Instruction Manual
and International Warranty
1
English
TABLE OF CONTENTS
EDOX VISION AND MILESTONES 2
1. INTRODUCTION 4
1.1 EDOX INTERNATIONAL WARRANTY 4
1.2 SPECIAL RECOMMENDATIONS 4
1.3 MAINTENANCE RECOMMENDATIONS 4
1.4 SERVICING 5
1.5 ENVIRONMENTAL PROTECTION 5
2. PRECISION TOLERANCES 5
2.1 MECHANICAL WATCHES ACCURACY 5
2.2 CHRONOMETER WATCHES ACCURACY 5
3. GENERAL INFORMATION 5
3.1 HELIUM ESCAPE VALVE 5
3.2 TACHYMETER SCALE 5
3.3 WATER RESISTANCE 6
3.4 LEATHER STRAPS 6
3.5 SCREW-DOWN CROWN 6
3.6 PVD COATING 6
3.7 TITANIUM 6
3.8 STAINLESS STEEL 6
4. OPERATING INSTRUCTIONS 6
4.1 SELF WINDING (AUTOMATIC) CHRONOGRAPH 7
4.2 SELF WINDING (AUTOMATIC) WATCHES 7
4.3 HAND WINDING WATCHES 8
4.4 QUARTZ CHRONOGRAPH 9
4.5 QUARTZ WATCHES 10
4.6 CHRONORALLY MOVEMENT 12
4.7 INSTRUCTION ON HOW TO SHORTEN A RUBBER STRAP 14
Edox 011 7
Edox 012 7
Edox 45 7
Edox 91 7
Edox 95 7
Edox 37 7
Edox 77 7
Edox 80 7
Edox 82 7
Edox 83 7
Edox 89 7
Edox 94 7
Edox 96 7
Edox 47 7
Edox 85 7
Edox 87 7
Edox 90 8
Edox 93 8
Edox 72 8
Edox 92 8
Edox 013 9
Edox 019 9
Edox 103 9
Edox 015 9
Edox 10 10
Edox 104 10
Edox 21 10
Edox 28 10
Edox 64 10
Edox 23 10
Edox 26 11
Edox 27 11
Edox 34 11
Edox 48 11
Edox 60 11
Edox 63 11
Edox 70 11
Edox 86 11
Edox 62 11
Edox 84 12
Edox 36 12
Movement
The first 2 or 3 digits of the reference
represent the Edox movement code.
3
7
0
1
6
8
/
0
1
1
0
5
3
7
0
1
6
8
/
0
1
1
0
5
Movement number
2
EDOX VISION AND MILESTONES
1884
One year earlier, a very romantic Christian
Ruefli-Flury, a highly talented watchmaker
“Maître-Horloger” from Grenchen in
Switzerland, builds a pocket watch for the
25th birthday of his beloved wife Pauline.
Impressed by the accomplishment of her
gift, she convinces then her husband to
set up his own watch making company in
Biel in 1884, a famous city for its well-
educated watch engineers. Christian
Ruefli-Flury calls his company “Edox”
which means “the hour” in ancient Greek.
1900
The hourglass is officially used as a time-
less symbol for Edox and is since a proud
heritage part of the early years of the
company.
1921
After the death of the founder, the com-
pany is taken over by Robert Kaufmann-
Hug, a wise businessman. He quickly
makes decisions which change Edox des-
tiny in propelling the company as the first
watch making facility producing wrist
timepieces only.
1955
After World War 2, demand for Edox time-
pieces continues to grow. Edox employs at
that time up to 500 watchmakers. The
company moves into new, larger and
modern production facilities. The high-
tech machines allow the production of
highly water-resistant timepieces.
1961
It is the year of birth of the famous “Delfin”
timepiece. This Edox invention features for
the first time of the watch industry a dou-
ble case back, sturdy protective gaskets
and seals that set new standards of shock
protection and water resistance.
1963
The Edox “Hydrosub” timepiece is
launched featuring the first crown system
with tension ring and shock-absorbing
gasket allowing a waterproofness of
500 meters. The “Hydrosub” timepiece is
still nowadays well known for its avant-
guardiste technical achievement.
1970
The early 70’s witnesses the introduction
of the world’s first truly universal time
watch, the Edox “Geoscope” timepiece.
Covering all time zones, the watch pro-
vides the hour of almost 50 different cities
around the world as well as the wearer’s
local time.
1983
After a worldwide financial recession, the
company is taken over and is since a
family-owned independent company. The
decision is made to move the facilities to
Les Genevez in the heart of the Swiss
Jura, the homeland of many famous
highly skilled watchmakers.
1998
Edox engineers and watchmakers develop
a superb invention: the world’s slimmest
watch with calendar, the “Les Bémonts
Ultra Slim” collection. The movement has
a height of only 1,4 mm. This technical
record is held unbroken by Edox since
then.
3
2005
Birth year of the famous and highly com-
plicated “Les Bémonts – Maître Horloger
– 5 Minute Repeater” timepiece. This me-
chanical watch is able to tell the time by
its bell mechanism. The timepiece carries
one of the ultimate complications of the
watch industry, the Dubois Dépraz move-
ment.
2006
Edox signs an agreement with IOTA (World
Powerboat Association) and becomes the
official timekeeper of the Class-1 World
Powerboat Championship, the Formula 1
of the seas. Edox also develops new in-
struments based on satellite and GPS
technology for water sport timing.
2007
Geneva March 8, 2007. During the Salon
d’automobile de Genève, the Swedish su-
per sports car manufacturer Koenigsegg
and Edox proudly announce a new excit-
ing partnership.
Both companies share the same passion
for fine mechanism, the same combina-
tion of prestige and performance and the
same heritage of excellence.
BaselWorld April 2007. Official launch of
the new “Classe-Royale 5 Minute
Repeater” timepiece featuring the hand-
assembled complication movement
Dubois Dépraz.
2008
Edox is the official timekeeper of the
Class-1 World Powerboat Championship.
The Swiss brand is the first watch manu-
facturer timing partner of high class off-
shore races. The Class-1 timepiece
collection is a true statement of the per-
formance and a technical rendering of
both philosophies. A special Class-1
Limited Edition is produced to 500 pieces
worldwide.
2009
Edox is engaged in a new thrilling adven-
ture and signs a timing partnership with
the majestic sailing boat Sea Dubai. This
vessel is engaged in the RC44 champion-
ship on numerous international seas and
belongs to the very active and enthusias-
tic Dubai International Marine Club
(DIMC). Edox also signs up for another
year of timekeeping the extremely impres-
sive Class-1 World Powerboat
Championship.
2010
Edox is still the official timekeeper of the
Class-1 World Powerboat Championship
and the official timing partner of the RC
44 sailing boat Sea Dubai.
Extending its brand awareness on the
WRC races worldwide, Edox has signed a
partnership contract with free diver
Christian Redl, multiple record holder of
extreme free dives under the ice.
4
1. INTRODUCTION
1.1 International Edox Warranty
Congratulations on having chosen an Edox
timepiece. To ensure your timepiece oper-
ates perfectly, we recommend that you
follow the advice given in these instruc-
tions (All instruction manuals are also
available on our website www.edox.ch).
The warranty of your Edox watch is valid
for a period of 24 months effective from
the date of purchase and under the terms
and conditions of the present warranty.
The international Edox warranty covers
material and manufacturing defects exist-
ing at the time of delivery of the pur-
chased Edox watch. The warranty only
comes into force if the warranty certificate
is dated, fully and correctly completed and
stamped by an official Edox retailer.
During the warranty period and by pre-
senting the valid warranty certificate, you
will have the right to have any defect re-
paired free of charge. In the event that
repairs are unable to restore the normal
conditions of use of your Edox watch,
Montres Edox & Vista SA guarantees its
replacement by an Edox watch of identical
or similar characteristics.
The warranty for the replacement watch
ends 24 months after the date of pur-
chase of the replaced watch.
The manufacturer’s warranty does not
cover:
•Thebattery
•Theglass
•Theleatherstrap
•Normalwear,andtearandageing(for
example scratched crystal, alteration of
the colour and/or material of non
metallic straps and chains, such as
leather, rubber).
•Anydamageonanypartofthewatch
resulting from abnormal/abusive use,
lack of care, negligence, accidents
(knocks dents, crushing, broken crystal,
etc.), incorrect use of the watch and
non-observance of the operating
instructions provided by Edox.
•TheEdoxwatchhandledby
non-authorized persons (for example
for battery replacement, service or
repair) or which has been altered in its
original condition beyond Edox’ control.
•Edoxwatchesboughtfromnon
authorized retailers since Edox is not
able to check if the watches were
handled and stocked correctly.
Any further claim against Montres Edox &
Vista SA, for example for damages addi-
tional to the above described warranty is
expressly excluded, except mandatory
statutory rights the purchaser may have
against the manufacturer.
The above manufacturer’s warranty:
•Isindependentofanywarrantythat
may be provided by the seller, for
which he carries sole responsibility;
•Doesneitheraffectthepurchaser’s
rights against the seller nor any other
mandatory statutory rights the
purchaser may have against the seller.
•ALLAPPLICABLEIMPLIED
WARRANTIES,INCLUDINGTHE
IMPLIEDWARRANTYOF
MERCHANTABILITYANDOFFITNESS
FORAPARTICULARPURPOSEGIVEN
TOYOUBYLAWAREHEREBYLIMITED
INDURATIONTOTHEDURATIONOF
THISWARRANTY.UNDERNO
CIRCUMSTANCESWILLEdox&Vista
SABELIABLEFORANYINDIRECTOR
CONSEQUENTIALDAMAGESOFANY
KIND.
If your watch needs attention, rely on an
official Edox dealer: he can guarantee ser-
vice according to Edox’ standards.
1.2 Special recommendations
To avoid any errors, do not perform the
date setting between 22h00 and 3h00
when the date mechanism is in action. Be
careful not to confuse noon and midnight.
Never operate pushers or crown when
your timepiece is under water or if it is wet
and ensure that the crown and pushers
are properly pushed back or screwed
down after each use.
We recommend that you have the water
resistance of your timepiece checked at
an authorized Edox center every
24 months or whenever the timepiece
case is opened.
1.3 Maintenance recommendations
Magnetic fields: avoid placing your
watch on loudspeakers, or refrigerators,
since they generate powerful magnetic
fields.
Chemical products: avoid direct contact
with solvents, detergents, perfumes, cos-
metics etc., since they may damage the
bracelet, case or gaskets.
Cleaning: for metal bracelets and water-
resistant cases, use a toothbrush with
soapy water to clean and a soft cloth for
drying.
Shocks: avoid thermal and violent
shocks.
5
1.4 What are the service intervals?
Every 24 months
we advise you to do maintenance service
(water resistance, movement accuracy
test).
Every 5 years
we advise you to do a complete mainte-
nance service (complete movement revi-
sion, water resistance, accuracy and
functionality complete revision).
Who should I contact for a
maintenance service or battery
replacement?
We recommend that you contact an au-
thorized Edox retailer, as they are the only
certified specialists equipped with the
tools and apparatus required carrying out
the work and the necessary checks in a
professional manner. Furthermore, only
these certified specialists can guarantee
that their work is carried out in accord-
ance with Edox’ strict quality standards.
Make sure that right after each battery
change the watch has been water-re-
sistant tested.
1.5 Environmental protection
Collection and treatment of end of life
Quartzwatches*
This product should not be disposed of
with household waste. It has to be re-
turned to a local authorized collection
system. By following this procedure you
will contribute to the protection of the en-
vironment and human health. The recy-
cling of the materials will help to conserve
natural resources.
*valid in EU member states and in any
countries with corresponding legislation.
2. PRECISION TOLERANCES
Mechanical watches
The mechanical Edox watch with an auto-
matic movement does not need to be
wound by hand.
The motion of your wrist makes the rotor
(oscillating weight or mass) turn, thereby
winding up the mainspring of the watch
movement.
The everyday activity of life is sufficient in
itself to wind up an automatic Edox watch
and it will run continually, even if it is re-
moved at night. However, if not worn for
approximately 40 hours, it will stop. To
make the watch work again, turn the
crownclockwiseabout20times.Nowset
the time and if possible the date, etc.
2.1 Mechanical watches accuracy
Depending on the movement, the daily
tolerance of a mechanical watch can be of
30 seconds. If you notice a bigger toler-
ance rate, you can have your watch ad-
justed at a service center in your country,
free of charge within the guarantee peri-
od.
2.2 Chronometer watches accuracy
Every Edox Chronometer comes with a
rating certificate issued after an official
test by the Swiss Official Chronometer
Testing Institute (COSC). The accuracy of
the watch movement is tested electroni-
cally at the COSC during 15 days in differ-
ent positions and at different
temperatures. The average daily rating
must not exceed -4/+6 seconds per day.
Only Edox watches which have success-
fully undergone the official COSC rating
procedure qualify as chronometers.
3. GENERAL INFORMATIONS
3.1 Helium escape valve
Decompression system which allows he-
lium to escape from inside the watch
when the watch is worn for professional
use in pressure chambers. (Long-term
underwater work, crude oil exploration,
etc.)
Important: The Edox helium valve opens
and closes automatically (for the models
wearing the new automatic Helium es-
cape valve). The models wearing a non-
automatic Helium escape valve must have
the valve screw down in order to guaran-
tee the water resistance of the watch.
Unscrew the Helium escape valve only to
release the gas from the watch. Do not
unscrew it under water in order to prevent
water entering the mechanism.
3.2 Tachymeter scale
Some Edox Chronograph watches have a
tachymeter scale. With this scale it is pos-
sible to measure the speed. The distance
is 1 km. To measure the elapsed time
press the start/stop button when the vehi-
cle (power-boat) passes the starting and
the final point or target. The figure shown
by the hand on the tachymeter scale indi-
cates the average speed in kilometers. If
for instance a car covers a 1 km distance
in 30 seconds, you can consider it to an
average speed of 120 km per hour.
6
3
7
0
1
6
8
/
0
1
1
0
5
Reference number
Serial number
Movement
number
3.3 Water resistance
All Edox timepieces are water-resistant
from 30 to 1500 meters. Check the de-
tails on the back of your Edox timepiece
and read the following instruction care-
fully.
Meters Feet ATM
30 100 3
50 165 5
100 330 10
200 650 20
300 990 30
500 1650 50
1000 3000 100
1500 4900 150
The water resistance of your timepiece
cannot be guaranteed indefinitely, consid-
ering that joints may age, crowns or push-
ers may sustain knocks and climate or
temperature may vary. We therefore rec-
ommend that you have the water resist-
ance of your timepiece checked every
2 years or whenever the timepiece case is
opened.
3.4 Leather straps
Original Edox leather straps are clearly
marked on the buckle and on the reverse
side. Edox uses a large variety of calfskin
leather straps with imprinted patterns of
different animals. Leather straps should
not be used by individuals with strong per-
spiration or by those who stay for long
periods in a humid climate. Leather straps
are not covered by the international Edox
warranty.
3.5 Screw-down crown
Screw down the crown carefully to pre-
vent water from penetrating the mecha-
nism.
3.6 PVD (Physical Vapour
Deposition)
The advantage of PVD is that it is a thin
but hard layer, resistant to corrosion, has
a strong adherence, offers many choices
of colours and is hypoallergenic.
3.7 Titanium
The titanium is a light metal of a metallic
white aspect. Lighter than the steel, it
possesses the main characteristics: cor-
rosion resistance, dilation, etc. Its proper-
ties make titanium a material
determinedly adapted to the modern tech-
nologies and intended for fields of appli-
cation such as the aeronautics, the
automobile, the surgery, the electronics.
3.8 Stainless steel 316L
The stainless steel used for Edox cases
and bracelets appears among the best al-
loys at the moment (316L. It is obtained
by a special cast iron which guarantees
an extreme robustness and excellent anti-
magnetic properties. Its low content in
carbon makes it particularly resistant to
the corrosion.
4. OPERATING INSTRUCTIONS, HOW
TO USE YOUR MANUAL:
The operating instructions are related to
the reference of the movement (calibre) in
your watch. Please check first of all which
movementisinyourwatch.Youareable
to find the reference on the case back of
your watch.
Movement
The first 2 or 3 digits of the reference rep-
resent the Edox movement code.
Find the reference in the following pages.
7
4.1 Self winding (automatic)
chronograph
Edox 011, 012, 45, 91, 95
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding: if the watch has
not been worn for more than 40 hours or
more, wind it up with the crown in posi-
tion 1.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
(backwards for references 45), then push
the crown back to position 1.
Correcting the day for the references
011: pull the crown out to position 2, turn
the crown backwards, then push the
crown to position 1. Push the crown back
in.
NB:Forallreferences:donotcorrectthe
date between 22h00 and 02h00.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Pusher B: reset (after a stop)
4.2 Self winding (automatic)
watches
Edox 37, 77, 80, 82, 83, 89, 94, 96
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding: if the watch has
not been worn for more than 42 hours or
more, wind it up with the crown in posi-
tion 1.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards (forwards for references 83) and
push it back to position 1.
Correcting the day for the references
83: pull the crown out to position 2, turn
the crown backwards, then push the
crown to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
Power reserve: for references 94: The
small hand places in the counter at 6
o’clock indicates the power reserve. If the
automatic mechanical watch is not worn,
the power reserve lasts for approximate
42 hours. The power reserve can be in-
creased by winding up the crown manu-
ally in position 1 or while wearing the
watch on the wrist by the rotation of the
oscillation mass.
