urmet domus MT101-013 Technical Manual

  • Hello! I am an AI chatbot trained to assist you with the urmet domus MT101-013 Technical Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
sec.2g
1
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
1128
SECTION 2G
(REV.E)
WALL MOUNTED
PANEL
1128
Download from www.urmet.com Technical Manuals area.
SECTION CONTENTS
SMYLE WALL-MOUNTED PANEL 2
TECHNICAL FEATURES .................................................................2
DOOR UNITS ...................................................................................2
Door phone door units ..................................................................2
Video door phone door units ........................................................3
Description of terminals Ref. 1728/80...........................................3
Amplicationregulation.................................................................3
PANEL INSTALLATION ...................................................................3
WALL-MOUNTED PANEL Mod. 1128 5
TECHNICAL FEATURES .................................................................5
CASES WITH FRONT
FOR OUTDOOR HOUSE PHONE STATION ..................................5
DOOR PHONE DOOR UNITS .........................................................5
Amplicationregulation.................................................................6
CASING WITH FRONT ....................................................................6
CASINGS WITH FRONT
FOR OUTDOOR VIDEO HOUSE PHONE STATION ...................... 6
OUTDOOR VIDEO HOUSE PHONE STATION
WITH COAXIAL CABLE ...................................................................7
Camera lens direction adjustment ................................................7
Amplicationregulation.................................................................7
PUSH-BUTTONS .............................................................................7
Push-buttonandnametagassembly ...........................................7
SPECIAL MODULES........................................................................8
PANEL INSTALLATION ...................................................................8
INSTALLING CASINGS SIDE BY SIDE .........................................10
FLUSH-MOUNTING .......................................................................10
4+n DOOR PHONE SYSTEMS -
Examples of modular constructions with various capacities...........12
COAX VIDEO DOOR PHONE SYSTEMS -
Examples of modular constructions with various capacities...........13
PANELS
WALL MOUNTED PANEL Mod. SMYLE
2
sec.2g
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
SMYLE WALL-MOUNTED PANEL
TheSmylepanel, with itsparticularlyinnovative design, isdesigned
andmadeforinstallationinone-andtwo-familydoorphoneandvideo
doorphonesystems.Thefollowingmodelsareavailable:
Doorphonesystems:
With 1 call button Ref. 1129/1
With 2 call buttons Ref. 1129/2
Videodoorphonesystems:
With 1 call button Ref. 1729/1
With 2 call buttons Ref. 1729/2
Thepanelcanbeinstalledin503standard ush-mounting boxes or
wall-mounted with screws and bolts to cut installation times without the
needformasonrywork.Consideringthepanel’ssmallwidth,itisalso
suitableforbeingttedonmostgatepoleswithappropriatefasteners.
Thepanelshavenametagsholdersandvariabledimensionsaccording
to the model: 40 x 60mm (one user panel) and 20 x 60mm (two user
panel).
In both cases, the name tags are backlit by two LEDS and can be
accessedbyopeningthefrontpartofthepanel.
TECHNICAL FEATURES
Dimensions: 185 x 99 x 40mm
Material: ABS base and hood, anodised aluminium front
Nametags: with 1 button 35 x 56mm
with 2 buttons 15 x 56mm
Totalbuttonstroke: 2mm
Idlebuttonstroke: 1.2mm before contact closes
Isolationvoltagebetweencontacts: 500Veff
Maximum cut-off current: 2A on resistive load
Nametaglighting: 2 LEDs on reecting base
Nametaglightpower: 12Vac
Nametaglightdraw: max. 30mA
Workingtemperaturerange: from -10 to 50°C
Degreeofprotection: IP44
DOOR UNITS
DOOR PHONE DOOR UNITS
Ref. 1129/1 and Ref. 1129/2 Smyle panels can be installed with
followingdoorunits:
4+nsystemspoweredat6Vdc Ref. 1128/500
4+nsystemspoweredat12Vdc Ref. 1128/510
Beforestartinginstallationoperationsoftheoutdoorstation,remove
the plastic support as described below:
Thepanelisclippedinwithoutneedingspecialtoolsintothebodyof
thedoorunitincorrespondencewiththespecicclipsonthesidesof
the base of the panel as shown below.
