H0044

Anmytek H0044, Stockholm Media Console Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Anmytek H0044 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ASSEMBLY AND CARE GUIDE
2 x 1 m
FLOOR SPACE REQUIRED
2 PEOPLE
REQUIRED FOR ASSEMBLY
1 HOUR
ASSEMBLY TIME
Stockholm Media Console
TV Stand with Doors
Item No.: H0044
Contact Us: [email protected]
Contact Us: [email protected]
1
SAFETY PRECAUTIONS
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
WA RNING : ENSURE THE WA LL STRA P IS AT TACHED TO
AVOID SERIOUS INJURY .
To avoid any serious or fatal injury, this product has beened with a wall strap to
prevent toppling. We strongly recommend that this product is permanently fixed to the
wall or other suitable surface. Fixing devices are not included since dierent surface
materials require dierent aachments. Please seek professional advice
if you are in doubt of what fixing device to use.
Do not stand on the product. Do not climb on the product. Do not swing on the product.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT.
1.
Please check that all parts are present
before
you start the assembly of your furniture.
A
Philips
head
screwdriver
(not included)
is required
for the assembled
of thisproduct.
2. For ease and
speed of assembly, we recommend that before you commence each step
of the assembly, that you idenfy all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people to assemble your
product safely.
4. We recommend that, where possible, all items are assembled near to the area in which they
will be placed in use, to avoid moving the product unnecessarily once assembled.
5. For the protecon of your furniture, we recommend that the product is placed on a
protected surface during assembly to prevent any damage.
6. During assembly,
Do
n ot
ti ghten
b olts
/ sc rews
completely
u ntil
al l
b olts
/ sc rews
are
lined
up
and
inserted
into
holes,
Do
not
over
tighten
screws
and
bolts
to
avoid
stripping,
Do
not
use
power
tools
7. Always place the product on a flat, steady and stable surface.
8. Do not stand on the product. Do not use the product as a stepladder.
9. This product is intended for indoor, household
use only as it is a non industrial product.
CARE AND CLEANING
Please periodically
check all fings and re-ghten as necessary.
• To clean your item, please use a damp cloth and wipe clean.
• Never allow any kind of liquid to remain on your furniture. If liquid spills onto the
product, please wipe clean as soon as possible.
Item No.: H0044
Contact Us: [email protected]
Contact Us: [email protected]
2
ASSEMBLY DIAGRAM
AFTER SALES SUPPORT
If you have any general enquiries or require spare parts for this product, please
feel free to
contact us via the following email:
Email:
You
can
contact
us
for
support
at
any
time.
We'll
answer
you
in
24hrs.
Item No.: H0044
Contact Us: [email protected]
Contact Us: [email protected]
3
Item No.: H0044
Contact Us: [email protected]
Contact Us: [email protected]
4
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O 3.5x45mm
O3x14mm
O 3x10mm
O6x35mm
O 3.5x35mm
O 3.5x45mm
Cam Bolt
Cam Lock
Wooden Dowel
Screw
Handle
Screw
Screw
Screw
Screw
Cabinet Swing Hinge
Bolt
Allen key
Magnetic Door Catch
Metal Sheet
14 PCS
14 PCS
20 PCS
6 PCS
2 PCS
6 PCS
3 PCS
4 PCS
2 PCS
1 PCS
1 PCS
2 PCS
2 PCS
4 PCS
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
ASSEMBLY STEPS
Item No.: H0044
Contact Us: [email protected]
Contact Us: [email protected]
5
STEP 1.
FF
L
EK
M
E
LF F
B
A
C
STEP 2.
Attach the magnetic door hinge (K) to the top panel (8) using 2 x screws (M).
Attach 2 x metal sheets (L), 2 x door handles (E) to panels (10), (11) using 6 x screws (F) with a
screwdriver.
Attach middle shelves (2), (4) to side panels (1), (3), (5) using 8 x wooden dowels (C), 8 x cam bolts
(A), 8 x cam locks (B). Tighten with a screwdriver.
ASSEMBLY STEPS
Item No.: H0044
Contact Us: [email protected]
Contact Us: [email protected]
6
B
AC
STEP 3.
STEP 4.
Slide back side panels (6), (7) into grooves.
Attach the top panel (8) to assembled unit using 6 x wooden dowels (C), 6 x cam bolts (A), 6 x cam
locks (B). Tighten with a screwdriver.
ASSEMBLY STEPS
Item No.: H0044
Contact Us: [email protected]
Contact Us: [email protected]
7
C
H
H
H
H
D
STEP 5.
STEP 6.
Put the upside down to slide back side panels (6), (7) into position.
Attach the door panel (10), (11) to assembled unit using 4 x cabinet swing hinges (H).
Attach the bottom panel (9) to assembled unit using 6 x screws (D) with a screwdriver.
ASSEMBLY STEPS
Item No.: H0044
Contact Us: [email protected]
Contact Us: [email protected]
8
G
I
N
J
J
STEP 7.
STEP 8.
Fix 2 x metal legs (12) to metal part (13) using 2 x bolts (I) with an Allen key (I).
Attach the assembled metal leg to the cabinet using 4 x screws (N), 3 x screws (G).
N
Final assembly.
/