Anmytek H0044 Installation guide

ASSEMBLY AND CARE GUIDE

2 x 1 m

FLOOR SPACE REQUIRED

2 PEOPLE

REQUIRED FOR ASSEMBLY

1 HOUR

ASSEMBLY TIME

Stockholm Media Console

TV Stand with Doors

Item No.: H0044

Contact Us: [email protected]

1

SAFETY PRECAUTIONS

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

WA RNING : ENSURE THE WA LL STRA P IS AT TACHED TO

AVOID SERIOUS INJURY .

To avoid any serious or fatal injury, this product has been ﬁed with a wall strap to

prevent toppling. We strongly recommend that this product is permanently ﬁxed to the

wall or other suitable surface. Fixing devices are not included since diﬀerent surface

materials require diﬀerent aachments. Please seek professional advice

if you are in doubt of what ﬁxing device to use.

Do not stand on the product. Do not climb on the product. Do not swing on the product.

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING AND USING THE PRODUCT.

1.

Please check that all parts are present

before

you start the assembly of your furniture.

A

Philips

head

screwdriver

(not included)

is required

for the assembled

of thisproduct.

2. For ease and

speed of assembly, we recommend that before you commence each step

of the assembly, that you idenfy all the parts required for that step.

3. For larger items, please ensure that you have suﬃcient space and people to assemble your

product safely.

4. We recommend that, where possible, all items are assembled near to the area in which they

will be placed in use, to avoid moving the product unnecessarily once assembled.

5. For the protecon of your furniture, we recommend that the product is placed on a

protected surface during assembly to prevent any damage.

6. During assembly,

Do

n ot

ti ghten

b olts

/ sc rews

completely

u ntil

al l

b olts

/ sc rews

are

lined

up

and

inserted

into

holes,

Do

not

over

tighten

screws

and

bolts

to

avoid

stripping,

Do

not

use

power

tools

7. Always place the product on a ﬂat, steady and stable surface.

8. Do not stand on the product. Do not use the product as a stepladder.

9. This product is intended for indoor, household

use only as it is a non industrial product.

CARE AND CLEANING

• Please periodically

check all ﬁngs and re-ghten as necessary.

• To clean your item, please use a damp cloth and wipe clean.

• Never allow any kind of liquid to remain on your furniture. If liquid spills onto the

product, please wipe clean as soon as possible.

Item No.: H0044

Contact Us: [email protected]

2

ASSEMBLY DIAGRAM

AFTER SALES SUPPORT

If you have any general enquiries or require spare parts for this product, please

feel free to

contact us via the following email:

Email:

[email protected]

You

can

contact

us

for

support

at

any

time.

We'll

answer

you

in

24hrs.

Item No.: H0044

Contact Us: [email protected]

3

⑨

⑫

⑬

①②

③

④

⑤

⑥

⑦

⑧

⑩

⑪

Item No.: H0044

Contact Us: [email protected]

4

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O 3.5x45mm

O3x14mm

O 3x10mm

O6x35mm

O 3.5x35mm

O 3.5x45mm

Cam Bolt

Cam Lock

Wooden Dowel

Screw

Handle

Screw

Cabinet Swing Hinge

Bolt

Allen key

Magnetic Door Catch

Metal Sheet

14 PCS

20 PCS

6 PCS

2 PCS

6 PCS

3 PCS

4 PCS

2 PCS

1 PCS

2 PCS

4 PCS

The hardware quantities listed above are required for proper assembly.

Some extra hardware may also have been included.

Philips head screwdriver required for assembly

(not included)

ASSEMBLY STEPS

Item No.: H0044

Contact Us: [email protected]

5

STEP 1.

FF

L

EK

M

E

LF F

①

②③

④

⑤

B

A

C

STEP 2.

⑩⑪

⑧

Attach the magnetic door hinge (K) to the top panel (8) using 2 x screws (M).

Attach 2 x metal sheets (L), 2 x door handles (E) to panels (10), (11) using 6 x screws (F) with a

screwdriver.

Attach middle shelves (2), (4) to side panels (1), (3), (5) using 8 x wooden dowels (C), 8 x cam bolts

(A), 8 x cam locks (B). Tighten with a screwdriver.

ASSEMBLY STEPS

Item No.: H0044

Contact Us: [email protected]

6

①

⑤

⑥

⑦

①

⑤

⑧

B

AC

STEP 3.

STEP 4.

Slide back side panels (6), (7) into grooves.

Attach the top panel (8) to assembled unit using 6 x wooden dowels (C), 6 x cam bolts (A), 6 x cam

locks (B). Tighten with a screwdriver.

ASSEMBLY STEPS

Item No.: H0044

Contact Us: [email protected]

7

①

⑤⑥

⑦

⑨

①

⑤

⑩

⑪

C

H

D

STEP 5.

STEP 6.

Put the upside down to slide back side panels (6), (7) into position.

Attach the door panel (10), (11) to assembled unit using 4 x cabinet swing hinges (H).

Attach the bottom panel (9) to assembled unit using 6 x screws (D) with a screwdriver.

ASSEMBLY STEPS

Item No.: H0044

Contact Us: [email protected]

8

⑫

⑬

G

I

N

J

STEP 7.

STEP 8.

Fix 2 x metal legs (12) to metal part (13) using 2 x bolts (I) with an Allen key (I).

Attach the assembled metal leg to the cabinet using 4 x screws (N), 3 x screws (G).

N

Final assembly.

Anmytek H0044 Installation guide

This manual is also suitable for

Anmytek H0044 Installation guide

Related papers

Other documents