Edox 47, 85
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding: if the watch has
not been worn for more than 42 hours or
more, wind it up with the crown in posi-
tion 1.
2. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
Edox 87
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding: if the watch has
not been worn for more than 42 hours or
more, wind it up with the crown in posi-
tion 1.
2. Time setting: hours and minutes. Pull
the crown out to position 2. Turn the
crown forwards or backwards. Push the
crown back to position 1.
Hand-operating repeater: by pushing
the pusher-button, you start the 5 minutes
repeater mechanism: the first series of
blows strikes the hours (one ring) – the
second series of blows strikes every five
minutes (two rings). For example:
11:43 minutes: first 11 single rings – the
8
hours – the 8 double rings – the minutes
as 8 x 5 = 40 minutes.
Attention: let the mechanism ring en-
tirely before activating it again in order to
prevent damages. Do not set the time
when the ring is activated. Edox declines
all responsibilities of misuse.
Edox 90
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding: if the watch has not
been worn for more than 42 hours or more,
wind it up with the crown in position 1.
2. Time setting: hours and minutes. Pull
the crown out to position 2. Turn the
crown forwards or backwards. Push the
crown back to position 1.
Moon phase adjustment: press the
push-button C until the full moon appears
in the centre of the moon aperture.
Determine the date of the last full moon by
using a calendar. Press the push-button C
as often as the number of days which
have passed since the last full moon.
Date setting (31 days): press the push-
button D until the centre hand points the
desired day.
Month setting (12 months): press the
push-button A until the desired month is
reached.
Day of the week (7 days): press the
push-button B to set the day of the week.
Attention: do not make setting between
22h00 and 02h00 and do not alter the
moon phase between 15h00 and 17h00,
to prevent damage to the watch mecha-
nism.
Edox 93
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
Occasional winding: if the watch has
not been worn for more than 42 hours or
more, wind it up with the crown in posi-
tion 1.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
Correcting the 24 hours hand (GMT):
pull the crown out to position 2, turn the
crown forwards, only the hour hand
moves without affecting the precision ot
the minutes or seconds. If the hand moves
past midnight, the date changes auto-
matically. Push the crown back to posi-
tion 1. This hand shows at a glance a
second time zone on a 24 h scale.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to po-
sition 1 to coincide with a given time signal.
4.3 Hand winding watches
Edox 72
Watch functions:
The crown has 2 positions:
1. Normal position (wearing position):
when the crown is positioned against the
case, the crown ensures that the watch is
water-resistant.
2. Time setting: hours and minutes. Pull
the crown out to position 2. Turn the
crown forwards or backwards. Push the
crown back to position 1.
NB:thesewatchesshouldbewounddaily,
preferably in the morning. To do this, turn
the crown forward until you feel resist-
ance. After this operation, the watch will
work approximately 35 hours after being
fully wound up.
Edox 92
Venus movement
The hand setting is effected in the same
manner as for any other watch. That is to
say by pulling the winding crown and then
turning same to the right or to the left.
The date, from the 1st to the 31st is
indicated by the date hand. Every
pressure effected on the push-button
No.A(opp.4o’clock) advancesdate by
one day. If the preceeding month was
shorter than 31 days, the date is also to
be advanced by means of the push-
button.
The months which appear in the window
on the right are adjusted by push-button
No.B(opp.2o’clock).Everypressureon
the push-button advances the disc one
month ahead.
The days of the week, from Monday to
Sunday which appear in the window on
theleftareadjustedbypushbuttonNo.D
(opp. 10 0’clock)
The moon phases can be adjusted by
pressingrmlypush-buttonNo.1(opp.4
o’clock). The latter has two functions. A
slight pressure advances date hand, a
stronger pressure advances the moon
disc one day ahead.
9
If your watch has not been used for sev-
eral days, turn the hands until the days
and dates change. At this moment your
watch is set shortly after midnight. It will
then be necessary to still advance the
hands till 6 o’clock. Then you can adjust
the calendar by proceeding in the follow-
ing manner:
a) The moon phases by pressing to the
bottom the push-button No. 1 (opp. 4
o’clock). Advance the disc till full moon
(same position of the moon as shown on
illustration).Youmayjudgeafterwardsby
means of a calendar the number of days
which have passed since the last full
moon and advance the moon disc by the
same number of day.
b)Thedatehandpush-buttonNo.1(opp.
4 o’clock) slight pressure.
c)Thedaysbypush-buttonNo.3(opp.10
o’clock)
From now on you can set your watch to
the correct time.
Important: do not use the push-buttons
No. 1 and No. 3 between 22h00 and
05h00 as it is at that moment that the
automatic change takes place.
The precision tolerance of a Venus move-
ment can be up to 1 minute per day.
4.4 Quartz chronograph
Edox 013, 019, 103
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
to turn the hour hand until the desired
date is reached and push it back to posi-
tion 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1/10 of a second for up to
30 minutes (12 hours for the refer-
ence 013).
Pusher B: reset (after a stop)
Accumulated timing chronograph:
Press button A to start. Press button B
after arrival of the first “sprinter” – The
time will be indicated. Press button A after
arrival of the second “sprinter” – The time
is memorized. Read the time of the first
“sprinter”. Press button B to read the time
of the second “sprinter” (the chronograph
hands will turn at a faster speed until indi-
cation of the time). Press button B to reset
hands to zero.
NB: the hands should be reset to their
original position before the chronograph is
used:
Resetting of the 1/10 seconds hand to
zero: crown in position 3 and pusher B.
Resetting of the 60 seconds hand to
zero: crown in position 3 and pusher A.
Resetting of the 30 minutes hand
(12 hours hand for the reference 013)
to zero: crown in position 2 and pusher B.
Only for reference 013:
Resetting of the 12 hours hand to
zero: crown in position 2 and pusher A.
After setting the hands to their original
positions, return to crown position 1.
Edox 015
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1 second for up to 60 minutes
Pusher B: reset (after a stop)
Split Time function
Pusher A: start
10
Pusher B: stop to read the split time.
The chronograph continues to operate.
Pusher B: restart
The chronograph hands catch up with the
elapsed time.
Pusher A: for the last stop and to display
the total time.
Pusher B: reset.
NB: the hands should be reset to their
original position before the chronograph is
used:
Resetting of the 60 minutes hand to
zero: crown in position 2 and pusher B.
Resetting of the 30 seconds hand to
zero: crown in position 3 and pusher A.
Resetting of the 5 minutes hand to
zero: crown in position 3 and pusher B.
After setting the hands to their original
positions, return to crown position 1.
Edox 10, 104
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop.
Turn the crown forwards or backwards.
Synchronise the seconds by pushing the
crown back to position 1 to coincide with
a given time signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1/10 of a second for up to
30 minutes.
Pusher B: reset (after a stop)
Accumulated timing chronograph:
Press button A to start. Press button B
after arrival of the first “sprinter” – The
time will be indicated. Press button A after
arrival of the second “sprinter” – The time
is memorized. Read the time of the first
“sprinter”. Press button B to read the time
of the second “sprinter” (the chronograph
hands will turn at a faster speed until indi-
cation of the time). Press button B to reset
hands to zero.
NB: the hands should be reset to their
original position before the chronograph is
used:
Pull out the crown to position 3.
Press the button A and B at the same time
for at least 2 seconds.
Press (1 x short for single or 1 x long for
continuous) button A to adjust the centre
stop second.
Press button B to adjust the next hand.
Press (1 x short for single or 1 x long for
continuous) button A to adjust the
1/10 second hand.
Press button B to adjust the next hand.
Press (1 x short for single or 1 x long for
continuous) button A to adjust the minute
hand.
Return to crown position 1.
4.5 Quartz watches
Edox 21, 28, 64
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Time setting: hours and minutes. Pull
the crown out to position 2.
Turn the crown forwards or backwards.
Push the crown back to position 1.
Edox 23
Watch functions:
The crown has 2 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop.
Turn the crown forwards or backwards.
Synchronise the seconds by pushing the
crown back to position 1 to coincide with
a given time signal.
11
Edox 26, 27
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
3. Time setting: hours and minutes. Pull
the crown out to position 3. Turn the
crown forwards or backwards. Push the
crown back to position 1.
Edox 34
Watch functions:
The crown has 4 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
4. Correcting the day: pull the crown
out to position 3. Turn the crown forwards
until the hands pass midnight. Repeat this
operation until the desired day is reached.
Edox 48
Watch functions:
The crown has 5 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
4. Setting the tide position: press the but-
ton B more than 3 seconds and after the
“bip”, release it and press again to adjust to
the local tide stage. 3 seconds after releas-
ing the button B, a “bip” will be audible to
confirm the setting.
5. Setting the tide range: press the but-
ton A more than 3 seconds and after the
“bip”, release is and press again to adjust
to the moon phase. 3 seconds after re-
leasing the button A, a “bip” will be audi-
ble to confirm the setting.
Edox 60, 63, 70, 86
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
(backwards for references 86) and push it
back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop.
Turn the crown forwards or backwards.
Synchronise the seconds by pushing the
crown back to position 1 to coincide with
a given time signal.
Edox 62
Watch functions:
The crown has 4 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
4. Correcting the dual time (GMT): pull
the crown A out to position B. Turn the
crown forwards or backwards to reach the
requested time and push it back to posi-
tion A.
12
2
4
A
C
B
1
3
2
4
A
C
B
5
1
Edox 84
Watch functions:
The crown has 4 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Correcting the day: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
4. Time setting: hours, minutes and sec-
onds. pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
4.6 Rally Movement
Edox 36
The calibre 36 has been developed exclu-
sively for Edox following the sponsorship
contract signed by Edox and North One
Sports Ltd, the company which owns the
commercial rights to the World Rally
Championships (WRC), an event for which
Edox has become the official timing part-
ner.
In addition to offering optimum perfor-
mance for car rallies, the functions of this
new calibre are also ideal for daily use and
for recording race timings for a variety of
sports activities (athletics, swimming, ski-
ing, etc.). Up to 15 timing recordings are
possible.
Description:
Hand 1 The minutes hand
Hand 2 The hours hand
Hand 3 (at 12h)
Hand 4 (at 9h)
Hand 5 (at 6h)
AT Penalty/Penalties (Additional Time)
Hand 4 at 9h
Has the following functions (modes):
•Time(displayoftime)
•Race(timingrecordingforoneormore
races)
•Replay(displayoftimingsforrecorded
races)
•TotalTimeorT.Time(displayof
cumulative total of recorded times)
•CountdownorCTDown(countdown
display)
•Chrono(chronographdisplay)
Useful tips:
With this calibre, developed exclusively for
Edox, you can measure and record 15 dif-
ferent timings and review all the recorded
timings.
Each recording has a maximum duration
of 59 minutes, 59 seconds and 9 tenths of
a second. The maximum accumulated re-
cording time possible is 15 hours,
59 minutes, 59 seconds and 9 tenths of a
second (once this time has been exceed-
ed, the various modes will be reset to
zero).
One or more “AT” (Additional Time) time
penalties can be added in Replay mode.
Also, a recorded time can be deleted if the
race being recorded had to be cancelled
(e.g. for safety reasons, because of an ac-
cident or disqualification).
The countdown (Countdown mode) can be
used optimally during service park stops
before the start of the next race.
Please note: there is no audible alarm
signal at the end of the countdown.
The Time, Race, Replay, Total Time,
Countdown and Chrono functions are
activated by pressing push-piece C,
according to availability.
Time setting (Time mode):
•Presspush-pieceCtopositionHand4
in Time mode.
•Presspush-piecesAandB
simultaneously for 2 seconds.
•Pullpush-pieceC.
•Presspush-pieceAtoadjustthe
minutes hand and push-piece B to
adjust the hours hand.
