Bon Tool 14-885 Operating instructions

The Canopy Tap is used along the top of a scaffold set-up to hold

weather protection material in place. It fits on top of any 5’ frame.

Brackets to hold 2’ x 4’ wood have been welded to the outside leg.

Weather protection clips can also be used.

NOTE:

Any time weather protection is used, additional scaffold tying is

required due to wind loads.

INSTRUCTIONS

#14-885 Canopy Top for Scaffold End Frames

IS14885 5/15

4430 Gibsonia Rd. • Gibsonia, PA 15044 • USA • www.bontool.com