i3 International i3-B731 Quick start guide

Brand: i3 International

Model: i3-B731

Category: Security cameras

Type: Quick start guide

• Power Supply

Ensure the supplied voltage meets the power consumption requirements of this

camera before powering the camera on. Incorrect voltage may cause irreparable

damage to the video camera and will effectively void the camera warranty.

• Cleaning

For maximum optical clarity, the camera dome or lens must remain clean. Use a -

soft, dry cloth to remove finger prints or dust from the dome cover.

Use a blower to remove dust from the lens. -

Clean the body with a soft, dry cloth. If it is very dirty, use a cloth dampened with a -

small quantity of neutral detergent, then wipe dry.

Do not use volatile solvents such as alcohol, benzene, or thinners, as they may -

damage the surface finishes.

• Servicing

To avoid electrical shock and to preserve the product warranty, DO NOT -

disassemble the camera. Refer servicing to qualified personnel only.

• Package Contents

IR Bullet Camera x1 -

Printed Quick Start Guide x1 -

CD-ROM (User Manual) x1 -

Guide Pattern Sticker (Mounting Template) x1 -

TP4-25L screw x3 -

1/4” x 1 3/8” plastic anchor x3 -

• Camera Parts

• Camera Installation

Step 1. Mounting the camera

Place the “Guide Pattern Sticker” included with your purchase on the desired location.1.

Drill three holes on the installation surface and insert provided anchors into the pre-2.

drilled holes.

Install the bracket base onto the installation surface and fasten securely using the 3.

provided screws.

Step 2. Connecting the cables

Connect the camera’s power/video cable to external power and monitor.

Waterproof IR D/N Bullet Camera i3-B731

Quick Start Guide

Waterproof IR D/N Bullet Camera

QUICK START GUIDE

Step 3. Adjusting the camera angle

Loosen the adjustment screws and rotate the adjustment ring to loosen.

Adjust the angle for optimum image view. After the adjustment, re-tighten the adjustment

ring and re-fasten the adjustment screws.

PART NUMBER B731 IR BULLET CAMERA

Signal system NTSC, PAL

Image sensor 1/3” SONY Exview HAD CCD II

Scanning system 2:1 Interlace

NTSC: 59.94 Hz (V), 15.734KHz (H)

PAL: 50Hz (V), 15.625KHz (H)

Sync system Internal

Horizontal resolution 700 TV line

Day / Night mode Digital Day / Night

Built-in lens f=4.3mm, F1.8

IRIS control N/A

Effective pixels No. NTSC: 976 (H) × 494 (V), PAL: 976 (H) × 582 (V)

Min. illumination F1.8 color mode: 0.04 lux @50 IRE,

0.02 lux @30 IRE,

0 lux (IR LED Turn ON)

AGC, BLC, flickerless Auto, Always on(Center), N/A

White balance ATW (2500°K~10000°K)

S/N ratio > 50dB (AGC off)

Angle of view Horizontal:73.7°

Vertical:47.3°

WDR N/A

Video output 1Vpp composite output, 75 ohm

Gamma correction 0.45

Iris control N/A

DNR N/A

Motion detection N/A

IR LED Super power LED x24 pcs

IR wavelength 850nm

IR distance 25M (80 ft), base on object of view reflecting

IR light

IR turn on status Under 10 lux by photocell auto controlled

LED life > 10,000 hours (50ºC/122ºF)

Privacy mask N/A

Multi language N/A

ENVIRONMENT

Housing material Metal

Weight 300g (0.67 lb) approx.

Operating temperature -40°C ~ 50°

Operating humidity 90% RH max

Storage temperature -20°C ~ 60°C (-4º~140º F)

Dimensions (øxH) ø71mm x 68.8mm x 158.9mm

(2.8” x 2.71”x 6.26”)

Vandal resistance N/A

Protection class IP66

ELECTRICAL

Power requirement 12VDC ± 10%

Power consumption 4W (max.)

Electric shutter NTSC: 1/60~1/10k sec, PAL: 1/50~1/10k sec

WARRANTY

i³ Superior 3 year warranty

i3 International i3-B731 Quick start guide

Brand: i3 International

Model: i3-B731

Category: Security cameras

Type: Quick start guide

Download PDF

report

i3 International i3-B731 Quick start guide

i3 International i3-B731 Quick start guide

Related papers

Other documents