•Returnpush-pieceCtoitsinitial
position.
Recording a race (Race mode):
•Presspush-pieceCtopositionHand4
in Race mode.
•Presspush-pieceAtostartrecording.
Hand 3 indicates that the 1st race is
being recorded.
13
3
2
A
C
B
5
1
4
3
2
4
A
C
B
5
1
3
2
A
C
B
1
4
3
2
4
A
C
B
5
1
•Presspush-pieceAtostoprecording
the race. Hand 5 indicates
1/10 seconds.
The race’s recorded time will remain dis-
played for 3 minutes. Without having to
activate the push-pieces, the hands will
automatically return to zero. Hand 3 will
then position itself for recording the next
race.
To go directly to the next recording, press
push-piece B. Hand 3 will then be posi-
tioned ready for recording the next race.
•Presspush-pieceAtostartrecording
the second race.
Important note: once recording has
stopped, it cannot be restarted.
Important note: if, for safety reasons or
because of an accident, for example, the
race participant has not yet started, and
zero time must be recorded, press push-
piece B for 5 seconds. Hand 3 at 12h will
then be positioned for the next race and
zero time will be recorded.
If the race time has already been record-
ed, position Hand 4 in Replay mode (with
push-piece C). Press push-piece A to po-
sition on the recording to be cancelled.
Press push-piece B for 5 seconds. Hands
1 and 2 will position to zero and this re-
cording will then be cancelled definitively.
Display of recorded race times
(Replay mode):
•Presspush-pieceCtopositionHand4
in Replay mode.
•Presspush-pieceAaccordingtothe
number of recorded races in order to
review the recorded times.
Display of total recorded time (Total
Time mode):
•Presspush-pieceCtopositionHand4
in Total Time mode.
The time displayed by Hands 1 and 2 indi-
cate the total recorded time.
Addition of penalties (AT or
Additional Time):
•Presspush-pieceCtopositionHand4
in Replay mode.
•Pullpush-pieceCandHand3will
position itself on AT.
•Presspush-pieceAtoaddseconds
(Hand 1).
•Presspush-pieceBtoaddminutes
(Hand 2).
•Returnpush-pieceCtoitsinitial
position.
Use the same procedure to add a second
penalty.
Please note: Any new penalties should
be added to the previous penalty time by
following the same procedure.
Countdown display (Countdown
mode):
•Presspush-pieceCtopositionHand4
in Countdown mode.
•PressBtoshiftHand2,theminute
hand, back to the desired time.
14
•PressAtostartthecountdown.
•PressBtostopthecountdown.
Important note: once the countdown
has been stopped, it cannot be restarted.
Pressing A and B for more than 5 seconds
restarts this mode.
Chronograph display (Chrono mode):
•Presspush-pieceCtopositionHand4
in Chrono mode.
•Presspush-pieceAtostartthe
chronograph (intermediate time).
•Presspush-pieceBtostopthe
chronograph.
•Presspush-pieceBtoresetthe
chronograph to zero.
Intermediate time:
•Presspush-pieceAtostartthe
chronograph.
•Presspush-pieceAtodisplaythetime
of the first race.
•Presspush-pieceAtoreturntothe
timing.
•Presspush-pieceBtostopthe
chronograph.
•Presspush-pieceBtoresetthe
chronograph to zero.
Manually resetting Race and Replay
modes to zero:
•Presspush-pieceCtopositionHand4
in Replay mode.
•Presspush-piecesAandB
simultaneously for 5 seconds. The
times recorded in Race and Replay
modes are reset to zero (the total
accumulated time in Total Time mode
remains recorded).
Manually resetting Total Time mode
to zero:
•Presspush-pieceCtopositionHand4
in Total Time mode.
•Presspush-piecesAandB
simultaneously for 5 seconds. The total
accumulated time in Total Time mode
and the Race and Replay modes are
reset to zero.
Adjusting the hands:
Push-piece A enables you to adjust the
various hands.
Push-piece B enables you to change the
hand to be adjusted.
•Presspush-pieceCtopositionHand4
in Time mode.
•Pullpush-pieceC.
•Presspush-piecesAandB
simultaneously for 5 seconds. Hands 1
and 2 will position themselves at 12h.
•Presspush-pieceAtoadjustHand1.
•Presspush-pieceBtochangehands.
The next adjustment will be Hand 2.
•Presspush-pieceAtoadjustHand2.
•Presspush-pieceBtochangehands.
The next adjustment will be Hand 3.
•Presspush-pieceAtoadjustHand3.
•Presspush-pieceBtochangehands.
The next adjustment will be Hand 4.
•Presspush-pieceAtoadjustHand4.
•Presspush-pieceBtochangehands.
The next adjustment will be Hand 5.
•Presspush-pieceAtoadjustHand5.
Important note: To go directly from one
mode to another, simply press push-piece
B the number of times necessary to adjust
the desired hand.
Good to know: it is possible to wind back
the 3 sub-counter hands (hand 3, 4 and 5)
by pressing push-piece A for 2 seconds.
•Presspush-pieceCtoreturntoTime
mode.
4.7 How to shorten a rubber strap
Remove the steel buckle and spring bar
With a sharp blade, cut the necessary ex-
tra rubber piece off
Put the steel spring bar and buckle back
on
2
A
C
B
1
4
147
EDOX NETWORK
Europe
Albania Verde Watch&Jewels
Galeria»ETC», 4 Floor, Bul.Bajram curri
Tirana
Tel. 355 422 67 815 Fax. 355 422 67 815
Austria YvanBur
Gartenweg 3
2545 Selzach
Tel. +41 32 641 33 23 Fax. +41 32 641 33 30
Belarus Jana Watch Co Ltd
K. Marks Str. 34
220030 Minsk
Tel. +375 172 275 166 Fax. +375 172 891 074
Belarus Ziko Service Center
Svobody sq., 2
220050 Minsk
Tel +375 17 222 27 91 Fax +375 17 222 27 91
BE-NEL-LUX S. Weisz BV
Vlielandstraat 161
1181HNAmstelveen
Tel. +31 20 679 46 33 Fax. +31 20 662 12 64
Bulgaria Mega Trade 97 Ltd
Alabin Str 31
1000 Sofia
Tel. +359 2 986 45 68 Fax. +359 2 980 54 85
Croatia Krona
Savska Cesta 41
Zagreb
Tel. +385 6177084
Cyprus TerzianGaroN.G.N.
