2. Computers & electronics
  3. Computer components
  4. System components
  5. Interface cards/adapters
  6. Sunix
  7. ECSA24

Sunix ECSA24 Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Sunix ECSA24 Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.sunix.com.tw
Package
ECSA24 Serial ATA II ExpressCard
CD Driver / User's Manual
Serial ATA II External type cable (Optional)
HEADQUARTERS
SUNIX CO., LTD.
10FL., No.205-3, Sec.3, Pei Sin Road, Sindian City, Taipei County, Taiwan Tel :+886-2-28913-1987 Fax:+886-2-28913-1986 Email:info@sunix.com.tw
Application
ECSA24
Serial ATA II ExpressCard
Features
‧Supports PCI Express Base Specification Revision 1.0a.
‧Single-lane (x1) PCI Express throughput rates up to 2.5 Gbps.
‧Compliant with ExpressCard 34/54mm module specification.
‧Compliant with Serial ATA 1.0 specifications.
‧Support Serial ATA II Port-Multiplier specifications.
‧ExpressCard hot plugging and hot swapping features.
‧Serial ATA Generation 2 transfer rate of 3.0 Gb/s
‧Building in two external Serial ATA II ports for external
storage peripheral.
Overview
ExpressCard, the next evolution of the PC Card, combines a smaller form factor and faster performance with the PC Card
reliability and ease of use. This card is a single-chip solution for Serial-ATAII compact size ExpressCard module and the
interface has a potential transfer rate of up to 500 MB/sec (or 250 MB/sec in each direction) using a single-lane (or x1)
PCI Express link.
SUNIX ECSA24 is a single-chip, one-lane PCI Express to two external Serial-ATA II ports with transfer rate of 3.0 Gb/s ExpressCard.
It was created to meet the need of the ExpressCard market where notebooks, desktops, and docking stations could add
two additional external Serial ATA ports via a single slim-type 54mm wide ExpressCard slot. ECSA24 is fully compatible
with Serial ATA Generation 2 specification and it allows you to connect Serial-ATA compatible devices to your computer,
uch as SATA port multipliers Disk Array Box, Serial-ATA RAID Enclosure, or external storage and ATAPI peripheral.
Specifications
Interface: ExpressCard 54mm Wide
Mode: Serial ATA Generation 2
Controller: Silicon Images Sil3132
Channel: Two external e-SATA ports
‧Supports Legacy Command Queuing(LCQ)
‧Supports Native Command Queuing(NCQ)
‧Supports Non-zero offsets NCQ
‧Supports Out of order data delivery NCQ
‧Supports FIS-based switching with Port Multipliers
O.S. support: Windows2000/XP/2003/
and Linux 2.4x, 2.6x
RoHS
Serial ATA ll
3.0 Gbps
Serial ATA ll
3.0 Gbps
HDD 0
HDD 1
HDD 5
Port
Multiper
RAID 0,1,0+1,5
75mm
54mm
22mm
5mm
/