SeriesLT-40151

Mitsubishi Electric SeriesLT-40151 User manual

  • Hello! I am an AI chatbot trained to assist you with the Mitsubishi Electric SeriesLT-40151 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Guidelines for setting up and using your new widescreen TV start on • page 7.
Forquestions:•
Visitourwebsiteatwww.mitsubishi-tv.com.-
E-mailusatMDEAservice@mdea.com.-
CallConsumerRelationsat- 800-332-2119.
Forinformationon• System Reset,pleaseseethebackcover.
Toorderreplacementoradditionalremotecontrols,visitourwebsiteatwww.mitsuparts.comorcall•
800-553-7278.
153 and 249 Series.• IRemittercablesforNetCommandhome-theatercontrolareavailableforpurchase
fromMitsubishi.
Call800-553-7278and
requesteitherpartnumber242D483020(two-endedcable)orpart
number299P254020(four-endedcable).
IMMERSIVESOUNDLCDHDTV
withIntegratedSoundProjector
MODELS
151 Series
LT-40151, LT-46151, LT-52151
153 Series
LT-40153, LT-46153, LT-52153
249 Series
LT-46249, LT-52249
OWNERSGUIDE
FCC Declaration of Conformity
Product: LCDFlatPanelHDTV
Models: LT-40151,LT-46151,LT52151
LT-40153,LT-40153,LT-52153
LT-46249,LT-52249
Responsible
Party:
MitsubishiDigitalElectronics
America,Inc.
9351JeronimoRoad
Irvine,CA92618-1904
Telephone: (800)332-2119
ThisdevicecomplieswithPart15oftheFCCRules.
Operationissubjecttothefollowingtwoconditions:
(1)
Thisdevicemaynotcauseharmfulinterference,
and
(2) Thisdevicemustacceptanyinterference
received,includinginterferencethatmaycause
undesiredoperation.
Note: Thisequipmenthasbeentestedandfound
tocomplywiththelimitsforaClassBdigitaldevice,
pursuanttopart15oftheFCCRules.Theselimits
aredesignedtoprovidereasonableprotection
againstharmfulinterferenceinaresidentialinstal-
lation.Thisequipmentgenerates,usesandcan
radiateradiofrequencyenergyand,ifnotinstalled
andusedinaccordancewiththeinstructions,may
causeharmfulinterferencetoradiocommunica-
tions.However,thereisnoguaranteethatinterfer-
encewillnotoccurinaparticularinstallation.Ifthis
equipmentdoescauseharmfulinterferencetoradio
ortelevisionreception,whichcanbedetermined
byturningtheequipmentoffandon,theuseris
encouragedtotrytocorrecttheinterferencebyone
ormoreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna.-
Increasetheseparationbetweentheequip--
mentandthereceiver.
Connecttheequipmentintoanoutleton-
acircuitdifferentfromthattowhichthe
receiverisconnected.
Consultthedealeroranexperiencedradio/-
TVtechnicianforhelp.
Changes or modifications not expressly
approved by Mitsubishi could cause harmful
interference and would void the user’s authority
to operate this equipment.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TOREDUCETHERISKOFELECTRIC
SHOCK,DONOTREMOVECOVER(ORBACK).
NOUSERSERVICEABLEPARTSINSIDE.REFER
SERVICINGTOQUALIFIEDSERVICEPERSONNEL.
TV WEIGHT:ThisTVisheavy.Exerciseextremecare
whenliftingormovingit.LiftormovetheTVwitha
minimumoftwoadults.TopreventdamagetotheTV,
avoidjarringormovingitwhileitisturnedon.Always
poweroffyourTV,unplugthepowercord,anddiscon-
nectallcablesbeforemovingit.
WARNING:Toreducetheriskoffireorelectricshock,
donotexposethisapparatustorainormoisture.
WARNING:Thisproductcontainschemicalsknown
totheStateofCaliforniatocausecancerand/orbirth
defectsorotherreproductiveharm.
WARNING:Thisproductshallbeconnectedtoa
MAINSsocketoutletwithaprotectiveearthingconnec-
tion.
MAINS DISCONNECTION:Themainsplugisused
asthedisconnectdevice.Themainsplugshallremain
readilyoperable.
Featuresandspecificationsdescribedinthisowner’s
guidearesubjecttochangewithoutnotice.
Thelightningflashwitharrowheadsymbol
withinanequilateraltriangleisintendedto
alerttheuserofthepresenceofuninsulated
“dangerousvoltage”withintheproduct’s
enclosurethatmaybeofsufficientmagnitudetoconsti-
tuteariskofelectricshocktopersons.
Theexclamationpointwithinanequilat-
eraltriangleisintendedtoalerttheuserto
thepresenceofimportantoperatingand
maintenance(servicing)instructionsinthe
literatureaccompanyingtheproduct.
For Your Records
Recordthemodelnumber,serialnumber,and
purchasedateofyourTV.Themodelandserial
numbersareonthebackoftheTV.Refertothis
pagewhenrequestingassistancewiththeTV.