Onasagoras Street 72
Nicosia
Tel. +357 226 625 58 Fax. +357 226 734 03
Czech Republic Aviko Time s.r.o.
V Tisine 474/3
160 00 Praha 6
Tel. +420 224 252 070 Fax. +420 224 252 070
Estonia Balti Juveelikaubanduse
Kadaka Tee 36
10621 Tallinn
Tel. +372 699 7172 Fax. 372 699 7151
France YannMarescaux
7900 Route de Saint-Trosse
40200 Pontenx les Forges
Tel +33 6 10 66 05 23
Italy IWL Italia s.r.l.
Via A. Pitloò 9
80128Napoli
Tel. +39 3486661662 Fax. +39 390815786471
Georgia G&G
42 Abashidze St
0179 Tbilisi
Tel. +995 32 23 07 63
Germany Montres Edox & Vista SA
La Sagne au Droz
2714 Les Genevez
Tel +41 32 484 70 10 Fax +41 32 484 70 19
Greece Aravidis SA Watch Imports
Klissouras Street 10
54631 Thessaloniki
Tel. +30 2310221141 Fax. +30 2310284738
Hungary Ungaro Swiss Kft
Rakoczi Street 4-6, Astoria Center
1072 Budapest
Tel. +36 328 0078
148
EDOX NETWORK
Lettland Jet Ltd
Lachplesha Street 87F
LV 1011 Riga
Tel. +371 733 28 42 Fax. +371 733 28 10
Lithuania UAB Koliz Laikrodziai
41Naugardukog.41
03227 Vilnius
Tel +370 5 2130809 Fax. +370 5 235 6077
Moldavia I.I. Vabiscevici Angela
Bd. Stefan tel Mare, 128
2012 Chisinau
Tel. +373 222 294 84 Fax. +373 222 294 84
Norway H. Kleiser AS
Postboks 50 Tveita
0617 Oslo
Tel. +47 23126171 Fax. +47 23126171
arne@kleiser.no
Poland Apart Sp. z.o.o.
Ul. Stara Droga 3
62-002 Suchy Las
Tel. +48 61 892 72 78 Fax. +48 48 6189 55 666
Romania B&B Collection Srl
Str.TraianNr.3,Bl.E6,Sc.2,Et.7,Ap.54,Sector3
030571 Bucharest
Tel. +40 213 274 477 Fax. +40 213 274 467
Russia Optim
42, Kastanaevskaja st
121108 Moscow
Tel +7 499 1467047 Fax +7 495 799 9960
Slovakia Time Slovakia Plus s.r.o.
Josefska 7
811 06 Bratislava
Tel. +421 2544 346 43
Slovenia Slowatch d.o.o.
Gosposvetska c.5
1000 Ljubljana
Tel. +386 1 200 31 00 Fax. +386 1 200 31 10
Spain Rojas Mediterraneo S.L.
C/prim 51, Bajos
08911 Badalona
Tel. +34 934 644 384 Fax. +34 934 641 276
Switzerland YvanBur
Gartenweg 3
2545 Selzach
Tel. +41 32 641 33 23 Fax. +41 32 641 33 30
Turkey Mey Saat
A¸sirefendiCad.TürkiyeHan.No:33,Kat1,Daireno:2
Sirkeci - Istanbul
Tel +90 212 526 49 37 Fax +90 212 514 49 37
United Kingdom Ferndale U.K. Ltd
Stone House, Bashurst Copse
Bashurst Hill
RH12 9JE Itchingfield West Sussex
Tel. +44 (1403) 790 902 Fax. +44 (1403) 790 649
Ukraine Company Ultra
Office 704, 13, Chernyshevskogo str.
61057 Kharkov
Tel. +38 057 766 19 17 Fax. +38 057 766 88 77
149
EDOX NETWORK
America
Argentina Suevia Group
Maipú 687 Piso 8 Of. 10
1006 C.A.B.A. Buenos Aires
Tel. +54 4328 0810
Caribbean Mercantile Trading Ltd Inc Jasmine Corporate Center, Suite 7 & 8, Alcester Rd
Tel. +1 242 352 78 39 [email protected]
Brazil NatanJóias
Rua Vinícius de Moraes 111
Ipanema - RJ
Cep 22411-010
Canada Watch Service Centre of Canada
NoHaydenSt.
M4Y1V8Toronto
Tel. +1 416 595 9709 Fax. +1 416 595 6301
Chile Importadora y Comercial Altea Ltda.
Ave Kennedy 6890
7650672 Santiago
Tel. +562 426 66 77 Fax. 562 426 67 97
Colombia,
Honduras,
Nicaragua,
Panama, Ecuador,
Costa Rica,
El Salvador
South American Watch
Centra Empresarial Pase Real / Carrera 7 # 121-20, OF 201
Bogota - Columbia
Tel. +57 1 657 00 44
Guatemala Chronos
20 Calle 25-85 Zona 10
Centro Comercial Galerias La Pradera
Galerias La Pradera, Local 330
Guatemala City
Tel. +502 2366 61 40
Mexico Baselmex
Valle Dorado
06000 Mexico, DF
Tel. +55 5370 7766 Fax. +52 155 43 53 760
Nicaragua Gertsch & Molina SA
C.C. Managua, Modulo C-7
Managua
Tel. +50505 227 65 003
Panama Swiss Sport Corp
ViaEspana,PlazaRegencyNo.177
Panama
Tel. +507 204 2000 Fax. +507 204 2049
Peru Centro Suizo Relojero S.A.C.