Completeinstallation by tting the microphonein the housing in the
baseonthebottomright.
DESCRIPTION OF TERMINALS Ref. 1128/500
+ Door unit power positive
- Doorunitpowernegative
1 Traditionalaudioout(todoorphonespeaker)
1A Electronicaudioout(todoorphonespeaker)
2 Voice in (from door phone microphone)
DESCRIPTION OF TERMINALS Ref. 1128/510
~ Door unit 12Vac power
-/~ Powerground
PS Tonegeneratoroutputforsimultaneouscalluptotwounits
1 Traditionalaudioout(todoorphonespeaker)
1A Electronicaudioout(todoorphonespeaker)
2 Voice in (from door phone microphone)
SMYLE WALL-MOUNTED PANEL
TECHNICAL FEATURES
DOOR UNITS
DOOR PHONE
SYSTEM
VIDEO DOOR PHONE
SYSTEM
Ref. 1128/500
1128/510
1
2
3
PANELS WALL MOUNTED PANEL Mod. SMYLE
sec.2g
3
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
VIDEO DOOR PHONE DOOR UNITS
TheSmyleRef.1729/1andRef.1729/2panelsmustbeequippedwith
ablackandwhitecoaxvideodoorphonedoorunitRef. 1728/80.
Powervoltage: 18Vdc
Max. draw: <200 mA
Camera sensor: CCD 1/3” semi pinhole
Videooutputsignal: 1Vpp composite
75Ω nominal
Asthedoorphonedoorunits,thepanelisclippedinwithoutneeding
specialtoolsintothebodyofthedoorunitincorrespondencewiththe
specicclipsonthesidesofthebaseofthepanelasshownbelow.
Completeinstallation by tting the microphonein the housing in the
baseonthebottomright.
Afterinstallation, the camera direction canbe adjustedaccording to
the position of the framed subject. This operation can be performed
manually after opening the front panel by means of the articulated
jointedwithoutrequiringspecialtools.
DESCRIPTION OF TERMINALS Ref. 1728/80
+ Door unit power positive
- Doorunitpowernegative
1 Traditionalaudioout(todoorphonespeaker)
1A Electronicaudioout(todoorphonespeaker)
2 Audio in (from door phone microphone)
+TC Camera power positive
R1 Camerapowernegative
V3 Videosignal
V5 Videosignalearth
AMPLIFICATION REGULATION
Amplicationinthetwodirectionscan be adjusted by meansoftwo
potentiometers accessible with the panel is open.
Transmission levels are calibrated at the factory. For this reason,
they should only be adjusted when absolutely necessary (e.g. to
eliminateLarsenfeedback).Inthesecases,turnthevolumeadjustment
potentiometeroutwardstoavoidworseningacousticbalance.
To adjust external volume:
Turn the potentiometer EXT.
clockwisetoturnthevolumeupand
anticlockwisetoturnitdown.
To adjust internal volume:
Turn the potentiometer INT.
clockwisetoturnthevolumeupand
anticlockwisetoturnitdown.
PANEL INSTALLATION
The installation phases of the two-button door phone panel
is shown below. Proceed in the same way to install the other
models.
Removethenametaglightcircuit.
Fastenthe base ontoa at wall at theheight shown inthe gure
usingeithertheboltsprovidedora503box.
SMYLE WALL-MOUNTED PANEL
PANEL INSTALLATION
Ref. 1728/80
5°
10°
5° 5°
ø 4 mm
1,55 m ÷ 1,65 mm
Mod. 503
PANELS
WALL MOUNTED PANEL Mod. SMYLE
4
sec.2g
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
SMYLE WALL-MOUNTED PANEL
PANEL INSTALLATION
Insertthedoorunitandthemicrophoneonthebaseofthespecic
housingasshownintherespectiveparagraphs.
Connect the wires (it is advisable to have the wire protrude from
the wall by approximately 85 - 90mm for door phone panel and
approximately40-45mmforvideodoorphonepanels).
Power terminals ~0 and ~12 of the name tag LED circuit at
12Vac.
Fastenthenametaglightcircuitmakingthewirespassunderneath
the support.
Adjust the volume and position of the camera (if present).
Writethenameonthenametagsandinserttheminthehousings.
Insert the front part of the panel on the base and fasten it with the
socketheadscrewusingthewrench(2mm)provided.
FLUSH-MOUNTING
CLICK
NO
Ref. 1129/50
209 mm
11
5 mm
47 mm
PANELS WALL MOUNTED PANEL Mod. 1128
sec.2g
5
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Mod. 1128
WALL-MOUNTED PANEL Mod. 1128
TECHNICAL FEATURES
CASES WITH FRONT FOR OUTDOOR HOUSE PHONE STATION - DOOR PHONE DOOR UNITS
WALL-MOUNTED PANEL Mod. 1128
The push-button panels Mod. 1128 are the ideal compromise
between inexpensiveness, design, straightforward installation and
communicatingefciencyformakingDOORPHONESYSTEMSand
videodoorphonesystems.
All the push-button panels can be installed rested on the wall with
screwsandplugskeepingalowprojectionfromthewall:just41mm.
In consideration of its reduced width, installation of the push-button
panelisalsopossibleonagatepost.
Thepush-buttons,whichalso actastransparentcoverforthename
tag,aremodularandcomeintwoversionswithdifferentsizes.
Thefollowingthreemodelsofpush-buttonpanelsareavailable:set-up
foroutdoorhousephonestation,setupforoutdoorvideohousephone
station,andset-upforpush-buttonsonly.Everymodelisavailablein
twodifferentcolours:Anthraciteandgrey.
Theadditionalcasingswithpush-buttonsonlycanbettedattheside
ofthosesetupfortheoutdoorstation,therebymakingitpossibleto
makeDOORPHONESYSTEMSwithamaximumof16smallpush-
buttons or VIDEO DOOR PHONE SYSTEMS with a maximum of 14
small push-buttons.
Itispossibletomakethefollowingtypesofsystemsdependingonthe
outdoorstationinstalledinthecasings:
4+nwiredoorphonesystems–with6Vdcpowervoltage
4+nwiredoorphonesystems–with12Vacpowervoltage
Blackandwhitevideodoorphonesystemwithcoaxialcable
Inthecase of particularrequirementsthe push-button panelcanbe
ush-ttedusingthespecicboxRef.1128/51,inthiscase,protrusion
fromtheedgeofthewallisreducedtoafewmillimetres.
TECHNICAL FEATURES
Dimensions: 246 x 99 x 41mm
Material: ABS base and hood
Anodised aluminium front
Nametag: small button 20 x 60mm
big button 40 x 60mm
Totalbuttonstroke: 2mm
Idlebuttonstroke: 1,2mm
Before contact closes
Isolationvoltagebetweencontacts: 500Veff
Maximum cut-off current: 2A on resistive load
Nametaglighting: green LEDs on reecting base
Nametaglightpower: 12Vac
Nametaglightdraw: see housing description
Workingtemperaturerange: -10 ÷ 50°C
Degreeofprotection: IP44
CASES WITH FRONT FOR OUTDOOR HOUSE
PHONE STATION
Thecasingswithfrontforoutdoorhousephonestationcomeintwo
versions of different colour:
Anthracite Ref. 1128/20
Grey Ref. 1128/21
In both it is possible to install up to 6 small push-buttons (20 x 60mm)
orupto3largepush-buttons(40x60mm).
Thecasingsaresuppliedwiththreereectingbaseswiththerelated
lightingcircuitwithledswithamaximumuptakeof90mA.
DESCRIPTION OF TERMINALS
~0
}
Nametaglightpower
~12
DOOR PHONE DOOR UNITS
ThehousingMod.1128canbeinstalledwhitfollowingdoorunits:
4+nsystemspoweredat6Vdc Ref. 1128/500
4+nsystemspoweredat12Vdc Ref. 1128/510
Beforestartinginstallationoperationsoftheoutdoorstation,remove
the plastic support as described below:
Thepanelisclippedinwithoutneedingspecialtoolsintothebodyof
1
2
3
PANELS
WALL MOUNTED PANEL Mod. 1128
6
sec.2g
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Mod. 1128
WALL-MOUNTED PANEL Mod. 1128
CASING WITH FRONT
CASINGS WITH FRONT FOR OUTDOOR VIDEO HOUSE PHONE STATION
thedoorunitincorrespondencewiththespecicclipsonthesidesof
the base of the panel as shown below.
Completeinstallation by tting the microphonein the housing in the
base.
DESCRIPTION OF TERMINALS Ref. 1128/500
+ Door unit power positive
- Doorunitpowernegative
1 Traditionalaudioout(todoorphonespeaker)
1A Electronicaudioout(todoorphonespeaker)
2 Voice in (from door phone microphone)
DESCRIPTION OF TERMINALS Ref. 1128/510
~ Door unit 12Vac power
-/~ Powerground
PS Tonegeneratoroutputforsimultaneouscallofupto2units
1 Traditionalaudioout(todoorphonespeaker)
1A Electronicaudioout(todoorphonespeaker)
2 Voice in (from door phone microphone)
AMPLIFICATION REGULATION
Amplicationinthetwodirectionsmaybeadjustedbymeansoftwo
potentiometerswhichcanbeaccessedafterremovingtheextractable
front panel.
Transmission levels are calibrated at the factory. For this reason,
they should only be adjusted when absolutely necessary (e.g. to
eliminateLarsenfeedback).Inthesecases,turnthevolumeadjustment
potentiometeroutwardstoavoidworseningacousticbalance.
To adjust external volume:
Turnthepotentiometershownclockwisetoturnthevolumeupand
anticlockwisetoturnitdownEXT. .
To adjust internal volume:
Turnthepotentiometershownclockwisetoturnthevolumeupand
anticlockwisetoturnitdownINT. .
CASING WITH FRONT
Thecasingswithfrontcomeintwoversionsofdifferentcolour:
Anthracite Ref. 1128/10
Grey Ref. 1128/11
Thesecasings,whicharealreadysetupwiththeNametaglightpower
circuit,makeitpossibletoincreasethenumberofusersthatcanbe
called.Indeed,itispossibletoinstallupto10smallpush-buttons(20x
60mm)orupto5largepush-buttons(40x60mm)onthem.
Thecasingswithfrontcanbeinstalledatthesideofanyotherpush-
buttonpanelsetupforoutdoorstation,usingthespecialfairleadshims
providedandfollowingtheinstructionsgiveninthe“Installingcasings
sidebyside”paragraph.
The casings are supplied with ve reecting bases with the related
lightingcircuitwithledswithamaximumuptakeof150mA.
DESCRIPTION OF TERMINALS
~0
}
Nametaglightpower
~12
CASINGS WITH FRONT FOR OUTDOOR VIDEO
HOUSE PHONE STATION
Thecasingswithfrontforoutdoorvideohousephonestationcomein
two versions of different colour:
Anthracite Ref. 1728/20
Grey Ref. 1728/21
In both it is possible to install up to 4 small push-buttons (20 x 60mm)
orupto2largepush-buttons(40x60mm).
The casings are supplied with two reecting bases with the related
lightingcircuitwithledswithamaximumuptakeof60mA.
DESCRIPTION OF TERMINALS
~0
}
Nametaglightpower
~12
Ref. 1128/500
1128/510
PANELS WALL MOUNTED PANEL Mod. 1128
sec.2g
7
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Mod. 1128
WALL-MOUNTED PANEL Mod. 1128
OUTDOOR VIDEO HOUSE PHONE STATION WITH COAXIAL CABLE
PUSH-BUTTONS
OUTDOOR VIDEO HOUSE PHONE STATION
WITH COAXIAL CABLE
Thepanelsmustbeequippedwithacoaxvideodoorphonedoorunit
Ref. 1728/80.
The main characteristics of this video door phone door unit are:
Powervoltage: 18Vdc
Max. draw: <200 mA
Camera sensor: CCD1/3” semi pinhole
Videooutputsignal: 1Vpp composite
75Ω nominal
Asthedoorphonedoorunits,thepanelisclippedinwithoutneeding
specialtoolsintothebodyofthedoorunitincorrespondencewiththe
specicclipsonthesidesofthebaseofthepanelasshownbelow.
Completeinstallation by tting the microphonein the housing in the
base.
DESCRIPTION OF TERMINALS
+ Door unit power positive
- Doorunitpowernegative
1 Traditionalaudioout(todoorphonespeaker)
1A Electronicaudioout(todoorphonespeaker)
2 Voice in (from door phone microphone)
+TC Camera power positive
R1 Camerapowernegative
V3 Videosignal
V5 Videosignalearth
CAMERA LENS DIRECTION ADJUSTMENT
Afterinstallation, the camera direction canbe adjustedaccording to
the position of the framed subject. This operation can be performed
manually after opening the front panel by means of the articulated
jointedwithoutrequiringspecialtools.
AMPLIFICATION REGULATION
Amplicationinthetwodirectionsmaybeadjustedbymeansoftwo
potentiometerswhichcanbeaccessedafterremovingtheextractable
front panel.
Transmission levels are calibrated at the factory. For this reason,
they should only be adjusted when absolutely necessary (e.g. to
eliminateLarsenfeedback).Inthesecases,turnthevolumeadjustment
potentiometeroutwardstoavoidworseningacousticbalance.
To adjust external volume:
Turnthepotentiometershownclockwisetoturnthevolumeupand
anticlockwisetoturnitdownEXT. .
To adjust internal volume:
Turnthepotentiometershownclockwisetoturnthevolumeupand
anticlockwisetoturnitdownINT. .
PUSH-BUTTONS
The push-buttons to be installed on the various casings are to be
boughtseparatelyandcomeintwoversionswithdifferentsizes:
Small button 20 x 60mm Ref. 1128/1
Bigbutton 40 x 60mm Ref. 1128/2
The push-buttons are supplied complete with:
Buttonbodythatcanbeclippedontothebaseof the push-button
panel.
Transparentprotectivecoverwithindicationofpressingpoint.
Supportforinstallationandclippingontothecasings.
Transparentnametag.
Nametaglightingdiffuser.
The large push-buttons should always be positioned in
correspondence with the reecting chambers and not
superimposed on two of them.
PUSH-BUTTON AND NAME TAG ASSEMBLY
Fitthebuttonbodyonthebaseofthecasing.
The large push-buttons should be assembled so that the button
body corresponds with the name tag pressing point as shown
in the gure below.
5°
10°
5° 5°
1
2
3
4
Ref. 1728/80
1
2
PANELS
WALL MOUNTED PANEL Mod. 1128
8
sec.2g
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Mod. 1128
Fit the support with the transparent cover starting from the top
downwards.
To remove the supports with transparent cover use a screwdriver
and lever on the fastening catches.
Writethenameonthenametagsandinserttheminthehousings.
The gures above refer to the installation of a large push-
button, the small push-button Ref. 1128/1 should be installed
in the same way.
SPECIAL MODULES
Inreplacementofthepush-buttonsthefollowingspecialmodulescan
be installed:
Anthraciteblankmodules
(dimensions 20 x 60mm): Ref. 1128/30
Greyblankmodules
(dimensions 20 x 60mm): Ref. 1128/31
Transparentmodulewithtagforhousenumber
(dimensions 40 x 60mm): Ref. 1128/5
NOTE: the installation procedures are the same as those described
for the push-buttons.
PANEL INSTALLATION
The installation phases of the door phone panel is shown
below. Proceed in the same way to install the other models.
Removethenametaglightcircuit.
Fasten the casing base on a at wall, at the height shown in the
gure,usingthescrews(A)andwallplugs(B)providedoronabox
Mod. 503.
WALL-MOUNTED PANEL Mod. 1128
SPECIAL MODULES
PANEL INSTALLATION
Rossi
C
LIC
K
Rossi
A
A
B
B
1,55 m ÷ 1,65 m
1
2
3
1
2
3
Ref. 1128/2
C
LIC
K
3
2
1
1
PANELS WALL MOUNTED PANEL Mod. 1128
sec.2g
9
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Mod. 1128
Insertthedoorunitandthemicrophoneonthebaseofthespecic
housingasshownintherespectiveparagraphs.
Insertthepush-buttonsonthebaseofthecasing.
Push-button Ref. 1128/2 should be positioned so that it is
under the indication of the name tag pressing point.
Connect the wires (it is advisable to have the wire protrude
fromthe wall by approximately 100mm for doorphone panel and
approximately90mmforvideodoorphonepanels).
Power terminals ~0 and ~12 of the name tag LED circuit at
12Vac.
Tosimplifypush-buttonwiring,abuttoncommonjoiningbar(G/T)is
provided to be installed between the terminals of the buttons and cut
accordingtorequirements.
Fastenthenametaglightcircuitmakingthewirespassunderneath
the support.
Adjust the volume and position of the camera (if present).
Fit the support with the transparent cover starting from the top
downwardsasshowninthegurebelow.
Writethenameonthenametagsandinserttheminthehousings.
WALL-MOUNTED PANEL Mod. 1128
PANEL INSTALLATION
B
A
Mod. 503
(G/T)
1
2
1
2
C
LIC
K
3
Rossi
CLIC
K
Rossi
PANELS
WALL MOUNTED PANEL Mod. 1128
10
sec.2g
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Mod. 1128
WALL-MOUNTED PANEL Mod. 1128
INSTALLING CASINGS SIDE BY SIDE
FLUSH-MOUNTING
Insert the front part of the panel on the base and fasten it with the
socketheadscrewusingthewrench(2mm)provided.
INSTALLING CASINGS SIDE BY SIDE
Thecasingscan be joinedtogetherusing the specialfairleadshims
(provided)eitherverticallyorhorizontally.
Theshimsarehollowto allow the passageofwiresfromone push-
button panel to the other.
To install a casing with buttons only at the side of a casing for
outdoor station (both house phone and video house phone) proceed
as follows:
Take out the removable plug of the casing on the side for which
installationisrequired.
Removethe outer wallin correspondenceof the holesleft by the
plugswiththehelpofat-nosedpliers.
Insertthefairleadshimsandjointhetwocasings.
HORIZONTAL INSTALLING SIDE BY SIDE
VERTICAL INSTALLING SIDE BY SIDE
FLUSH-MOUNTING
For ush-mounting the push-button panel the special box must be
purchasedseparately(Ref. 1128/51),thenproceedasfollows:
Maketheholeforlettingthroughtheconnectionwiresbeforeclosing
theush-mountingbox.
C
VERTICAL INSTALLING
SIDE BY SIDE
HORIZONTAL INSTALLING
SIDE BY SIDE
D
CLICK
A long nose pliers is
suggested.
CLICK
A long nose pliers is
suggested.
PANELS WALL MOUNTED PANEL Mod. 1128
sec.2g
11
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Mod. 1128
Embed the box in the wall.
Fasten the frame provided to the box.
Screwthecasingbasetotheframe.
Complete installation as described in the previous paragraphs
accordingtothetypeofcasing.
For installing push-button panels side by side, special fairlead
shims are provided to be placed between the ush-tting
boxes.
HORIZONTAL INSTALLING SIDE BY SIDE
VERTICAL INSTALLING SIDE BY SIDE
NO
WALL-MOUNTED PANEL Mod. 1128
FLUSH-MOUNTING
PANELS
WALL MOUNTED PANEL Mod. 1128
12
sec.2g
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Mod. 1128
WALL-MOUNTED PANEL Mod. 1128
4+n DOOR PHONE SYSTEMS
EXAMPLES OF MODULAR CONSTRUCTIONS WITH VARIOUS CAPACITIES
4+n (with large push-buttons)
BUTTONS NUMBER
BUTTONS NUMBER
COMMON
PRODUCTS
ANTHRACITE
Door unit with 6Vdc power voltage (*)
Buttons
Door unit with 12Vac power voltage (*)
Casing with front for door unit
Blank module (@)
Casing with front
GRAY
ACCESSORIES
Casing with front for door unit
Blank module (@)
Casing with front
1128/500
1128/2 1
2 3 4 5 6 7 8
1128/510
1128/20
1128/10
1128/21
1128/11
1128/31
1128/51
1
2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1128/30
24
2
68 4
24 268 4
11
1 1
2
2
1 11 1
11
1 1
1 11 1
11
1 1
1 11
11 1 2 22
1
11
1 1
1 11
1 11
1 11
1
1 1
1 1
1 2 3 4 5 6 7 8
4+n (with small push-buttons)
BUTTONS NUMBER
BUTTONS NUMBER
COMMON
PRODUCTS
ANTHRACITE
Door unit with 6Vdc power voltage (*)
Buttons
Door unit with 12Vac power voltage (*)
Casing with front for door unit
Blank module (@)
Casing with front
GRAY
ACCESSORIES
Casing with front for door unit
Blank module (@)
Casing with front
1128/500
1128/1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1128/510
1128/20
1128/10
1128/21
1128/11
1128/31
1128/51
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
1128/30
45 3 5 191 67 3 22 48
11
1
1
1
1 1
2 2 2 2 22 2 2
1 11 1 1 11 11
11
1 1 11
11 11 1 1 11
11
11 1 1 11 11 11 1 1 11
11 1 1 11
11
11 1 1 11 11 11 1 1 11 11
45
3
5
19
1 67 3 22 48
1 11 111 1 111
1 11 1
2 2
11 1 111
1 2 3 4 5 6 7 8 9
1613 14 1510 11 12
(*) alternatives
(@) as an alternative to two blank modules, it is possible to install
a house number module Ref. 1128/5
Flush mounting box
Flush mounting box
(*) alternatives
(@) as an alternative to two blank modules, it is possible to install
a house number module Ref. 1128/5
PANELS WALL MOUNTED PANEL Mod. 1128
sec.2g
13
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
Mod. 1128
WALL-MOUNTED PANEL Mod. 1128
COAX VIDEO DOOR PHONE SYSTEMS
EXAMPLES OF MODULAR CONSTRUCTIONS WITH VARIOUS CAPACITIES
coax (with large push-buttons)
BUTTONS NUMBER
BUTTONS NUMBER
COMMON
PRODUCTS
ANTHRACITE
Video door unit with coax cable
Buttons
Casing with front for door unit
Blank module (@)
Casing with front
GRAY
ACCESSORIES
Casing with front for door unit
Blank module (@)
Casing with front
Flush mounting box
1728/80
1128/2
1728/20
1128/10
1128/21
1128/11
1128/31
1128/51
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1128/30
2 46 2
2 46 2
11
1 1
2
1 11
11 1
1
1 11
11 2 2 22
11
1 1
1 11
1 11
1 11 1
1
coax (with small push-buttons)
BUTTONS NUMBER
BUTTONS NUMBER
COMMON
PRODUCTS
ANTHRACITE
Video door unit with coax cable
Buttons
Casing with front for door unit
Blank module (@)
Casing with front
GRAY
ACCESSORIES
Casing with front for door unit
Blank module (@)
Casing with front
Flush mounting box
1728/80
1128/1
1728/20
1128/10
1728/21
1128/11
1128/31
1128/51
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1128/30
23 1
11
1
1
1
2 2 2 2 22 2 2
1 11
1 1
9 8
1 1
1 1 11 11
11 1 111 11 1 1 11
11 1 2 21
11
11 1 111 11 1 1 11 11
23
1
3
7
45 126
9 8 37 45 126
11 11 1 111
11 11 1 111
(@) as an alternative to two blank modules, it is possible to install
a house number module Ref. 1128/5
(@) as an alternative to two blank modules, it is possible to install
a house number module Ref. 1128/5
21 3 4 5 6 7
1 2 3 4 5 6 7
1
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1 2 3 4 5 6 8
9
7
10 11 12 13 14
14
sec.2g
DOOR PHONE AND VIDEO DOOR PHONE SYSTEM: Product Technical Manual
1128
/