MODEL NUMBER
SERIAL NUMBER
PURCHASE DATE
RETAILER NAME
LOCATION
Contents
ImportantSafetyInstructions................ 4
ImportantInformationAboutYourTV.......... 5
SpecialFeaturesofYourTV................. 6
1 Basic Setup and Operation
PackageContents....................... 7
StandInstallation........................ 8
Wall-Mounting.......................... 8
BeforeYouBegin........................ 9
First-TimePower-On...................... 9
TVControls........................... 10
SettingUpTVInputs..................... 12
BasicTVOperation...................... 14
2 TV Connections
BeforeYouBegin....................... 16
CableManagement..................... 16
InputsandOutputs...................... 17
YPbPrComponentVideoDevice........... 20
H
DMIDevice............................ 20
DVIVideoDevice....................... 21
CompositeVideoDevice.................. 21
AntennaorCableTVService............... 21
VCRorDVDRecordertoanAntennaor
WallOutletCable...................... 22
VCRorDVDRecordertoaCableBox........ 22
A/VReceiver.......................... 23
A/VReceiverwithHDMIOutput............. 23
Subwoofer............................ 24
Audio-OnlyDevice...................... 24
3 Using TV Features
SelectinganInput...................... 25
SleepTimer........................... 25
ChannelViewChannelListings.............. 26
RedirectingAudioOutput................. 26
ControllingA/VReceiverVolume............ 26
StatusDisplay......................... 27
TVSignalsandDisplayFormats............. 28
UsingtheTVwithaPersonalComputer....... 29
CameraImagesandMusicFiles............ 31
SoundProjector........................ 34
StreamingInternetMovieswithVUDU........ 37
IntroductiontoHome-TheaterControl........ 39
4 TV Menus
MainMenu............................ 40
MenuNavigation....................... 40
Adjust............................... 41
Captions............................. 46
Initial................................ 47
Inputs............................... 50
Lock................................ 52
5 NetCommand IR Control
AboutNetCommandIRControl............. 55
IREmitterPlacement.................... 56
InitialNetCommandSetup................ 57
OperatingNetCommand-ControlledDevices... 58
6 NetCommand IR Control of an A/V Receiver
ControllinganA/VReceiverafter
NetCommandSetup.................... 61
SettingUpA/VReceiverControl
PowerandVolume................... 62
AutomaticSwitching(AudioorAudio/Video). 63
Appendices
AppendixA:ProgrammingtheRemoteControl. 68
AppendixB:HDMIControlofCECDevices.... 75
AppendixC:TVCare.................... 78
AppendixD:BypassingtheParentalLock..... 79
AppendixE:Troubleshooting.............. 81
Trademark and License Information.......... 88
Network Service Disclaimer................ 88
Warranty.............................. 92
Index................................. 94
4
Important Safety Instructions
PleasereadthefollowingsafeguardsforyourTVand
retainforfuturereference.Alwaysfollowallwarnings
andinstructionsmarkedonthetelevision.
1) Readtheseinstructions.
2) Keeptheseinstructions.
3) Heedallwarnings.
4) Followallinstructions.
5) Donotusethisapparatusnearwater.
6) Cleanonlywithdrycloth.
7) Donotblockanyventilationopenings.Installin
accordancewiththemanufacturer’sinstructions.
8) Donotinstallnearanyheatsourcessuchas
radiators,heatregisters,stoves,orotherapparatus
(includingamplifiers)thatproduceheat.
9) Donotdefeatthesafetypurposeofthepolarized
orgrounding-typeplug.Apolarizedplughastwo
bladeswithonewiderthantheother.Agrounding
typeplughastwobladesandathirdgrounding
prong.Thewidebladeorthethirdprongare
providedforyoursafety.Iftheprovidedplugdoes
notfitintoyouroutlet,consultanelectricianfor
replacementoftheobsoleteoutlet.
10) Protectthepowercordfrombeingwalkedon
orpinchedparticularlyatplugs,convenience
receptacles,andthepointwheretheyexitfromthe
apparatus.
11) Onlyuseattachments/accessoriesspecifiedbythe
manufacturer.
12) Useonlywiththecart,
stand,tripod,bracket,
ortablespecified
bythemanufacturer,
orsoldwiththe
apparatus.When
acartisused,use
cautionwhenmoving
thecart/apparatus
combinationtoavoid
injuryfromtip-over.
13) Unplugthisapparatus
duringlightningstormsorwhenunusedforlong
periodsoftime.
14) Referallservicingtoqualifiedservicepersonnel.
Servicingisrequiredwhentheapparatushasbeen
damagedinanyway,suchaspower-supplycordor
plugisdamaged,liquidhasbeenspilledorobjects
havefallenintotheapparatus,theapparatushas
beenexposedtorainormoisture,doesnotoperate
normally,orhasbeendropped.
ANT E NN A
LE AD IN W IR E
ANT E NN A
DIS C HAR G E UNIT
(NE C AR TIC LE 810-20)
G R OUNDING
C ONDUC T OR S
(NE C AR TIC LE 810-21)
G R O U ND C LAMP S
P OW E R S E R VIC E G R OUNDING
E L E C TR ODE S YS TE M
(NE C AR T 250, P AR T H)
G R O U ND C LAMP
E LE C T R IC
S E R V IC E
E QUIP ME NT
NE C NAT IO NAL E LE C TR IC AL C O DE
E XAMP LE O F ANT E NNA G R OUNDING
Outdoor Antenna Grounding
Ifanoutsideantennaorcablesystemisconnected
totheTV,besuretheantennaorcablesystemis
groundedsoastoprovidesomeprotectionagainst
voltagesurgesandbuilt-upstaticcharges.
Replacement Parts
Whenreplacementpartsarerequired,besurethe
servicetechnicianhasusedreplacementpartsspeci-
fiedbythemanufacturerorhavethesamecharacter-
isticsastheoriginalpart.Unauthorizedsubstitutions
mayresultinfire,electricshockorotherhazards.
5
Important Information About Your TV
Installation Notes
Forstandinstallationandwall-mounting,seepage8.
Use with other than the authorized accessories
may cause the TV to become unstable, which can
cause damage to the product or possible injury.
Custom cabinet installation must allow for proper
air circulation around the television.
NOTE TO CATV SYSTEM INSTALLER: THISREMINDER
ISPROVIDEDTOCALLTHECATVSYSTEMINSTALLER’S
ATTENTIONTOARTICLE820-40OFTHENECTHATPRO-
VIDESGUIDELINESFORTHEPROPERGROUNDINGAND,
INPARTICULAR,SPECIFIESTHATTHECABLEGROUND
SHALLBECONNECTEDTOTHEGROUNDINGSYSTEMOF
THEBUILDING,ASCLOSETOTHEPOINTOFCABLEENTRY
ASPRACTICAL.
TV Software
DonotattempttoupdatethesoftwareofthisTVwith
softwareorUSBdrivesnotprovidedbyorauthorizedby
MitsubishiDigitalElectronicsAmerica,Inc.Non-authorized
softwaremaydamagetheTVandwillnotbecoveredby
thewarranty.
If Your TV Gets Damaged
CrystallineliquidmayleakfromtheLCDpaneland
brokenglassmaybescattered.
CAUTION: The crystalline liquid is toxic. Avoid
contact with your skin, eyes, or mouth.DONOT
touchthebrokenglassorcrystallineliquid.DONOTget
glassfragmentsorcrystallineliquidintoeyesormouth.
Should either contact your eyes or mouth, rinse the
contacted area thoroughly with water and consult
your doctor.
Disposal of Your TV
TheLCDpanelcontainsasmallamountofcrystalline
liquidandthefluorescenttubeinthepanelcontains
mercury.Botharetoxicandshouldnotbetouched.
DO NOT dispose of the TV with general household
waste.THELAMPSINSIDETHISPRODUCTCONTAIN
MERCURYANDMUSTBERECYCLEDORDISPOSED
OFACCORDINGTOLOCAL,STATE,ANDFEDERAL
LAWS.Fordisposalorrecyclinginformation,contact
yourlocalauthoritiesortheElectronicIndustriesAlli-
anceatwww.eiae.org.
6
Special Features of Your TV
Yournewhigh-definitionwidescreentelevisionhas
manyspecialfeaturesthatmakeittheperfectcenterof
yourhomeentertainmentsystem,including:
1080p High-Definition LCD Display System
YourMitsubishiLCDFlatPanelHDTVusesafull1920
x1080LCDpaneltocreatethepictureyouseeonthe
screen.Allimagesaredisplayedat1080p.TheTVuses
newPlush1080p®5Gdigitalvideoprocessingtoconvert
lower-resolutionsignalsto1080pfordisplay.
Smooth120Hz™ Film Motion
Smooth120Hz™FilmMotionmakesfast-movingimages
appearsmootherandmorefluid,freefrommotionblur.It
doesthisbydoublingthetraditionalprogressivescan
framerateandcreatesnewframesofvideobetweenthe
traditionalframestocreatesmoothermovingimages.
Smooth120Hz™FilmMotionalsosmoothsfilmjudder
(imagevibration)thatmaybepresentinfilm-based
contentsuchasmovies.
16:9 Widescreen Picture Format
Enjoyafulltheatricalexperienceinthecomfortofyour
home.Viewpicturesasfilmdirectorsintendedthem.
DigitalTVbroadcasts,DVDsandnewervideogame
consolessupportthiswidescreenformat.
Integrated HDTV Tuner
YourwidescreenMitsubishiHDTVhasaninternalHDTV
tunerabletoreceivebothover-the-airHDTVbroad-
casts(receivedviaanantenna)andnon-scrambled
digitalcablebroadcasts,includingnon-scrambled
HDTVcableprogramming.
High-Definition Video Inputs
Component Video Inputs.• AlsocalledY/Pb/Pr
inputs,theseinputsreceivestandardanalogvideo
formatsof480i,480p,720p,and1080ihigh-defini-
tionsignals.Thisprovidesahighlevelofflexibility
whenconnectingDVDplayers/recorders,cable
boxes,andsatellitereceivers.
HDMI Inputs.• Theseinputsacceptdigital480i,
480p,720p,1080i,and1080pvideosignalsplus
bitstreamandPCMdigitalstereosignals.The
HDMI™inputscanalsoacceptavarietyofPC
signalsandresolutions.Theseinputssupport
HDMI1.3DeepColor(upto36bits)andthe
x.v.Color extendedcolorgamut.
Usedwithanadapter,theseinputsalsoaccept
compatibledigitalDVIvideosignals.HDMI
inputsprovideadditionalhigh-performance,
high-definitionconnectionsformaximumflexibility
inyourchoiceofhometheaterproducts.TheHDMI
inputsareHDCPcopy-protectioncompatible.
Easy Connect Auto Input Sensing
EasyConnect™AutoInputSensingautomaticallyrec-
ognizeswhenyoupluginadeviceandpromptsyouto
assignanametoit.
Home-Theater Control
HDMI Control
Available for all models.HDMIdeviceswithConsumer
ElectronicsControl(CEC)capabilitiesmaybecompatible
withtheTVsHDMIControlfeature.Compatibledevices
canreceivecontrolsignalsthroughtheHDMIconnection,
allowingtheTVsremotecontroltooperatesomefunc-
tionsofthesedevices.
NetCommand with IR Learning
153 and 249 Series.YourMitsubishiHDTVoffersanew
levelofnetworkingthatseamlesslyintegratesselected
olderA/Vproductswithnewandfuturedigitalproducts.
NetCommand®supportsIR(infrared)controlofproducts
suchasVCRs,DVDplayers,cableboxes,andsatel-
litereceivers.NetCommandcan“learn”remotecontrol
signalsdirectlyfrommanydevices,allowingyoutocreate
acustomizedNetCommand-controlledhome-theater
system.
Sound Projector
SoundProjectortechnologyusestheTVsbankof
speakerstocreateasimulatedsurroundsoundeffect
byreflectingsoundofftheroomwalls.
Internet Video Streaming with VUDU
249 Series.VUDUoffersthelargeston-demandHD
movieselectionanywhere,featuringfull1080pand5.1
surroundsound.VUDUallowsyoutoenjoymovieswithno
storevisits,nomailing,nolatefeesandnosubscriptions.
ENERGY STAR®
ThisisanENERGYSTAR®qualifiedTV.Productsthat
earntheENERGYSTARpreventgreenhousegasemis-
sionsbymeetingstrictenergyefficiencyguidelinesset
bytheU.S.EnvironmentalProtectionAgencyandthe
U.S.DepartmentofEnergy.ThisTVconsumespower
inexcessofENERGYSTARguidelinesunderthefollow-
ingconditions:
TV Feature Active
TV Power
Status
PictureModesettoBrilliant On
Fast Power Onenabled
Off
153 and 249 Series.ExternalController
Inputenabled
7
Basic Setup and Operation
1
Package Contents
Pleasetakeamomenttoreviewthefollowinglistof
accessoryitemstoensurethatyouhavereceived
everything.
Remote Control Batteries
Removetheremotecontrolbackcover.1.
Emitter
Bulb
Loadthebatteries,makingsurethepolarities2.
(+)and(-)arecorrect.Insertthenegative(-)
endfirst.
Slidethecoverbackintoplace.3.
Remote Control1.
GUIDE MENU INFO BACK
ACTIVITY
Two AA Batteries2.
AA
AA
Basic Owner’s 3.
Guide
HDTV Quick Setup 4.
Guide
Product Registra-5.
tion Card
Power Cord6.
Cable Tie7.
Stand Screws8.
153 and 249 Series. 9.
Calibration Micro-
phone
8 1. Basic Setup and Operation
1
Back
Extension pieces
on back of stand
2
3
TV
CAUTION.
Place the
stand in the foam insert
with the extension pieces
facing away from the TV.
Otherwise, the TV will be
damaged in transit.
Protect the TV and
stand with the original
packing material.
DON’T place your hand where it can get
caught between the TV and stand.
DO support the TV
under the corners.
TV in protective
wrapping
Extension pieces on stand
must face out, away from TV.
Repacking the Stand
Two adults are required to lift the TV.
Wall-Mounting
Stand Installation
1
Back
Extension pieces
on back of stand
2
3
TV
CAUTION.
Place the
stand in the foam insert
with the extension pieces
facing away from the TV.
Otherwise, the TV will be
damaged in transit.
Protect the TV and
stand with the original
packing material.
DON’T place your hand where it can get
caught between the TV and stand.
DO support the TV
under the corners.
TV in protective
wrapping
Extension pieces on stand
must face out, away from TV.
Repacking the Stand
Two adults are required to lift the TV.
Ifplanningtowall-mounttheTV,donotinstallthe
stand.Toorderawall-mountkit,pleasecontact
PeerlessIndustries,Inc.at(800)473-3753orvisit
www.peerlessmounts.com.Orderwall-mountkitmodel
ST650.
CAUTION: Using this TV with other than the authorized accessories may cause the TV to become unstable,
which can cause damage to the product or possible injury.
Toorderawall-mountkitfromMitsubishiDigitalElec-
tronicsAmerica,Inc.,pleasevisitwww.mitsuparts.com
orcall(800)553-7278.
Completeinstallationinstructionsareincludedwiththekit.
Required:PhillipsScrewdriver
CAUTION
At least TWO PEOPLE are
required to install the stand. Support
the TV near the corners as shown. Failure to
follow these recommendations may result in
personal injury and damage to the
product.
1. Basic Setup and Operation 9
Before You Begin
Reviewtheimportantsafety,installation,andoper-
1.
atinginformationatthebeginningofthisbook.
ChoosealocationforyourTV.
2.
• See the stand-installation or wall-mounting
requirements on the opposite page.
• Allowatleastfourinchesofspaceonallsides
oftheTVtohelppreventoverheating.Over-
heatingmaycauseprematurefailureoftheTV.
• Avoidlocationswherelightmayreflectoffthe
screen.
Installthebatteriesintheremotecontrol.
3.
PlugtheTVintoanACpoweroutlet.
4.
TV power connection
Welcome Screen Energy Options
Mitsubishirecommendsthe• Homesetting,which
usespowerwithinENERGYSTAR®guidelines.
Home Fast Power On• allowstheTVtopowerup
quickly.Whilepoweredoff,however,theTVuses
powerinexcessofENERGYSTARguidelinesfor
apowered-downdevice.
The• Retailsettinglooksbestunderbrightlight-
ing.Inthismode,theTVusespowerinexcess
ofENERGYSTARguidelines.
Thistablecomparesenergychoicesofferedinthe
Welcomescreen.
Home
Home Fast
Power On
Retail
Picture Mode Bright Bright Brilliant
Backlight
Level
Reduced
Brightness
Reduced
Brightness
Full
Brightness
Time to
Power On
Normal Fast Normal
First-Time Power-On
Confirmthattheremote
1.
controlisin
TV
mode.
Pressthesidebutton•
oncetolightthemode
indicatorandconfirm
that
TV
modeisactive.
Tochange,pressthe•
sidebuttonadditional
timestoactivate
TV
mode.
GUIDE MENU INFO BACK
TV
Aimtheremotecontrol
2.
attheTVandpressthe
POWER
key .Waitforthe
Welcomescreen.
GUIDE MENU INFO BACK
Press
3.
ifyouwishto
changethemenulanguage
toEspañol.
Press
4.
tomovetothe
energy-modeselections.
Seetheinformationboxfor
details.
Press
5.
tohighlightEXIT.
Press
ENTER
toclearthe
menu.
10 1. Basic Setup and Operation
Remote Control
PowersTVonoroff
Sidebuttonsetsthecontrolmode
forthetypeofdevicetooperate.Set
modeto
TV
fornormalTVviewing.
Number/letterkeys
Channeltuning,page14
MORE
Displaysamenushowingaddi-
tionalfunctionsforthenumber
keys.
Forthe•
MORE
menuinTVmode,
seebelow.
Withremotecontrolprogrammed•
foranotherdevice,the
MORE
menu
isspecifictothedevice.Seepage
68.
ForCEC-enableddevices,• page75
CHANNEL UP
VOLUME UP
Record/Playbackcontrolsforexternaldevices
Whenremotecontrolisprogrammed,page68
HDMIcontrol,page77
153 and 249 Series:NetCommand,page58
VCR

CABL/SAT

TV

DVD

AUDIO
Control-modeindicatorfordevice
typetocontrol.Usethesidebuttonto
change.
MUTE
VOLUME DOWN
LAST
.

Returnstothepreviouslytuned
channel.
CHANNEL DOWN
TV Controls
Note: Tooperateotheraudio/video
devicesusingtheTV’sremote
control:
• SeeAppendixA,“ProgrammingtheRemote
Control.”
• ForHDMIdevicescompatiblewiththeTVs
HDMIControlfeature,seeAppendixB.
• 153 and 249 Series
See- page55forNetCommandIR“Learn-
ing”ofdevicekeys.
ForuseofspecifickeyswithNetCom--
mand-controlleddevices,see“Special
OperationMethods,”page58.
The MORE menu in TV mode
GUIDE
ChannelViewlistings,page26
.
MENU
TVmainmenu,page40
INFO
TVstatus(
page27)
orTVhelp.
BACK
Stepsbackonemenu;clears
thetopmenuorStatusDisplay.
(
PAUSE
)
FreezesabroadcastTVpicture.
Addsaseparatorwhenenteringdigital
channelnumbers.Clearssomemenuentries.
PresstoselectaTVactivityandinput.
Seepage25.
249 Series:Seepage68.
249 Series:Seepage68.
PAGE UP
ENTER
Selectsachannelnumberor
menuitem.
  Navigationcontrols
PAGE DOWN
SLEEP
SleepTimer,page25
FORMAT
Pictureshape(aspectratio),page28
MORE
Clears
theMOREmenu.
CC
ClosedCaptions,page46
VIDEO
Videoadjustments,
page41
AUDIO
Audioadjustments,
page42
1. Basic Setup and Operation 11
TV Control Panel
Buttonsonthecontrolpanelduplicatesomekeyson
theremotecontrol.
ACTIVITY
• ,
CH
,and
VOL
areavailablewhennoTV
menusaredisplayed.
•   and
ENTER
areavailablewhenusingTV
menusorafteractivatingaspecialfunction.
System Reset
IftheTVfailstorespondtotheremotecontrol,the
control-panelbuttons,orwillnotpoweron/off,perform
SystemReset.Recentsettingchangesmadebefore
usingSystemResetmaybelost.
ToperformSystemReset,pressandholdthe
POWER
buttononthecontrolpanelfortenseconds.
Panel-Lock Release
To• releasethePanelLockusingtheTVcontrol
panel,pressandholdthe
ACTIVITY
buttononthe
controlpanelfortenseconds.IftheTVisoff,press
the
POWER
buttontohaveitpoweron.
ToactivatethePanelLock,usethe• Lockmenu,
page54.
TV Controls, continued
Key
Off
SteadyOn
SlowBlinking
LED Color TV Condition Additional Information
None TVispoweredoff. Normaloperation.
Green TVispoweredon. Normaloperation.
Green TVpoweredoff,auto-onTVTimer
isset.
Normaloperation.TVcanbeturnedonatanytime.
Red TVmayrequireservice.
TurnofftheTVandunplugthesetfromtheACpowersource.
Waitoneminuteandthenplugthesetbackin.SeeAppendixE.
IftheredLEDisstillon,contactyourdealeroraMitsubishi
AuthorizedServiceCenter.Gotowww.mitsubishi-tv.comorcall
1-800-332-2119toreceiveAuthorizedServiceCenterinformation.
POWER Indicator
POWER
The TV control panel is located
on the side.
TheTV’sIR(infrared)sensor
receivessignalsfromthe
remotecontrol.Donotcover
thesensor.
IR Sensor
12 1. Basic Setup and Operation
Setting Up Other Inputs
ConnectyourdevicestotheTV,makingnoteof
1.
whichTVinputjackisusedforeachdevice.See
“TVConnections,”page16,forrecommendations.
Poweronthedevicestoensuredetection.
2.
PowerontheTV.
3.
TheTVwilldisplaytheNew Device Foundscreen
foreachnewconnectionitdetectsLearnmore
aboutAutoInput/AutoOutputSensingonthe
oppositepage.
Selectthedevicetypeifthedeviceisnotrecog-
4.
nizedautomatically.
Sample New Device
Found screen.
153 and 249 Series.
5.
YoucanperformNetCom-
mandIR“learning”afterselectingthedevicetype
oratalatertimewhenconvenient.Toperformnow,
highlightNetCommandandpress
ENTER
.See
“InitialNetCommandSetup,”page57or“SettingUp
A/VReceiverControl,”page62.
Important Note for NetCommand IR Users
153 and 249 Series. Besuretoselectthecorrect
devicetypehere.Althoughyoucanchangethe
devicetypelaterintheInputs>Namemenu,any
“learned”NetCommandIRcodeswillbeerased
whenyoumakethechange.
Press
6.
BACK
toclosetheNew Device Foundscreen.
TheTVwillthendisplaytheNew Device Found
screenforthenextconnectionitfinds.
Channel Scan for Digital Channels
If you skip this step, the TV cannot receive digital
channels.
Ifusinganantennaordirectcableservice(nocable
box),connecttheincomingcoaxialcabletotheTVs
ANT
input.Refertopage21.
Youmustperformachannelscantoenablereception
ofallavailablehigh-definitionandstandard-definition
digitalchannels.Thechannelscanwillsearchfor
channelsavailablelocallyandsavethemtomemory.
Memorizing Channels with Channel Scan
For the ANT input
To start channel memorization
PowerontheTV.
1.
Press
2.
MENU
andopentheInitial > Channelmenu.
Start channel memorization from the Initial > Channel
menu.
Press
3.
ENTER
toenterthemenu.
Select
4.
Ant Airifconnectedtoan
over-the-airantenna.SelectAnt
Cablefordirectcable(service
withoutacablebox).
Highlight
5.
Scanandpress
ENTER
.
Channelmemorizationmaytakeup
to15minutestocomplete.
To stop channel memorization before completion,
press
CANCEL
.
UsetheInitial > Channel>Editmenu(page48)for
additionalchanneloptions,suchasaddingordeleting
channelsfrommemory.
Setting Up TV Inputs
1. Basic Setup and Operation 13
About Auto Input Sensing/
Auto Output Sensing
ThisTV’sEasyConnect™AutoInputSensingfeature
detectsmostconnectionsautomatically.Theexcep-
tionsare:
Aconnectiononthe•
ANT
input
AnHDMIdevicethatispoweredoff.Poweron•
thedevicetoensuredetection.
Auto Sensing for Most Devices
Whenyoufirstconnectadevice,theTVwill:
a. Detecttheconnecteddeviceandautomatically
switchtoit.
b. Promptyoutoidentifythedevicetype.
c. 153 and 249 Series.Promptyoutoperform
NetCommandset-upforthedevice,ifavailable.
d. Repeatthesestepsforanyothernewlydetected
devices.
When You First Connect a Device
Most Device Types.• 
Selectthedevicetypefrom
theon-screenlist.Thedevicetypeyouselecthere
willappearasadeviceiconinthe
Activitymenu.
A/V Receiver•
TheTVdetectsaudioconnectionsonthe- DIGITAL
AUDIO OUTPUTjackandtheright(red)AVR
AUDIO OUTPUTjack.
ForanHDMIA/Vreceiver,select- AVRfrom
thelistofdevicetypesiftheA/Vreceiveris
notrecognizedautomatically.
HDMI CEC Devices Compatible with the TVs •
HDMI Control Feature.
CompatibleCEC-
enabledHDMIdevicesareoftenrecognizedauto-
maticallybytheTV.
HDMIControlmayallowyou
tocontrolsomefunctionsofaCEC-enableddevice.
SeeAppendixB,“HDMIControlofCECDevices.”
New Device Found screen for a device with HDMI
control enabled. Select On to enable the TV’s CEC
control of the device. In some cases, as in the
example above, you will also be prompted to select a
device name.
Tips on Auto Sensing
Chooseadifferentnameforeachinput.•
Theantennainput(•
ANT
)isneverdetected,
althoughyoucanturnofftheunusedantenna
inputintheInputs>Namemenu.
Changethedevicetypedisplayedinthe• Activity
menuintheInputs > Namemenu(page50).You
mustswitchtoadifferentinputbeforechanging
thedevicetype.
153 and 249 Series.• Any“learned”NetCom-
mandIRcodeswillbeerasedifyouchangethe
devicetypeintheInputs > Namemenu.
Reactivating Auto Sensing for an HDMI Input
WhenyoudisconnectanHDMIdevice,AutoSensingis
disableduntilyouperformthesesteps.
Switchtoanyinputotherthantheonetobedis-1.
connected.
DisconnecttheHDMIdevice.2.
DeletetheremovedHDMIdeviceinthe3. Inputs>
Namemenu(see“RemovinganHDMIDevice,”
page77).
ConnectthenewHDMIdeviceandthe4. New
Device Foundscreenwilldisplay.
Setting Up TV Inputs, continued
14 1. Basic Setup and Operation
Watching Broadcast TV
TV Connected to an Antenna, Direct Cable Service,
Cable Box, Set-Top Box, or Satellite Receiver
Press
1.
ACTIVITY
.
Press
2.
and toselectabroadcastsource.If
younameddevicesduringAutoInputSensing,
selectaninputfromtheWatch TVgroup.Note:
YourTVmayhaveonlyonegroup(Watch TV).
Note: FormoreabouttheActivitymenu,seepage25.
Activity menu, antenna input selected
Press
3.
ENTER
toswitchtotheinput.
TunetoachannelontheANTinputusinganyof
4.
thesemethods.
Enterthechannelnumberusingthenumber•
keysontheremotecontrolandpress
ENTER
.
Foratwo-partdigitalchannel,suchas3-1,
press
3
CANCEL
1
toenteradash(separator).
Press•
CHANNEL UP/CHANNEL DN
(+,)tochange
channelsonechannelatatime.
Press• 
(LAST)
toswitchbacktotheprevi-
ouslytunedchannel.
Antenna or Direct Cable Only.• Press
GUIDE
to
displayChannelViewchannellistings,highlight
achannelnumber,andpress
ENTER
totune.
Watching DVDs or Videos
TV Connected to a DVD Player, DVR, or VCR
Press
1.
ACTIVITY
.
Press
2.
and toselectamoviesource.Ifyou
nameddevicesduringAutoInputSensing,select
aninputfromtheWatch Moviegroup.
Activity menu, DVD input selected
Press
3.
ENTER
toswitchtotheinput.
Basic TV Operation
1. Basic Setup and Operation 15
Making Picture Adjustments
Togetthebestpictureunderdifferentviewingcondi-
tions,setthePictureModebeforechangingothervideo
settings.Basicpictureadjustmentsaredescribedon
page41.
Press
1.
MORE
.
Press
2.
8
(VIDEO).
Press
3.
 todisplaythePicture Modeadjust-
ment.
Press
4.
 toselectaPictureModeusingthese
guidelines:.
Name When to Use
Brilliant
Underbrightlight
Game
Withgamingconsoles
Bright Formostdaytimeviewing
Natural Formostnighttimeviewing
Press
5.
 todisplaythenameofthenextadjust-
mentyouwant.
Press
6.
 tomaketheadjustment.
Press
7.
BACK
toclearorjustwaitforthedisplayto
clearafterafewsecondsofinactivity.
Additionalpictureadjustmentsaredescribedonpages
44and45.
Audio Settings
Changing Audio Settings
Press
1.
MORE
.
Press
2.
9
(AUDIO).
Press
3.
 todisplaythenameoftheadjustment
youwant.
Press
4.
  tochangethesetting.
Changing the Audio Output
ToswitchaudiooutputfromtheinternalTVspeakersto
aconnectedexternalsoundsystemorheadphones:
Press
1.
MORE
.
Press
2.
9
(AUDIO).
Press
3.
 untiltheSpeakersoptionisdisplayed.
TheSpeakersoptionwilldisplayonlyifanA/V
receiverconnectionhasbeendetected.
Press
4.
toswitchbetweenTVandeitherAV
ReceiverorHeadphones.
Other TV Features
TosettheTVClocksee• page47.SettheTV
ClockifyouplantousetheTVTimer(page47)or
ChannelView(page26)features.
Tosetparentalcontrols,seethe• Lockmenu,page
52.
Note: 249 Series.Tosetparentalcontrolsfor
VUDUservice,usetheVUDUInfo & Settings
menu.
Tochangetheinputnamesthatappearinthe•
Activitymenu,seeInputs>Nameoptions,page
50.
Toprogramtheremotecontroltooperateother•
A/Vdevices,seeAppendixA,“Programmingthe
RemoteControl,”page68.
ToactivateAudioLocktocontrolanexternalsound•
systemwiththeTVsremotecontrolleftin
TV
mode.
Seepage69.
TocontrolcompatibledevicesusingHDMICEC•
control,seeAppendixB,“HDMIControlofCEC
Devices,”page75.
Toviewstillandmovingdigitalcameraimageson•
theTV,see“CameraImagesandMusicFiles,”page
31.
153 and 249 Series.• TocontrolA/Vdeviceswith
NetCommand,seechapter5,“NetCommandIR
ControlforMostDevices”on(page55).
249 Series.• Seepage37forinternetvideostream-
ingwithVUDU.
Basic TV Operation, continued
Other Information
General Cleaning.• See“CleaningRecommenda-
tions,”page78.
Troubleshooting, Service, and Product Support.• 
SeeAppendixE,page81.
Warranty Information.• SeetheTVwarrantyon
page92.
16
2TV Connections
Auto Input/Auto Output Sensing
TheTV’sAutoSensingfeatureautomaticallyrecognizes
mostconnectionsandpromptsyoutoidentifythetype
ofdeviceconnected.Seepage13formoreonAuto
Sensing.
Connection Types
Usetheconnectiontypesavailableonyourinput
devicesthatwillgivethebestvideoquality.For
example,chooseHDMIovercomponentvideo,and
choosecomponentvideoovercompositevideo.
Picture Quality
Forbestpicturequality,routesignalsdirectlyfromthe
inputdevicetotheTVwheneverpossible.
Surround Sound
Forbestsurroundsoundaudioquality,routeaudioor
HDMIcablesfromthesourcedevicedirectlytoyourTV
(forSoundProjector)ordirectlytoyourA/Vreceiverif
usinganexternalsoundsystem.
IMPORTANT
Accessory items such as cables, adapters,
splitters, or combiners required for TV
connections are not supplied with the TV.
These items are available at most electronics
stores.
Before You Begin
Cable Management
1
2
Install the cable tie
(supplied) in one of
the four mounting
holes on the back.
Lock the cable tie in place
by pushing the end into
the mounting hole.
To remove the cable tie,
squeeze the side tabs and
pull out.
Sample cable routing. Secure
the cable bundle with the
release tab facing out.
Press the release tab to
loosen the cable tie.
2. TV Connections 17
Inputs and Outputs
13
4
14
2
HDMI
(page20)
DIGITAL
AUDIO
OUTPUT
(page23)
SUBWOOFER
OUTPUT
(page24)
IR
NetCommand Output/
External Controller Input
153 and 249 series
NetCommand,page56
ExternalControllerInput,
page19
VIDEO
(compositevideo,
page22)
VIDEO
(compositevideo,
page22;withanaudio-
onlydevice,page24)
Y Pb Pr
(componentvideo,
page20)
Y Pb Pr
(componentvideo,
page20)
ANT
(page21)
USB
(page31)
USBa, USBb
(poweronly,
page37)
VIDEO
(compositevideo,
page22)
Y Pb Pr
(component
video,page20)
RS-232C
AVR AUDIO OUTPUT
R L
Connector Panels
2
HDMI
(pages20,23)
9
DVI/PC AUDIO
INPUT
(page21)
AVR AUDIO
OUTPUT
(page23)
DIGITAL AUDIO
INPUT
(page20)
5
6
8
10
34
7
3
4
11
Calibration
Microphone Input,
153 and 249 series
(page 36)
RS-232C
249 series
12
LAN
(Ethernet,port
page37)
LAN USBa USBb
13
249 Series. Additional ports are
located in the central recessed area.
18 2. TV Connections
Inputs and Outputs, continued
1. ANT (Antenna)
Connectyourmainantennaordirectcableservice(no
cablebox)to
ANT
.The
ANT
inputcanreceivedigital
andanalogover-the-airchannelsfromaVHF/UHF
antennaornon-scrambleddigital/analogcablesource.
2. HDMI™ Inputs (High-Definition
Multimedia Interface)
TheHDMIinputssupportuncompressedstandardand
high-definitiondigitalvideoformats,PCMdigitalstereo
audio,anddigital5.1surroundsound.Theseinputs
areHDCP(High-BandwidthDigitalCopyProtection)
compliant.
Mitsubishi recommends you use category 2 HDMI
cables,alsocalledhigh-speedHDMIcables,to
connectHDMI1.3sourcedevices.High-speedcat-
egory2cablesbringyouthefullbenefitsofDeepColor
andx.v.Color.
TheTV’sHDMIinputsarecompatiblewithmanyDVI-D
andHDMIcomputervideosignals.
UsetheHDMIinputstoconnecttoCEA-861HDMI
compliantdevicessuchasahigh-definitionreceiver
orDVDplayer.Theseinputssupport480i,480p,720p,
1080i,and1080pvideoformats.
TheseHDMIinputscanalsoacceptdigitalDVIvideo
signals.Toconnectadevice’sDVIoutputtotheTV’s
HDMIinput,useanHDMI-to-DVIadapterorcableplus
analogaudiocables.Connecttheanalogaudiocables
tothe
DVI/PC INPUT AUDIO
jacksontheTVtoreceive
leftandrightstereoaudiofromyourDVIdevice.
3. Y Pb Pr (Component Video)
Connectdeviceswithcomponentvideooutputstothis
jack.Usetheadjacent
AUDIO R
and
L
jacksifyouwish
tosendaudiototheTV.
4.
VIDEO
(Composite Video)
ConnectaVCR,DVDplayer,standardsatellitereceiver,
orotherA/VdevicetotheTV.Usetheadjacent
AUDIO
R
and
L
inputsifyouwishtosendaudiototheTV.
5. AVR AUDIO OUTPUT
Use
AVR AUDIO OUTPUT
tosendanalogaudioofthe
currentprogramtoananalogA/Vsurroundsound
receiverorstereosystem.Digitalaudiofromdigital
channelsandHDMIdevicesisconvertedtoanalog
audiobytheTVforoutputonthisjack.Thisistheonly
audioconnectionneededtotheTVifusingananalog
A/Vreceiverorstereosystem.
Headphones.Thesejackscanalsobeusedforhead-
phonesthatacceptstandardlinelevelaudiosignals.
Anadaptermaybeneeded.
6. DIGITAL AUDIO INPUT
ThisinputsendsdigitalsurroundsoundtotheTV’s
speakerarrayfromadevice,suchasaDVDplayer,
connectedto
INPUT 2
.
7. SUBWOOFER OUTPUT
ConnectapoweredsubwoofertocomplementSound
Projectorspeakereffects.
8. DIGITAL AUDIO OUTPUT
ThisoutputsendsDolbyDigitalorPCMdigitalaudio
toyourdigitalA/Vsurroundsoundreceiver.Incom-
inganalogaudioisconvertedbytheTVtoPCMdigital
audio.IfyouhaveadigitalA/Vreceiver,inmostcases
thisistheonlyaudioconnectionneededbetweenthe
TVandyourA/Vreceiver.
9. DVI/PC AUDIO INPUT
WhenconnectingaDVIdevicetooneoftheTVsHDMI
inputs,usethesejackstosendleftandrightanalog
audiototheTV.
HDMI Cable Categories
HDMIcablesareavailableasCategory1andCategory2
types.
Category 2 Cables• (alsocalledhigh-speedHDMI
cables).Newer,HDMI1.3-compliantDVDplayers,
videogames,andset-topboxesrequireCategory2
cables,suitableforclockfrequenciesupto340MHz
ordataratesofupto10.2gigabitspersecond.Use
category2cablesforhigh-speed1080pHDsignals
carryingextendedcolorencodings(i.e.,30ormore
bits,alsocalledDeepColor).Category2cablesare
alsosuitableforstandardHDTVsignals.
Category 1 Cables• (alsocalledstandardHDMI
cables).Category1cablesmaybeunmarked.They
aresuitableforstandardHDTV720p,1080i,and
1080psignalswith8-bitcolordepth.Usecategory1
cablesforclockfrequenciesupto74.25MHzordata
ratesofupto2.23gigabitspersecond.
2. TV Connections 19
Inputs and Outputs, continued
10. IR–NetCommand Output/External
Controller Input
153 and 249 Series.UseanIRemittercablewiththis
jacktosendcontrolsignalstoexternalIRremote-con-
trolleddevices.Alternatively,yourprofessionalinstaller
canusethisjackastheinputforanexternalcontroller.
ConnecttothisjackandwhentheNew Device Found
screenappears,selectoperationofthejackaseither
aninput(foranexternalcontroller)orasanoutput(for
NetCommandIRcontrol).Seepage56.
11. USB
TheTVcanreadJPEGphotofilesandmp3musicfiles
fromaUSBdevice.
12. RS-232C
249 Series.UsetheRS-232Cinterfacetoreceive
controlsignalsfromcompatiblehome-theatercontrol
devices.Seewww.mitsubishi-tv.comforalistof
controlsignalsforthisinterface.
13. LAN
249 Series.Usethe
LAN
Ethernetjackforstreaming
internetvideototheTV.Seepage37forsetup.Visit
www.VUDU.comfordetailsaboutVUDUservice.
14. USBa, USBb
249 Series.StandardUSB5-volt,500-milliamppower
outputsyoucanusetosupplypowertoanaccessory
device.ForusewiththeVUDUwirelessadapter,see
page37.
20 2. TV Connections
H
DMI Device
HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
Suitable for use with Sound Projector surround
sound
Required:HDMI-to-HDMIcable.
ConnectanHDMIcablefromtheTVbackpaneltothe
HDMIdeviceoutput.HDMIdevicesprovidevideoand
audiothroughthesinglecable.Thisconnectionsends
digitalsurroundsoundfromthesourcedevicetothe
TV’sspeakerarray.
Mitsubishirecommendsyouusecategory2(high-
speed)HDMIcablestoconnectHDMI1.3source
devices.High-speedcategory2cablesbringyouthe
fullbenefitsofDeepColorandx.v.Color.See“HDMI
CableCategories”onpage18formoreonHDMIcable
types.
AVR AUDIO OUTPUT
R
L
Pb YPr AUDIO OUT
VIDEO OUT LR
TV
Any device with
HDMI output
HDMI-to-HDMI
cable
Y Pb Pr Component Video Device
HDTV Cable Box, Satellite Receiver, DVD/
Blu-ray Player
Suitable for use with Sound Projector surround
sound.
IfyoursourcedevicehasanHDMIoutput,usethe
connectionsforHDMIdevicesdescribedonthispage
insteadofcomponentvideo.
Required:
1. RCA-typecomponentvideocables
2. Audiocable(s)
2a. Digitalaudiocable
or
2b. Left/rightanalogstereoaudiocables.
Note:
ToheardigitalsurroundsoundfromtheTV’s•
SoundProjectorspeakerarray,connectthedigital
audiooutputfromthedevicetotheTV’s
DIGITAL
AUDIO INPUT
jack.
Toheardigitalsurroundsoundfromanexternal•
soundsystem,connectthedigitalaudiooutput
fromthedevicedirectlytoyourdigitalA/Vreceiver
insteadoftheTV.
AVR AUDIO OUTPUT
R
L
Pb Pr
Y/ VIDEO
AUDIO
L
R
Pb YPr AUDIO OUT DIGITAL
AUDIO OUT
VIDEO OUT LR
Incoming from
cable service or
satellite dish
Any device with
component video
output
TV
1.
2a.
2b.
or
CABLE IN or
SATELLITE IN
/