PaseodelaRepublicaNo.111,OF.603
01 Lima
Tel. +51 427 0238 Fax. +51 428 5401
USA Gevril USA
9 Pinecrest Dr
ValleyCottageNY10989
Tel. +1 845 425 9882 Fax. +1 845 425 9897
Venezuela Grupo Ika CA
Avenida urdaneta edificio Latino. Piso 11 oficina 3
Caracas
Tel. +58 21 25635577 Fax. +58 21 25642328
150
EDOX NETWORK
Asia
Azerbajian Les Ambassadeurs
14 Azerbaijan Ave
Baku
Tel. +994 124 980 666 Fax. +994 124 980 666
immanuels@rambler.ru
China XinYu¬ClockGroupPtd
7/F.,GoldenBellPlaza,No98HuaihaiRoad
200021 Shanghai
Tel. +86 2 1538 589 70 Fax. +86 2 1538 590 47
India Kamla Retail Ltd
S.C.O. 6-7, Sector 8C, Madhya Marg.
160 009 Chandiragh
Tel. +91 1722 548 223
Japan GM International Co Ltd
1-6-17 Ikenohata Taiko-ku
110-0008 Tokyo
Tel. +81 03 5828 9080 Fax. +81 03 5828 9060
Kazakhstan Swiss Watches Almaty
Boutique 103, Zangar, Ablay Kahn 62
Almaty
Tel 7 727 273 29 14 ext. 1397
Malaysia WatatimeMarketingSDNBHD
36-1&2 Jalan 4/91, Taman Shamelin Perkasa
56100 Cheras Kuala Lumpur
Tel. +60 3928 618 18 Fax.+ 60 3928 618 18
Philippines Timebest Marketing Inc
Watch Check Service Center
S201A Beacon Plaza, Shaw Blvd
Mandaluyong City
Tel. +632 718 0333 Fax. +632 7183 397
Singapore All Watches
304, Orchard Rd, #B1-128 Lucky Plaza
238863 Singapore
Tel. +65 6732 7673 Fax. +65 6749 3378
South Korea Style Leader Inc
5th Fl., Dongho 38 B/D, 385-3, Shindang-dong,
Jung-Gu
100-834 Seoul
Tel. +82 2 2235 7848 Fax. +82 2 2237 7870
Taiwan Edox Watch Co Ltd
8F-1, 200, Sec1, Fu Shin South Road
Taipei
Tel. +886 2 8771 5869 Fax. +886 2 8771 9296
Thailand Crisben Co Ltd
35 C.S. Building Fl.2 Room 201, Surasak Rd Silom
10500 Bangkok
Tel. +66 2 635 9181 2
Cambodia,
Vietnam, Laos,
Myanmar
Geneva (Far East) PTE LTD
Aljunied Road 629 #07-03, Cititec Industrial Building
389839 Singapore
Tel. +855 232 233 22
151
EDOX NETWORK
Africa and Middle East
Bahrain Al Hawaj & Sons
PO Box 891
Manama
Tel +973 230 088Tel +973 161 60000 Fax +973 240 011
Iran Jam-e Jam
No.2721,Vali-eAsrStreet,oppositeJam-eJam
1966846361 Tehran
Tel +98 21 26216426 Fax +98 21 26216426
Mobile +98 912 3481861
Israel Mahog-Weisz Watches Ltd
14 Imber Street
49130 Tel Aviv
Tel. +972 7221 19499
Jordan Ibrahim & Khalid - Abu-Shaqra Trading Co
PO Box 6525
11118 Amman
Tel +966 2 6892 2920
i&k@gifts-center.com
Kuwait Al Rasheed Exhibition CO
PO Box 35196
Al-Shaab
36052 Kuwait
Tel +965 22411669 Fax +965 2411 668
Lebanon Zoughaib
Espace 2000 Street
PO Box 314
Zouk Mikael
Tel +961 9 223 224 Fax. +961 9 211 314
Oman Muscat Watch Centre LLC
PO Box 162
113 Muscat
Tel +968 796 962 Fax +968 793 494
Pakistan Kronos (Pvt) Limited
85,Shahra-e-Quaid-e-Asam
Lahore
Tel +92 42 36301826
Qatar Blue Salon
PO Box 6255, Suhaim Bin Hamad Street
Doha
Tel +974 444 66 111 Fax +974 444 66112
Saudi Arabia Mounir Watches & Jewellery
Al-Mousa Center Olay Road
PO Box 120
Riyadh 11411
Tel +966 1 46 27 283 Fax +966 1 46 59 406
Saudi Arabia AhmedSaeedNajiEst.
PO Box 6196, Alsitteen Commercial Centre
Abdullah Oreif Street
21955 Makkah
Tel +966 (2) 542 8512 / 5428835 Fax +966 (2) 5458976
Syria Alzaman Watches
Mardam Beik Street - PO Box 490
Damascus
Tel +963 11 333 1619 Fax +963 11 335 01 210
U A E Style Gallery
PO Box 6115
Abu Dhabi
Tel +971 2 68 111 88 Fax +9712 68 182 22
Yemen Swiss Watches Union Agency (SWUA)
AlQsr.Str.PO3732
Sana’a
Tel +967 1 272 827 Fax +967 1 272 479
Algeria Bijhor Sàrl
RouteSidiYahiaCité102
Hydra
Tel +213 215 64846
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
SEVEN FRIDAY S-series User manual
-
sternglas S01-MO05-PR15 User manual
-
sternglas Edition Roncalli Watch User manual
-
STERNGLAS ZEITMESSER Chrono User manual
-
sternglas Kanton 2.0 Silver-Brown Watch User manual
-
sternglas Asthet 40mm Automatic White-Black Leather Watch User manual
-
sternglas Automatic Naos Watch User manual
-
sternglas hamburg Operating instructions
-
sternglas Kanton Operating instructions
-
sternglas SELECTA Operating instructions
