AxonKids Babyfix base User manual

Brand: AxonKids

Model: Babyfix base

Category: Car seat

Type: User manual

AxonKids Babyfix base is a safe and reliable child seat base designed for babies weighing up to 13kg. It has been tested and approved according to ECE R44 / 04 regulations, and can be used in all positions of the car that are approved for ISOFIX holding devices. The base can be attached to the car seat using either the car's seatbelts or the ISOFIX holding system, depending on your car's specifications.

The Babyfix base has a number of features that make it easy to use and adjust. The ISOFIX holders can be folded out or in, depending on whether or not you are using them. The support leg can be adjusted to ensure that the base is fully supported by the car floor, and the belt lock-off helps to keep the car seatbelt in place.

Babyx base

Instruction manual

Tested and approved according to

ECE R44 / 04

Base

For babies weighing up to 13kg

Introduction

ank you for choosing a child seat base from Axon Kids. e team developing

Babyx have more than 30 years of experience in child safety products between

us, and we have done our outmost to make this product as safe as possible.

is base has been developed to be used both with ISOFIX-system and with

fastening manually by the belts. Babyx base has a ”semi-universal group 0+” ap-

proval for a child who weighs up to 13 kg and approved ISO/R1 holders.

Babysx base has an ISOFIX holding device and is approved

according to ECE R44/04 regulations.

Babyx base could be used in all positions of the car that is

approved for ISOFIX holding device.

When the base is used together with the car belt make sure

that the car is approved according to ECE 16 regulations.

Do not attempt to dismantle, modify or add to any part of

the child seat or change the way its harness or your car seat

belts are made or used. e ocial approval is no longer valid

if modications are made.

Keep these assembly instructions thru out the lifetime of the

base.

Do not attempt to assembly the base with the ISOFIX hold-

ing system without using the leading covers.

Read the instruction manual carefully before you

assembly the base. Otherwise you risk to seri-

ously harm your child.

The parts of the base

1. Backrest

2. ISOFIX guiding arms

3. Fixationhooks for the car belt

4. Leading covers for ISOFIX

5. Releasebutton for childseat

6. Adjustment button for the supportleg

7. Supportleg

8. Belt lock-off

Assemble the base

1. Attach the belt lock-o to the

backsupport. Insert the two legs of the

back support and xate to the base

with the screws included in the box.

2. If ISOFIX holding system should

be used you need to fold them out ac-

cording to picture above.

Warning! Dont unfold the ISO-

FIX holders if you are not going to use

them. is could create damages to

your car interior, if they are not used

fold them back according to pic 3.

Attaching base to the car seat

You could use either the belts of the

car or the ISOFIX holding system to

xate the base to the car seat, depen-

dent of your car specications. If you

are uncertain of which system to use

check your car manual for information.

1. Pull the car seatbelt under the

hooks as shown in picture 1. Lock the

belt, picture 2. en press the base unit

into the seat and pull the car seatbelt

as far as it will go then attach the belt

lock-o. e belt lock shall always be

on the same side as the car buckle.

2. Extend the leg by pushing the

release button and adjust the length

so that it is fully supported by the car

oor, pic 3. Ensure that the leg is stand-

ing rmly against the oor and that the

base is not able to slip.

3. e base should look like in pic-

ture 4 when it is assembled correct.

Using the base with ISOFIX

1. Assemble the leading covers for

the ISOFIX holding system to the car,

pic 1.

2. Extent the two ISOFIX holders

legs and assemble them into the lead-

ing covers which you assembled in rst

step, picture 2 and 3. You will know

that they are assembled when you here

a click sound. Check that the color

marking on the restraint mechanism

has changed to green, picture4, and

that the base is rmly positioned.

3. Extend the leg by pushing the

release button and adjust the length so

that it is fully supported by the car oor

(picture 5).

3. Ensure that the leg is standing

rmly against the oor and that the

base is not able to slip.

Attaching and removing baby seat

1. Press down the baby seat until

you hear a click sound. Check if the

baby seat has locked correctly by pull-

ing the handle upwards, the seat should

not detach from the base.

2. en push down the handle to

position B like in the picture to the

right.

3. To detach the baby seat from the

base push the release button and then

lift the seat upwards.

Warning! Always make sure that

your child is seated rmly when you lift

and carry your child and seat to avoid

injuries.

1 A. If the base is assembled with

ISOFIX holders then release this by

pressing down the red ISOFIX re-

straints mechanism button, picture 1,

on both sides.

1 B. If the base is assembled with

the car seatbelt, simply press the latch

on the car belt to release the belt.

2. Fold the ISOFIX holders togeth-

er into the base according to picture 3.

3. Press the release button in the leg

and push the leg upwards to bundle it

up together, picture 2.

4. Fold the leg together underneath

the base and secure it according to pic-

ture 4.

Detach the base from the car seat

Producer:

Axonkids AB

Box 188

53322 Götene

www.axonkids.com

AxonKids Babyfix base User manual

Brand: AxonKids

Model: Babyfix base

Category: Car seat

Type: User manual

Download PDF

report

AxonKids Babyfix base User manual

AxonKids Babyfix base User manual

Other documents