Choise Select CHO4005 User manual

Brand
Choise Select
Model
CHO4005
Type
User manual
Automatic Component Video
and Audio Switcher
4 inputs / 1 output
OPERATION
This CHOICE SELECT HDTV 4-way Audio Switcher is ideal for connecting DVD players,
Cable boxes, Game consoles, Camcorders, VCRs etc. to one monitor, such as HDTV
Display, Television or other device, without switching cables. (Note: This device does
not transcode, that is, the format of the input device must match the format of the output
device. For example, input signal from a YPbPR device cannot be output to a YCbCr
device.)
Please read this manual carefully and retain it for future reference.
FEATURES
• 4 Inputs / 1 Output
4 Component Video Inputs
4 S-Video Inputs
4 Composite Video Inputs
4 Stereo Audio Inputs
• Manual or Automatic Operating Mode
• 115VAC Power Adapter Included
• Channel Separation: 40dB (at 10MHz)
• Video Bandwidth: 30MHz
• Compatible with Progressive Scan
YPbPr 480p, 576p, 720p and 1080i
• Compatible with Interlaced Scan
YCbCr Component Video
• Dimensions: 10" W x 2" H x 6" D
PACKAGE CONTENTS
(1) CHO4005 Switcher
(1) 115VAC Power Adapter
ILLUSTRATION
Front panel
Rear Panel
CONNECTION ILLUSTRATION
DVD/Recorder
XBOXTM
TV/Plasma/LCD
Display
Home Theater Satellite Receiver
OPERATION
Connection:
Step 1. Connect the Component video cable (or S-Video or Composite Video) and Audio
R/L cable to the outputs of your video devices and the inputs of the CHO4005.
(NOTE: Cables and inputs are color-coded. Be sure to attach the cables to the
proper color input, or distortion and/or loss of signal will occur.)
Step 2: Connect the CHO4005 output to the input of your Big Screen Display or TV,
using the appropriate cable. Use an audio R/L cable to connect the audio
output of the CHO4005 to the input your amplifier or television.
Step 3: Connect the barrel end of the AC-DC Adaptor to the DC input of the CHO4005
and plug the AC end into an AC Outlet. Please note: use only supplied AC
adaptor.
Mode Selection:
AUTO
When you power on the CHO4005, the "AUTO" LED on the front panel will light up,
indicating the device is in "automatic sensing" mode. When in "AUTO" mode, the device
will scan all four inputs, and route the last input found to the CHO4005 output.
MANUAL
You can switch to "MANUAL" mode by pressing the "MODE" button once. The LED on
the front panel will turn off, indicating that the device is now in "MANUAL" mode. You
can toggle through the (4) inputs by pressing the "SELECT" button until the desired input
is reached, indicated by the LED's on the front panels (IN1, IN2, IN3 or IN4).
  • Page 1 1
  • Page 2 2
  • Page 3 3

Choise Select CHO4005 User manual

Brand
Choise Select
Model
CHO4005
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents