Bon Tool 32-532 Installation guide

Brand: Bon Tool

Model: 32-532

Type: Installation guide

IS32530 08/09

IMPORTANT:

This material is called Low Density Polyethylene

LPDE type “A” resinol. It is a non-hazardous, very

flexible, extremely tough and non porous plastic, so

paint (after buildup) will peal off quite easily.

However, DO NOT let stencils soak in thinners.

No thinner is required to maintain this product.

Also, when cleaning, try not to scratch the surface.

This will give paint something to hold on to.

UNPACKING INSTRUCTIONS:

After receiving this package, please follow these

instructions. We ship all our stencils rolled up in

boxes to save you shipping costs. However,

because this material is so soft and flexible it will

tend to stay curled up for a while after riding in a

box for a few days. Some very easy hints to

prepare your stencils prior to use would be:

1. Unpack all stencils as soon as you receive this

package.

2. For quickest results just lay the stencils

curve/face down on a hard surface in the sun

for a couple of hours. This generally will warm

the plastic up and allow it to go to its original

shape.

3. After use, please store these stencils flat and face

down for easy use next time around.

STORAGE:

For best results, keep the stencil sheets stored flat

and face down at normal room temperature. If you

have to use stencils in cold weather (50 degrees or

colder), be very careful handling plastic. The

colder it gets, the more brittle and stiff the

plastic becomes.

FFiivvee eeaassyy sstteeppss ttoo

cchhaannggee oorrddiinnaarryy

ccoonnccrreettee iinnttoo

ssoommeetthhiinngg

““eexxttrraaoorrddiinnaarryy””

1. Place stencils

2. Embed stencil with roller

3. Add True Color

™

Hardener and float

concrete

4. Add True Color

™

Release and texture

with roller

5. Remove stencils and seal

Sample of Natural Stone Pattern

4430 Gibsonia Rd. • Gibsonia, PA 15044 • USA • www.bontool.com

INSTRUCTIONS

Plastic Stencils

Bon Tool 32-532 Installation guide

Bon Tool 32-532 Installation guide

Bon Tool 32-532 Installation guide

Related papers

Other documents