the base handles once set.
3. Turn the Handle of the Vise counterclockwise to open the Vise jaws.
4. Insert the work piece between the jaws.
5. Tighten the Jaws by rotating the Handle clockwise until the piece is clamped fi rmly.
© Copyright 2014 Easthill Group, Inc. Instruction part #30534Q Rev. 8/14
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com
PDF version of this manual is available online >> eastwood.com/30534manual
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
US and Canada: 800.345.1178 Outside US: 610.718.8335 Fax: 610.323.6268 eastwood.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Eastwood 6 in Bench Vise Operating instructions

Brand
Eastwood
Model
6 in Bench Vise
Type
Operating instructions
This manual is also suitable for

Eastwood 6 in Bench Vise is a high-quality tool built to serve the demands of avid hobbyists and seasoned professionals alike. Its 6-inch jaw width and 6-inch maximum jaw opening make it suitable for clamping various workpieces securely. The vise can be mounted on a solid metal or wood surface, ensuring stability during use.

The Eastwood 6 in Bench Vise features a swivel base that allows for easy positioning. Its durable construction ensures long-lasting performance, and the smooth operation of the handle provides precise control over the clamping force.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents