HP Compaq nc6000 Notebook PC User guide

Type
User guide
Software Guide
HP Compaq Notebook Series
Document Part Number: 333634-001
August 2003
This guide provides settings and procedures for managing
notebook power and security. It also provides instructions for
obtaining system information and using setup utilities to help
detect, solve, and prevent problems.
333634-001.book Page i Friday, July 18, 2003 8:47 AM
© 2003 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are trademarks of Microsoft Corporation in the
U.S. and/or other countries. Intel and SpeedStep are trademarks of Intel
Corporation in the U.S. and/or other countries. SD Logo is a trademark.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Software Guide
HP Compaq Notebook Series
First Edition August 2003
Reference Number: nc6000
Document Part Number: 333634-001
333634-001.book Page ii Friday, July 18, 2003 8:47 AM
Software Guide iii
Contents
1 Setup
Setting Up the Software . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1
Installing Optional Software . . . . . . . . . . . . . . . . . . . 1–2
Selecting Regional Settings . . . . . . . . . . . . . . . . . . . . 1–3
Selecting Screen Settings. . . . . . . . . . . . . . . . . . . . . . 1–3
Setting Up Wireless LAN and Bluetooth . . . . . . . . . 1–4
Safeguarding the Notebook . . . . . . . . . . . . . . . . . . . . . . . 1–4
Turning Off the Notebook . . . . . . . . . . . . . . . . . . . . . 1–4
Protecting the Notebook from Power Surges . . . . . . 1–4
Protecting the Notebook Against Viruses . . . . . . . . . 1–5
2Power
Selecting a Power Source. . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Understanding Standby and Hibernation . . . . . . . . . . . . . 2–2
Standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
Hibernation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
Initiating Standby, Hibernation, or Shutdown . . . . . . . . . 2–4
When You Leave Your Work . . . . . . . . . . . . . . . . . . 2–4
When the Power Supply Is Uncertain . . . . . . . . . . . . 2–4
When Using Infrared Communication or Drive
Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5
Using the Default Power Settings . . . . . . . . . . . . . . . . . . 2–5
Turning the Notebook or Display On or Off . . . . . . . 2–6
Initiating or Resuming from Hibernation . . . . . . . . . 2–7
Initiating or Resuming from Standby . . . . . . . . . . . . 2–9
Using Emergency Shutdown Procedures . . . . . . . . 2–10
333634-001.book Page iii Friday, July 18, 2003 8:47 AM
iv Software Guide
Contents
Managing Power Options. . . . . . . . . . . . . . . . . . . . . . . . 2–10
Accessing the Power Options Window . . . . . . . . . . 2–11
Displaying the Power Meter Icon . . . . . . . . . . . . . . 2–11
Setting or Changing a Power Scheme . . . . . . . . . . . 2–11
Using a Security Password . . . . . . . . . . . . . . . . . . . 2–12
Processor Performance Controls . . . . . . . . . . . . . . . 2–12
Windows XP Processor Controls . . . . . . . . . . . . . . 2–16
3 Security
Security Features Quick Reference . . . . . . . . . . . . . . . . . 3–1
Setting Security Preferences in Computer Setup . . . . . . . 3–3
Using Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–3
Understanding HP and Windows Passwords. . . . . . . 3–4
HP and Windows Password Guidelines . . . . . . . . . . 3–5
Understanding Power-On Passwords. . . . . . . . . . . . . . . . 3–6
Setting Power-On Passwords. . . . . . . . . . . . . . . . . . . 3–7
Entering Power-On Passwords . . . . . . . . . . . . . . . . . 3–8
Understanding HP Administrator Passwords. . . . . . . . . . 3–8
Setting HP Administrator Passwords . . . . . . . . . . . . 3–9
Entering HP Administrator Passwords . . . . . . . . . . . 3–9
Understanding DriveLock . . . . . . . . . . . . . . . . . . . . . . . 3–10
Setting DriveLock Passwords . . . . . . . . . . . . . . . . . 3–11
Entering DriveLock Passwords . . . . . . . . . . . . . . . . 3–12
Changing DriveLock Passwords . . . . . . . . . . . . . . . 3–12
Removing DriveLock Protection. . . . . . . . . . . . . . . 3–13
Disabling a Device. . . . . . . . . . . . . . . . . . . . . . . . . . 3–14
Using HP ProtectTools Embedded Security Manager . . 3–15
Using System Information . . . . . . . . . . . . . . . . . . . . . . . 3–15
Setting System Information Options . . . . . . . . . . . . 3–16
Using the Smart Card Reader. . . . . . . . . . . . . . . . . . . . . 3–16
Safeguarding Your Smart Card Reader. . . . . . . . . . 3–17
333634-001.book Page iv Friday, July 18, 2003 8:47 AM
Contents
Software Guide v
4 Optical Drive Software
Using CDs and DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Protecting Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Observing the Copyright Warning . . . . . . . . . . . . . . 4–2
Playing Audio and Video CDs with Windows
Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Playing a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Accessing Windows Media Player Help . . . . . . . . . . 4–3
Playing Video CDs and DVDs with Intervideo
WinDVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3
Installing WinDVD . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3
Playing Video CDs and DVDs . . . . . . . . . . . . . . . . . 4–4
Changing DVD Region Settings . . . . . . . . . . . . . . . . 4–5
Creating CDs with Roxio Easy CD & DVD
Creator 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
Understanding Easy CD & DVD Creator 6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
Preparing to Use Easy CD & DVD Creator 6 . . . . . . 4–8
Formatting Recording Media. . . . . . . . . . . . . . . . . . . 4–9
Creating CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10
Erasing Recorded Media with Roxio Easy
CD & DVD Creator 6 . . . . . . . . . . . . . . . . . . . . . . . 4–10
Selecting Easy CD & DVD Creator 6 Settings . . . . 4–11
Creating DVDs Using InterVideo WinDVD Creator . . 4–13
Preparing to Use InterVideo WinDVD Creator . . . 4–13
Creating DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–14
5 Intelligent Manageability
Configuration and Deployment . . . . . . . . . . . . . . . . . . . . 5–2
Software Management and Updates. . . . . . . . . . . . . . . . . 5–3
HP Client Manager Software. . . . . . . . . . . . . . . . . . . 5–3
Altiris Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–4
Altiris PC Transplant Pro . . . . . . . . . . . . . . . . . . . . . 5–5
System Software Manager. . . . . . . . . . . . . . . . . . . . . 5–5
333634-001.book Page v Friday, July 18, 2003 8:47 AM
vi Software Guide
Contents
6 MultiBoot
Understanding the Default Boot Sequence . . . . . . . . . . . 6–2
Enabling Bootable Devices in Computer Setup. . . . . . . . 6–3
Understanding MultiBoot Results . . . . . . . . . . . . . . . 6–4
Setting MultiBoot Preferences. . . . . . . . . . . . . . . . . . 6–5
Setting a New Default Boot Sequence . . . . . . . . . . . 6–5
Setting a MultiBoot Express Prompt. . . . . . . . . . . . . 6–6
Entering MultiBoot Express Preferences . . . . . . . . . 6–6
7 Presentation Mode
Opening Quick Launch Button Software. . . . . . . . . . . . . 7–2
Changing Presentation Mode Settings. . . . . . . . . . . . 7–3
Using Presentation Mode . . . . . . . . . . . . . . . . . . . . . . . . . 7–4
8 Computer Setup
Using Computer Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–1
Accessing Computer Setup . . . . . . . . . . . . . . . . . . . . 8–2
Restoring Computer Setup Defaults . . . . . . . . . . . . . 8–2
Selecting from the File Menu . . . . . . . . . . . . . . . . . . 8–3
Selecting from the Security Menu. . . . . . . . . . . . . . . 8–4
Selecting from the Tools Menu . . . . . . . . . . . . . . . . . 8–5
Selecting from the Advanced Menu . . . . . . . . . . . . . 8–5
9 Software Updates and Restorations
Preparing to Update Software . . . . . . . . . . . . . . . . . . . . . 9–1
Obtaining the Support Software CD . . . . . . . . . . . . . 9–2
Accessing Notebook Information . . . . . . . . . . . . . . . 9–2
Downloading Software from the Internet . . . . . . . . . . . . 9–3
Downloading System ROM. . . . . . . . . . . . . . . . . . . . 9–4
Downloading Other Software . . . . . . . . . . . . . . . . . . 9–5
333634-001.book Page vi Friday, July 18, 2003 8:47 AM
Contents
Software Guide vii
System Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–5
Safeguarding Your Data . . . . . . . . . . . . . . . . . . . . . . 9–6
Setting System Restore Points
(Windows XP Only) . . . . . . . . . . . . . . . . . . . . . . . . . 9–6
Repairing the Operating System . . . . . . . . . . . . . . . . 9–7
Reinstalling the Operating System . . . . . . . . . . . . . . 9–7
Reinstalling Device Drivers and Other Software . . . 9–9
Index
333634-001.book Page vii Friday, July 18, 2003 8:47 AM
Software Guide 1–1
1
Setup
Setting Up the Software
A prompt to set up your software displays on the screen when the
notebook is turned on for the first time. Before responding to the
prompt and proceeding through the online instructions, read the
following caution and other installation information contained in
this chapter.
Ä
CAUTION: To prevent file corruption and to ensure that the correct device
drivers install, follow these guidelines during software setup:
Do not unplug the notebook from the electrical outlet.
Do not shut down the notebook.
Do not remove or insert a drive.
After you begin the software setup, you must complete the
entire process without interruption. Setup time varies.
If you are prompted to select a language, choose carefully.
The languages you do not choose are deleted from the system
and cannot be restored once the setup process has begun.
If you are prompted to accept the End User License
Agreement, you must choose Accept to continue the
software setup.
Preloaded software applications are included with the
notebook but must be installed through the Software Setup
utility. Preinstalled software applications have already been
installed on the notebook and require no further installation
procedures.
333634-001.book Page 1 Friday, July 18, 2003 8:47 AM
1–2 Software Guide
Setup
This guide does not take into account any variation that may
result from the notebook being connected to a network.
This guide documents the Windows 2000, Windows XP
Professional, and Windows XP Home operating systems.
Any other operating systems installed on this notebook after
purchase may not match the descriptions and procedures
provided in this guide.
This guide documents the category view that is used by
default in Windows XP. If your notebook is set to classic
view, you may notice discrepancies between your notebook
and this documentation. For information on switching views,
see Windows XP Help and Support.
Installing Optional Software
You can install third-party software or preloaded utilities any time
after initial setup is complete.
To install third-party software, refer to the documentation
included with the software.
To install a preloaded utility:
In Windows 2000, select Start > Programs > Software
Setup.
In Windows XP, select Start > All Programs > Software
Setup.
A setup wizard loads, and a list of applications is displayed.
Select the application you want to install, and follow the
instructions on the screen.
To view the descriptions and space requirements of preloaded HP
utilities without installing them:
In Windows 2000, select Start > Programs > Software
Setup.
In Windows XP, select Start > All Programs > Software
Setup.
After viewing the utility information, select Cancel.
333634-001.book Page 2 Friday, July 18, 2003 8:47 AM
Setup
Software Guide 1–3
Selecting Regional Settings
Keyboard language and other regional preferences such as time,
date, and currency format, are set in the operating system. To
access these settings:
In Windows 2000, select Start > Settings > Control Panel >
Date/Time, or select Start > Settings > Control Panel >
Regional Options.
In Windows XP, select Start > Control Panel > Date, Time,
Language, and Regional Options > Date and Time, or select
Start > Control Panel > Date, Time, Language, and Regional
Options > Regional and Language Options.
For information about selecting regional settings, open the
Regional Options window, then use context-sensitive Help. To
use context-sensitive Help, select the question mark button in
the upper right corner of the window, then select an item. A
definition, explanation, or procedure is displayed.
Selecting Screen Settings
If you would like to see more items on your screen or to see
the items on your screen displayed larger, change the screen
resolution setting in your operating system. To access the screen
resolution settings:
In Windows 2000, select Start > Settings > Control Panel >
Display > Settings tab.
In Windows XP, select Start > Control Panel > Appearance
and Themes > Display > Settings tab.
333634-001.book Page 3 Friday, July 18, 2003 8:47 AM
1–4 Software Guide
Setup
Setting Up Wireless LAN and Bluetooth
If your notebook is equipped with wireless LAN (WLAN) or
Bluetooth, you must configure these devices before using them.
For information on configuring and using your WLAN device,
refer to the Startup guide that shipped with your notebook. The
Startup guide contains information to help you set up your
WLAN and locate the correct documentation.
For information on configuring and using Bluetooth, refer to the
Documentation Library—Bluetooth CD included with your
notebook.
WLAN and Bluetooth options are not supported in all countries.
Safeguarding the Notebook
Turning Off the Notebook
Whenever possible, shut down the notebook by following the
appropriate Windows shutdown procedure:
In Windows 2000, select Start > Shut Down > Shut Down,
then select the OK button.
In Windows XP, select Start > Turn off computer > Turn off.
Protecting the Notebook from Power Surges
To protect the notebook from the power surges that may be
caused by an uncertain power supply or an electrical storm:
Plug the notebook power cord into an optional, high-quality
surge protector. Surge protectors are available from most
computer or electronics retailers.
Provide surge protection on the cable that connects a modem
to the telephone line.
Run the notebook on battery power or shut down the
notebook and disconnect the power cord. Surge protectors are
available from most computer or electronics retailers.
333634-001.book Page 4 Friday, July 18, 2003 8:47 AM
Setup
Software Guide 1–5
Protecting the Notebook Against Viruses
When you use the notebook for email, network, or Internet
access, you expose the notebook to computer viruses. Computer
viruses can disable the operating system, your applications, or
your utilities or cause them to function abnormally.
Antivirus software can detect most viruses, destroy them, and
repair damage they have caused. To provide protection against
newly discovered viruses, antivirus software must be installed
and updated periodically.
333634-001.book Page 5 Friday, July 18, 2003 8:47 AM
Software Guide 2–1
2
Power
Selecting a Power Source
The notebook can run on internal or external AC power. The
following table indicates the best power sources for common
tasks.
Task Recommended Power Source
Work in most software applications
Charged battery pack in the
notebook
External power supplied through
one of the following devices:
AC adapter
Optional Port Replicator
Optional Aircraft Adapter
Optional Automobile Power
Adapter/Charger
Charge or calibrate a battery pack in
the notebook
External power supplied through:
AC adapter
Optional Automobile Power
Adapter/Charger
Optional Port Replicator
Install or modify system software or
write to a CD
External power supplied through:
AC adapter
Optional Port Replicator
333634-001.book Page 1 Friday, July 18, 2003 8:47 AM
2–2 Software Guide
Power
Understanding Standby and
Hibernation
Standby and Hibernation are energy-saving features that conserve
power and reduce startup time. They can be initiated by you or
by the system. Refer in this chapter to the “Initiating Standby,
Hibernation, or Shutdown, section for details about when to use
each setting.
Standby
Standby reduces power to system components that are not in use.
When Standby is initiated, your work is saved in random access
memory (RAM) and the screen is cleared. When you resume
from Standby, your work returns to the screen where you left off.
Saving your work before initiating Standby is not usually
necessary, but is a recommended precaution.
When the notebook is in Standby, the power/Standby light
flashes.
Ä
CAUTION: To avoid a complete battery discharge, do not leave your
notebook in Standby for extended periods. Connect the notebook to an
external power source.
Hibernation
Hibernation saves your work to a Hibernation file on the hard
drive, then shuts down the notebook. When you resume from
Hibernation, your work returns to the screen where you left off. If
a power-on password has been set, the password must be entered
to resume from Hibernation.
You can disable Hibernation. However, if Hibernation is disabled,
and the system reaches a low-battery condition, the system will
not automatically save your work while power is on or Standby
has been initiated.
333634-001.book Page 2 Friday, July 18, 2003 8:47 AM
Power
Software Guide 2–3
In the Power Options window, Hibernation is not displayed as an
option if it has been disabled. You must enable Hibernation in
order to select it in the Power Options window. To verify that
Hibernation is enabled:
In Windows 2000, select Start > Settings > Control Panel >
Power Options icon > Hibernate tab. Make sure that the
Enable hibernate support check box is selected.
In Windows XP, select Start > Control Panel > Performance
and Maintenance > Power Options > Hibernate tab. Make
sure that the Enable hibernate support check box is selected.
Ä
CAUTION: If the configuration of the notebook is changed during
Hibernation, resuming from Hibernation may not be possible.When the
notebook is in Hibernation:
Do not dock or undock the notebook in a Port Replicator.
Do not add or remove memory modules.
Do not insert or remove any hard drives.
Do not connect or disconnect external devices.
Do not insert or remove a PC Card or a Secure Digital (SD) card.
333634-001.book Page 3 Friday, July 18, 2003 8:47 AM
2–4 Software Guide
Power
Initiating Standby, Hibernation, or
Shutdown
The following sections explain when to initiate Standby or
Hibernation and when to shut down your notebook.
When You Leave Your Work
Initiating Standby clears the screen and uses less power than
leaving the notebook on. Your work returns instantly to the screen
when you resume from Standby.
Initiating Hibernation clears the screen, saves your work to the
hard drive, and uses much less power than Standby.
Shutting down the notebook and removing the battery pack is
recommended to extend the life of the battery pack when the
notebook will be disconnected from external power for an
extended period. For details on battery pack storage, refer on
the Documentation Library CD to the Hardware Guide, “Battery
Packs” chapter.
When the Power Supply Is Uncertain
Make sure that Hibernation remains enabled, especially if you are
operating the notebook on battery power and do not have access
to an external power supply. If the battery pack fails, Hibernation
saves your work to a Hibernation file and shuts down the
notebook.
HP recommends that if you pause your work when the power
supply is uncertain, initiate Hibernation, shut down the notebook,
or save your work and then initiate Standby.
333634-001.book Page 4 Friday, July 18, 2003 8:47 AM
Power
Software Guide 2–5
When Using Infrared Communication or
Drive Media
Standby and Hibernation interfere with the use of infrared
communication and drive media. Note the following guidelines:
If the notebook is in Standby or Hibernation, you cannot
initiate an infrared transmission.
If Standby or Hibernation is accidentally initiated while a
drive medium (such as a diskette, CD, or DVD) is in use:
Your playback may be interrupted.
You may see a warning message: “Putting the computer
into Hibernation or Standby may stop the playback. Do
you want to continue?” Select No.
You may need to restart the playback to resume audio and
video.
Ä
CAUTION: Do not initiate Standby or Hibernation while using drive
media. Doing so may result in possible video and audio degradation
and loss of audio or video playback functionality.
Using the Default Power Settings
The following tables describe the factory power settings on the
notebook. You can change many of these settings according to
your preference. For more information on changing power
settings, refer in this chapter to “Managing Power Options.
333634-001.book Page 5 Friday, July 18, 2003 8:47 AM
2–6 Software Guide
Power
Turning the Notebook or Display On or Off
Task Procedure Result
Tu r n o n t h e
notebook
Press the power button.
Pressing the power
button returns the
notebook to “on” from
Standby, Hibernation,
or shutdown.
The power/Standby
light turns on.
The operating
system loads.
Shut down the
notebook*
Save your work and close all
open applications. Then:
Press the power button
and follow the on screen
directions (if displayed)
for shutting down the
notebook.
Shut down the notebook
through the operating
system:
In Windows 2000,
select Start > Shut
Down > Shut Down,
then select the OK
button.
In Windows XP, select
Start > Turn Off
Computer > Turn Off.
The power/Standby
light turns off.
The operating
system shuts
down.
The notebook
turns off.
Turn off the
display while the
power is on
Close the notebook. Closing the notebook
activates the display
switch, which turns off
the display. This
conserves battery
power.
* If the system is unresponsive and you are unable to shut down the notebook
with these procedures, refer in this chapter to “Using Emergency Shutdown
Procedures.
333634-001.book Page 6 Friday, July 18, 2003 8:47 AM
Power
Software Guide 2–7
Initiating or Resuming from Hibernation
Task Procedure Result
Initiate
Hibernation
In Windows 2000, select
Start > Shut down >
Hibernate, then select the
OK button.
In Windows XP, select
Start > Turn Off Computer
> Hibernate. (If the
Hibernate option is not
displayed, press and
hold the shift key.)
If Hibernation has been
configured, briefly press
the power button.
The power/Standby
light turns off.
The screen clears.
Allow the system
to initiate
Hibernation
(with
Hibernation
enabled)
No action required.
If the notebook is running
on battery power, the
system initiates
Hibernation after 30
minutes of notebook
inactivity or when the
battery pack(s) reaches
a critical low battery
condition.
If the notebook is attached
to external power, the
system will not initiate
Hibernation.
Power settings and
timeouts can be changed
in the Power Options
window.
The power/Standby
light turns off.
The screen clears.
(Continued)
333634-001.book Page 7 Friday, July 18, 2003 8:47 AM
2–8 Software Guide
Power
Resume from
user-initiated or
system-initiated
Hibernation
Press the power button.
If the system initiated
Hibernation because
of a critical low-battery
condition, connect
external power or
insert a charged
battery pack before
you press the power
button.
The power/Standby
light turns on.
Your work returns
to the screen.
Task Procedure Result
333634-001.book Page 8 Friday, July 18, 2003 8:47 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94

HP Compaq nc6000 Notebook PC User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI