2. Jabra
  3. Engage 55
Engage 55

Jabra Engage 55 User manual

  • Hello, I have reviewed the user manual for the Jabra Engage 55 - USB-A MS Stereo with Charging Stand. This document provides instructions on how to manually pair the headset with the Jabra Link 400 adapter. I am ready to assist you with any questions you may have about this process or the device.
  • How to turn off the headset?
    How to make headset ready to pair?
    How to start pairing on the Jabra Link 400 DECT adapter?
Jabra Engage 55 - USB-A MS Stereo with
Charging Stand
How do I manually pair a headset with the Jabra Link 400?
To manually pair a headset with the Jabra Link 400, follow these steps.
1. Ensure the headset is turned off. To turn off the headset, press and
hold (4 seconds) the Call button.
2. Press and hold (4 seconds) the Call button until the LED flashes blue
and you hear a tone. The headset is now ready to pair.
3. Press and hold the button on the Jabra Link 400 DECT adapter until
the LED turns solid blue. It may take up to 20 seconds for the pairing to
complete.
19/10/2022 09:07
https://www.jabra.com/supportpages/jabra-engage-55/9559-455-125/faq/661a3222-
cb5a-4c73-b509-7a94441a8e4b
Page 1 of 1
/