Kramer Electronics VP-747 User manual

Brand: Kramer Electronics

Model: VP-747

Category: Video switches

Type: User manual

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VP-747

Universal Presentation Matrix

Switcher / Scaler

P/N: 2900-000563 Rev 3

VP-747 – Contents i

Contents

1 Introduction 1

2 Getting Started 2

2.1 Achieving the Best Performance 2

3 Overview 3

3.1 About HDMI 6

3.2 Defining the VP-747 Switcher Scaler 7

4 Installing in a Rack 11

5 Connecting the VP-747 12

5.1 Connecting Different Source Types 14

5.2 Connecting the Outputs 15

6 Connecting the VP-747 Control Ports 16

6.1 Connecting to the VP-747 via RS-232 16

6.2 Connecting the Audio Control Port 17

6.3 Connecting the VP-747 to the Kramer VP-747T 18

6.4 Connecting the VP-747 via the Ethernet port 20

7 Understanding the VP-747 21

7.1 Understanding the UNIVERSAL Inputs 21

7.2 Understanding the PREVIEW/PROGRAM Outputs 21

7.3 Switching/Scaling of an Input 24

7.4 Understanding the PIP Button Feature 24

7.5 Locking and Unlocking the Front Panel 26

8 Operating the VP-747 27

8.1 Operating via the OSD MENU Screen 27

8.2 Operating via the Front Panel LCD Display 39

8.3 Operating via the Infrared Remote Control Transmitter 39

8.4 Operating via the Ethernet 41

9 Technical Specifications 43

9.1 Default Communication Parameters 43

10 VP-747 Communication Protocol 44

Figures

UFigure 1: VP-747 Universal Presentation Matrix Switcher / Scaler Front PanelU 7

UFigure 2: VP-747 Universal Presentation Matrix Switcher / Scaler Rear PanelU 9

UFigure 3: Connecting to the VP-747U 13

UFigure 4: Example for Connecting the INPUTSU 14

UFigure 5: Connecting the PREVIEW OUT/PROGRAM OUT ConnectorsU 15

UFigure 6: Crossed Cable RS-232 ConnectionU 16

UFigure 7: Straight Cable RS-232 Connection with a Null Modem AdapterU 17

UFigure 8: Connecting the VP-727A to the VP-747U 18

UFigure 9: Connecting the VP-747 to the VP-747TU 19

UFigure 10: PREVIEW and PROGRAM Output ExampleU 23

UFigure 11: Menu Screen IconsU 27

UFigure 12: Preview and Program Setting OSD MenusU 28

UFigure 13: Input Mode Setting ScreenU 31

UFigure 14: Output Mode Setting ScreenU 32

UFigure 15: Transition ScreenU 33

ii VP-747 - Contents

Figure 16: Audio Screen 34

Figure 17: Utility Screen

Figure 18: Info Screen

Figure 19: Example of how to use the LCD Display

Figure 20: Remote Transmitter

Figure 21: VP-747 Control Application Screen

VP-747 - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix

Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;

GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;

GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and

GROUP 11: Sierra Products.

Congratulations on purchasing your Kramer VP-747 Universal Presentation Matrix

Switcher / Scaler. The VP-747

is a true multi-standard video to graphics scaler and

seamless switcher with eight universal inputs comprised of five BNC connectors

each of which can accommodate a composite video, s-Video (Y/C), component

video (RGB/YUV), RGBS, or RGBHV signal. Input 1 and input 2 also accommodate

DVI/HDMI inputs. (The HDMI connector connects to a DVD source via the Kramer

ADC DM/HF adapter). It has dual scalers, one for the preview and the other for the

program output. Dual scalers are required to do "live" seamless transitions from one

source to another. It is ideal for these typical applications:

• Presentation applications that require a preview option

• Projection systems in conference rooms, board rooms, auditoriums, hotels,

and churches

• Presentations requiring seamless switching between inputs, using special

effects, cuts and fades

2 VP-747 - Getting Started

2 Getting Started

We recommend that you:

• Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

• Review the contents of this user manual

• Use Kramer high performance high resolution cables

• Use only the power cord that is supplied with this machine

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

• Use only good quality connection cables to avoid interference, deterioration

in signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

• Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

• Position your Kramer VP-747 away from moisture, excessive sunlight and

dust

VP-747 - Overview 3

3 Overview

The VP-747 Universal Presentation Matrix Switcher/Scaler is a true multi-standard

video to graphics scaler and presentation switcher for a wide variety of

presentation and multimedia applications. It consists of a very high quality scaler

with many user-selectable graphics or HDTV output resolutions, as well as a user-

definable output mode (recommended for advanced users only – non-standard

settings may not be recognized by the display device).

The VP-727A Audio Switcher and VP-727A-BA Balanced Audio Switcher are

audio companion switchers for the VP-747, and either can operate in conjunction

with it and the VP-747T Presentation Switcher Control Panel and also with the

VP-727T.

In particular, the VP-747 features:

• Silicon Optix HQV® Video Processing (Hollywood Quality Video) which

represents the state-of-the-art in video processing technology, with the

highest quality de-interlacing, noise reduction, and scaling performance for

both standard-definition and high-definition signals

• Eight sets of universal INPUT BNC connectors: R/P

R, G/Y/CV, B/PB/C,

S/CS, and VS. Each set can be programmed to operate as: composite

video, s-Video, component video, RGsB/YUV, RGBS, or RGBHV

Sometimes called YUV, or Y, B-Y, R-Y, or Y, Pb, Pr. The component input type (HDTV

or YCbCr) may be set as HD or SD.

• Two DVI/HDMI inputs (the HDMI connector connects to a DVD source via the

Kramer ADC DM/HF adapter) (for input 1 and input 2) that support up to

1.65Gbps bandwidth per graphic channel (suitable for resolutions up to

UXGA at 60Hz, and for all HD resolutions)

• HDTV compatibility and HDCP compliance

The HDCP (High Definition Content Protection) license agreement allows copy-

protected data on the HDMI input to pass to the HDMI output only.

• Scaling of selected sources to DVI/HDMI, RGBHV (Y, Pb, Pr) and VGA

outputs simultaneously

4 VP-747 - Overview

• Dual scalers—for “live” seamless transitions from one source to another—

with two independent outputs: a PREVIEW OUT and a PROGRAM OUT

(see

Section 7.2

The PREVIEW output—including an OSD menu for making adjustments—is for

determining how the scaled output looks before displaying live during a presentation, as

well as for setting the special effects that harmonize the transition when changing

between sources.

Both outputs have separate sets of connectors for DVI/HDMI, VGA (a 15-pin HD

computer graphics video connector), and RGBHV/YPbPr (on BNC connectors)

• Eight PREVIEW input buttons for switching a selected input to the PREVIEW

output and eight PROGRAM input buttons for switching a selected input to

the PROGRAM output

• Two transition modes (accessible via the OSD): the Swap mode and the

Follow mode. When pressing the TAKE button in the Swap mode, the

preview and program inputs switch positions; when pressing in the Follow

mode, the program input follows the preview input

• Scaling and zooming (to up to 400% of the original size)

• High quality de-interlacing 3:2/2:2 pull down

• The frame-rate of a converted movie (24 frames per second) to video

frequencies (25 frames per second (PAL); 30 frames per second (NTSC)

• K-IIT XL™ Picture-in-Picture Image Insertion Technology with ultra stable

picture-in-picture, picture-and-picture, and split screen capability for both the

PREVIEW and the PROGRAM outputs. Any video source can be inserted

into or positioned next to a computer graphics video source or vice versa

with window positioning and sizing controls

• Saving of all settings in non-volatile memory in the unit

• Support for firmware upgrade via USB

• A sophisticated front panel lockout (see

Section 7.5

• A Take button for executing preview to program switching (with transition

effects, which include cuts, fades, and wipes The direction of the wipe may

be selected by the user. The speed of each transition can be adjusted)

)

• ProcAmp controls for both outputs (processing amplification enables

adjustment of different video and audio signal parameters)

• Multi-standard video support: PAL, SECAM, and NTSC (3.58/4.43)

VP-747 - Overview 5

• A built-in Time Base Corrector (TBC) that stabilizes video sources with

unstable sync

• Multiple color space, outputting RGB or YUV

• Support for embedded audio on the HDMI inputs and outputs

The embedded audio feature is not available for the RGB resolutions 1920x1200 and

1920x1080. (It

• Digital reprocessing of the signal to correct mastering errors, and

regenerates the video at a chosen line and pixel rate format, providing, for

example, native-resolution video for LCD, DLP and Plasma displays

available for 1080p)

• Scaling of graphics resolutions to other resolutions

• A unique graphics-scaling engine with image enhancement algorithms, which

are built into the firmware

• A special design to improve video quality by reducing chroma and temporal

noise

• Reduced digital artifacts such as mosquito and block noise

• T-bar emulation via RS-232

• A rugged, professional 19" 3U rack-mountable metal enclosure

• A universal 100-240V AC automatic power supply, and rear panel power

switch

Control the VP-747 via the:

• Front panel and a user-friendly menu-driven OSD (see

Section 8.1

• High contrast LCD Display (see

)

Section 8.2

• IR remote control transmitter (see

)

Section 8.3

• Ethernet/RS-232 (see

)

Section 8.4

• Kramer VP-747T Presentation Switcher Control Panel

)

See the separate user manual on our Web site at

http://www.kramerelectronics.com.

6 VP-747 - Overview

3.1 About HDMI

High-Definition Multimedia Interface (HDMI) is an uncompressed all-digital

audio/video interface, widely supported in the entertainment and home cinema

industry. HDMI ensures an all-digital rendering of video without the losses associated

with analog interfaces and their unnecessary digital-to-analog conversions. It delivers

the maximum high-definition image and sound quality in use today. Note that Kramer

Electronics Limited is an HDMI Adopter and an HDCP Licensee.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered

trademarks of HDMI licensing LLC.

In particular, HDMI:

• Provides a simple interface between any audio/video source, such as a set-

top box, DVD player, or A/V receiver and video monitor, such as a digital flat

LCD/plasma television (DTV), over a single lengthy cable

SIMPLICITY - With video and multi-channel audio combined into a single cable, the

cost, complexity, and confusion of multiple cables currently used in A/V systems is

reduced

LENGTHY CABLE - HDMI technology has been designed to use standard copper

cable construction at up to 15m

• Supports standard, enhanced, high-definition video, and multi-channel digital

audio on a single cable

MULTI-CHANNEL DIGITAL AUDIO - HDMI supports multiple audio formats, from

standard stereo to multi-channel surround-sound. HDMI has the capacity to support

Dolby 5.1 audio and high-resolution audio formats

• Transmits all ATSC HDTV standards and supports 8-channel digital audio,

with bandwidth to spare to accommodate future enhancements and

requirements

• Benefits consumers by providing superior, uncompressed digital video

quality via a single cable, and user-friendly connector

HDMI provides the quality and functionality of a digital interface while also supporting

uncompressed video formats in a simple, cost-effective manner

• Is backward-compatible with DVI (Digital Visual Interface)

• Supports two-way communication between the video source (such as a DVD

player) and the digital television, enabling new functionality such as

automatic configuration and one-button play

• Has the capacity to support existing high-definition video formats (720p,

1080i, and 1080p/60), standard definition formats such as NTSC or PAL, as

well as 480p and 576p

VP-747 - Overview 7

3.2 Defining the VP-747 Switcher Scaler

This section defines the VP-747.

Figure 1: VP-747 Universal Presentation Matrix Switcher / Scaler Front Panel

8 VP-747 - Overview

# Feature Function

1 IR Receiver/LED Green when ON; red when OFF

OFF in this case means that the outputs and the front-panel are disabled

PREVIEW

Buttons

INPUTS Selects the video source (from 1 to 8) for the Preview output

From the five BNC (universal) inputs for each of the inputs. The INPUT

buttons 1 and 2 can also select the DVI/HDMI sources

3 PIP Toggles the picture-in-picture function on and off on the Preview output

4 BLANK Toggles between a blank screen and the selected input on the preview

output

5 FREEZE Freezes the output video image (toggle) on the Preview output

PROGRAM

Buttons

INPUTS Selects the video source (from 1 to 8) for the Program output

7 FREEZE Freezes the output video image (toggle) on the Program output

8 BLANK Toggles between a blank screen and the selected input on the Program

output

9 PIP Toggles the picture-in-picture function on and off on the Program output

10 TAKE Button Pressing TAKE causes the transition to occur

The effect is only seen in PROGRAM Mode. The PREVIEW screen

blanks during the transition

11 FADE Button Selects a dissolved transition from the PREVIEW output to the

PROGRAM output

TRANSITION Buttons

Selects a WIPE transition effect

To choose the direction from where the effect starts: “left to right”, “right to left”, “up” or

“down”, see

Section 8.1.3

Selects a SQUARE transition effect

Selects a CHESSBOARD transition effect

Selects a DIAGONAL transition effect

To choose the direction from where the effect starts: “top left”, “bottom left”, “top right”

or “bottom right”, see

Section 8.1.3

Selects a CIRCLE transition effect

To choose the direction of the effect: “in” or “out”, see

Section 8.1.3

Selects a CORNER transition effect

18 CUT Button Selects an instantaneous transition from the PREVIEW output to the

PROGRAM output

Only for setting up the unit for the effect. The effect only occurs when the Take button

is pressed

19 OSD Button Activates/deactivates access to the OSD Menu on the Preview output

NAVIGATION

Buttons

Toggles within each level 2 command/increases the range by one step

Moves up one step (in the same level) in the OSD menu

Moves down one step (in the same level) in the OSD menu

Toggles within each level 2 command/decreases the range by one step

24 ENTER Button Moves to the next level in the OSD menu

25 MENU Button Displays the OSD Menu screen (or moves to the previous level in the

OSD menu)

26 LCD STATUS

Display

Displays the status of the unit, and is used for menu navigation

27 PANEL LOCK

Button

Locks/unlocks the front panel

Press and hold for about 2 seconds to toggle

VP-747 - Overview 9

Figure 2: VP-747 Universal Presentation Matrix Switcher / Scaler Rear Panel

10 VP-747 - Overview

# Feature Function

1 PROGRAM OUT B/PB BNC Connector Connects to the PROGRAM display device

(component video or RGB or RGBHV acceptor)

Sometimes called YUV; Y, B-Y, R-Y; Y, Pb, Pr; or Y,

Cb, Cr

2 G/Y BNC Connector

3 R/PR BNC Connector

4 VS BNC Connector

5 Hs/Cs BNC Connector

6 PREVIEW

OUT Connectors

R/PR BNC Connector Connects to the PREVIEW display device

(component video or RGB or RGBHV acceptor)

7 G/Y BNC Connector

8 B/PB BNC Connector

9 Hs/Cs BNC Connector

10 Vs BNC Connector

11 POWER Switch Illuminated switch for turning the unit ON or OFF

12 Power Connector with FUSE AC connector enabling power supply to the unit

13 RS-232 9-pin D-sub Connector Connects to PC or Serial Controller

14 TO AUDIO UNIT

Port

Connects to the Kramer VP-727A Audio Switcher (optional). Pins B (-) and A

(+) are for RS-485; pin G may be connected to the Ground or the shield if desired;

15 Ethernet Port Connects to your LAN

16 TO

CONTROLLER

Mini XLR

Connector

Connects to the Kramer VP-747T Presentation Switcher Control Panel

(optional). Pins B (-) and A (+) are for RS-485; pin G may be connected to the

Ground or the shield if desired

17 PREVIEW OUT VGA 15-pin HD

Connector

Connects to a VGA (analog interface) graphics

acceptor

18 DVI/HDMI Connector Connects to a DVI or HDMI acceptor Using a

DVI/HDMI adapter or the Kramer C-HM/DM

HDMI to DVI Single Link (18+1 pin) cable

19 PROGRAMMING USB 2 Connector For Program firmware download

20 USB 1 Connector For Preview firmware download

21 PROGRAM

OUT

VGA 15-pin HD

Connector

Connects to a VGA (analog interface) graphics

acceptor

22 DVI/HDMI Connector Connects to a DVI or HDMI acceptor

23 INPUTS (from 1

to 8)

R/PR BNC Connector Connects to the R or PR output of the RGB,

RGBHV, RGBS, or component video source

24 G/Y/CV BNC Connector Connects to the G, Y or CV output of the RGB,

RGBHV, RGBS, component video, composite

video, or s-Video source

Made up of the Y on the G/Y/CV connector

together with the C on the B/Pb/C connector

25 B/PB/C BNC Connector Connects to the B, PB or C output of the RGB,

RGBHV, RGBS, component video or s-Video

source

26 HS/CS BNC Connector Connects to the horizontal or composite sync

RGBHV or RGBS source

27 VS BNC Connector Connects to the vertical sync RGBHV source

28 INPUTS DVI/HDMI 2 Connector Connect to the DVI/HDMI 2 source

29 DVI/HDMI 1 Connector Connect to the DVI/HDMI 1 source

VP-747 - Installing in a Rack 11

4 Installing in a Rack

This section provides instructions for rack mounting the unit.

12 VP-747 - Connecting the VP-747

5 Connecting the VP-747

Always switch off the power to each device before connecting it to your

VP-747. After connecting your VP-747, connect its power and then

switch on the power to each device.

The VP-747 is a universal presentation matrix switcher/scaler that lets you choose

what sources to connect to the inputs. For example, you can connect just five

sources: an RGBHV source, two DVI/HDMI sources, an HDTV source and an

RGBS source (as the example in

Figure 3 shows).

To connect the VP-747 as illustrated in the example in Figure 3, do the following:

1. Connect the following video sources:

 An HDMI source to the INPUT DVI/HDMI 1 connector

 An HDMI source to the INPUT DVI/HDMI 2 connector

 An HDTV satellite receiver source to the R/PR, G/Y/CV, and B/PB/C

BNC INPUT 6 connectors (PR/Y/PB)

 An RGBHV computer graphics source to the R/PR, G/Y/CV, B/PB/C,

HS/CS and V BNC INPUT 8 connectors (R, G, B, H, V)

2. Connect the PROGRAM OUT:

 DVI/HDMI connector to the plasma display

 VGA 15-pin HD connector to the analog display

 R/PR, G/Y, B/PB, (PR, Y, PB) BNC OUTPUT connectors to the YUV

acceptor, for example, a projector (PR,Y, PB)

3. Connect the PREVIEW OUT R/PR, G/Y, B/PB, HS and VS BNC OUTPUT

connectors to the display (R, G, B, H, V)

4. Connect the power cord.

VP-747 - Connecting the VP-747 13

5. If required, connect:

 A PC via RS-232, see

 The Kramer VP-727A Audio Switcher via the To AUDIO UNIT RS-485

port, see

Section 6.1

 The Kramer VP-747T Presentation Switcher Control Panel via the TO

CONTROLLER mini XLR port, see

Section 6.2

 The Ethernet port, see

Section 6.3

Section 6.4

Figure 3: Connecting to the VP-747

14 VP-747 - Connecting the VP-747

5.1 Connecting Different Source Types

As the VP-747 is universal, you can connect any type (format) of video to the

inputs.

Figure 4 shows an example of how to connect eight sources to the rear

panel of the VP-747: an RGBHV source, an HDMI source, a CV source, a Y/C

source, a component video source, an HDTV source, an RGBCs source and an

RGB source.

Connecting the Different Source Types

Input 1: Input 2: Input 3: Input 4: Input 5: Input 6: Input 7: Input 8:

RGBHV HDMI CV Y/C Component HDTV RGBCs RGB

R/PR R PR PR R R

G/Y/CV G CV Y Y Y G G

B/PB/C B C PB PB B B

HS/CS HS CS

VS VS

HDMI HDMI

Figure 4: Example for Connecting the INPUTS

VP-747 - Connecting the VP-747 15

5.2 Connecting the Outputs

Figure 5 illustrates an example of the different connection types available for the

Preview and Program outputs:

For PROGRAM OUT, connect the:

• R/PR, G/Y, B/PB, (PR, Y, PB) BNC OUTPUT connectors to the YUV

acceptor, for example, a projector

• HDMI connector to a plasma display

• VGA a 15-pin HD computer graphics video connector to an analog display

• For PREVIEW OUT, connect the:

• HDMI connector to an LCD display

• VGA 15-pin HD computer graphics video connector to an analog display

• R/PR, G/Y, B/PB, HS and VS BNC OUTPUT connectors to a display

Figure 5: Connecting the PREVIEW OUT/PROGRAM OUT Connectors

Page is loading ...

Kramer Electronics VP-747 User manual

Brand: Kramer Electronics

Model: VP-747

Category: Video switches

Type: User manual

Download PDF

report

Kramer Electronics VP-747 User manual

Kramer Electronics VP-747 User manual

Related papers

Other documents