Link 400a

Jabra Link 400a User manual

  • I have reviewed the user manual for the Jabra Link 400a headset and Link 400 DECT adapter. This document describes how to manually pair a headset to the DECT adapter using the call button and LED indicators. I'm ready to answer any questions you may have about the pairing process or other related information in the user manual.
  • How do I turn off the headset?
    How do I prepare the headset for pairing?
    How do I start pairing on the Jabra Link 400 DECT adapter?
Jabra Link 400a USB-A, DECT, MS, EMEA/APAC
How do I manually pair a headset with the Jabra Link 400?
To manually pair a headset with the Jabra Link 400, follow these steps.
1. Ensure the headset is turned off. To turn off the headset, press and
hold (4 seconds) the Call button.
2. Press and hold (4 seconds) the Call button until the LED flashes blue
and you hear a tone. The headset is now ready to pair.
3. Press and hold the button on the Jabra Link 400 DECT adapter until
the LED turns solid blue. It may take up to 20 seconds for the pairing to
complete.
18/11/2022 23:59
https://www.jabra.com.au/supportpages/jabra-link-400/14205-21/faq/661a3222-cb5a-
4c73-b509-7a94441a8e4b
Page 1 of 1
/