ASRock Rack X299 WSI/IPMI User manual

C422 WSI/IPMI

X299 WSI/IPMI

User Manual

Version 1.0

Published August 2018

Version 1.0

Published August 2018

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Rack Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished

for informational use only and subject to change without notice, and should not

be constructed as a commitment by ASRock Rack. ASRock Rack assumes no

responsibility for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock Rack does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable

for any indirect, special, incidental, or consequential damages (including damages

for loss of prots, loss of business, loss of data, interruption of business and the

like), even if ASRock Rack has been advised of the possibility of such damages

arising from any defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Rack’s Website: www.ASRockRack.com

Contact Information

If you need to contact ASRock Rack or want to know more about ASRock Rack,

you’re welcome to visit ASRock Rack’s website at www.ASRockRack.com; or you

may contact your dealer for further information.

ASRock Rack Incorporation

6F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,

Taipei City 112, Taiwan (R.O.C.)

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Unique Features 5

1.4 Motherboard Layout 6

1.5 Onboard LED Indicators 9

1.6 I/O Panel 10

1.7 Block Diagram 12

Chapter 2 Installation 13

2.1 Screw Holes 13

2.2 Pre-installation Precautions 13

2.3 Installation of Memory Modules (SODIMM) 18

2.4 Expansion Slot (PCI Express Slot) 20

2.5 Jumper Setup 21

2.6 Onboard Headers and Connectors 22

2.7 Driver Installation Guide 27

2.8 Dua LAN and Teaming Operation Guide 28

2.9 M.2_SSD (NGFF) Module Installation Guide (M2_2) 29

Chapter 3 UEFI Setup Utility 30

3.1 Introduction 30

3.1.1 UEFI Menu Bar 30

3.1.2 Navigation Keys 31

3.2 Main Screen 32

3.3 OC Tweaker Screen (for X299 WSI/IPMI only) 33

3.4 Advanced Screen 50

3.4.1 CPU Conguration 51

3.4.2 IIO Conguration 53

3.4.3 Chipset Conguration 54

3.4.4 Storage Conguration 56

3.4.5 Super IO Conguration 57

3.4.6 Serial Port Console Redirection 58

3.4.7 H/W Monitor 61

3.4.8 Intel ME Information 63

3.4.9 ACPI Conguration 64

3.4.10 USB Conguration 65

3.4.11 Instant Flash 66

3.5 Security 67

3.6 Boot Screen 68

3.7 Server Mgmt 72

3.7.1 System Event Log 73

3.7.2 BMC Network Conguration 74

3.8 Event Logs 75

3.9 Exit Screen 77

Chapter 4 Software Support 78

4.1 Install Operating System 78

4.2 Support CD Information 78

4.2.1 Running The Support CD 78

4.2.2 Drivers Menu 78

4.2.3 Utilities Menu 78

4.2.4 Contact Information 78

Chapter 5 Troubleshooting 79

5.1 Troubleshooting Procedures 79

5.2 Technical Support Procedures 81

5.3 Returning Merchandise for Service 81

C422 WSI/IPMI / X299 WSI/IPMI

PB 1

English

Chapter 1 Introduction

ank you for purchasing ASRock Rack C422 WSI/IPMI / X299 WSI/IPMI

motherboard, a reliable motherboard produced under ASRock Rack’s consistently

stringent quality control. It delivers excellent performance with robust design

conforming to ASRock Rack’s commitment to quality and endurance.

In this manual, chapter 1 and 2 contains introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contains the conguration

guide to BIOS setup and information of the Support CD.

1.1 Package Contents

• ASRock Rack C422 WSI/IPMI / X299 WSI/IPMI Motherboard

(Mini ITX Form Factor: 6.7-in x 6.7-in, 17.02 cm x17.02 cm)

• Support CD

• Quick Installation Guide

• 1 x SATA3 Cable (60cm)

• 1 x I/O Shield

• 1 x Screw for M.2 Socket

If any items are missing or appear damaged, contact your authorized dealer.

Because the motherboard specications and the BIOS soware might be updated, the con-

tent of this manual will be subject to change without notice. In case any modications of

this manual occur, the updated version will be available on ASRock Rack website without

further notice. You may nd the latest memory and CPU support lists on ASRock Rack

website as well. ASRock Rack’s Website: www.ASRockRack.com

If you require technical support related to this motherboard, please visit our website for

specic information about the model you are using.

http://www.asrockrack.com/support/

2 3

English

1.2 Specications

C422 WSI/IPMI/ X299 WSI/IPMI

MB Physical Status

Form Factor Mini ITX

Dimension 6.7'' x 6.7'' (17.02cm x17.02 cm)

Processor System

CPU C422 WSI/IPMI:

Supports Intel® Skylake-W Processors (LGA-2066)

X299 WSI/IPMI:

Supports Intel® Skylake-X Processors (LGA-2066) (only support s i9)

Socket Single Socket R4(LGA 2066)

Chipset C422 WSI/IPMI:

Intel® C422

X299 WSI/IPMI:

Intel® X299

System Memory

Capacity - 4 x DDR4 DIMM slots

- Supports up to 64GB ECC SO-DIMM

DIMM Sizes and

Type per DIMM

Quad Channel DDR4 memory technology

C422 WSI/IPMI:

SO-RDIMM: 8GB, 4GB

ECC SO-DIMM: 8GB, 4GB

Non-ECC SO-UDIMM: 16GB, 8GB, 4GB

X299 WSI/IPMI:

SO-DIMM: 16GB, 8GB

ECC SO-DIMM: 32GB*,16GB, 8GB, 4GB

*32GB is supported by Cascadelake-X CPU only.

Frequency C422 WSI/IPMI:

SO-RDIMM: 2666/2400/2133/1866/1600MHz

ECC SO-DIMM: 2666/2400/2133/1866/1600MHz

Non-ECC SO-UDIMM: 2666/2400/2133/1866/1600MHz

X299 WSI/IPMI:

SO-DIMM: 2666/2400/2133MHz *

ECC SO-DIMM: 2666/2400/2133MHz**

*Please check our QVL before installation.

**It can be installed but no ECC function is supported.

Volt age 1.2 V

Expansion Slot

PCIe 3.0 x16 1 slot (from CPU)

C422 WSI/IPMI / X299 WSI/IPMI

2 3

English

Storage

SATA Controller C422 WSI/IPMI:

C422: 4x SATA3 6Gb/s

X299 WSI/IPMI:

X299: 4x SATA3 6Gb/s

OCuLink for U.2 1(from PCH)

Ethernet

Interface 1000 /100 /10 Mbps

LAN - 2 x RJ45 GLAN by Intel® i350

- Supports Wake-On-LAN

- Supports Energy Ecient Ethernet 802.3az

- Supports Dual LAN with Teaming function

- Supports PXE

Management

BMC Controller ASPEED AST2500 : IPMI (Intelligent Platform Management

Interface) 2.0 with Ikvm and vMedia support

IPMI Dedicated

LAN

1 x Realtek RTL8211E for dedicated management GLAN

Features - Watch Dog

- NMI

Graphics

Controller ASPEED AST2500

VRAM DDR4 4GB

Rear Panel I/O

VGA Port 1 x D-Sub

USB 3.0 Port 2

LAN Port - RJ45:2+1(IPMI)

- LAN Ports with LED (ACT/LINK LED and SPEED LED)

Internal Connector

Auxiliary Panel

Header

1 (include chassis intrusion, location button & LED, and front

LAN LED)

COM Header 1 (from SIO)

Speaker 1(4 pin)

TPM Header 1

IPMB Header 1

SGPIO Header 1

Fan Header 3 Fans (1CPU/2 system)

ATX Power 1x (24-pin) + 1x (8-pin) )

USB 3.0 Header 1 ( support 2 USB3.0)

ClearCMOS 1

NMI Button 1

Front Panel 1(rst, pwrbtn, hddled, pwrled)

4 5

English

M.2 1 (Bottom side, only supports 2280, PCIE(x4)/SATA3 6.0 Gb/s)

System BIOS

BIOS Ty pe 256Mb AMI UEFI Legal BIOS

BIOS Features - Plug and Play (PnP)

- ACPI 2.0 Compliance Wake Up Events

- SMBIOS 2.8.0 Support

- ASRock Rack Instant Flash

Hardware Monitor

Temperature - CPU Temperature Sensing

- System Temperature Sensing

- Card side Temperature Sensing

Fan - CPU/Rear/Front Fan Tachometer

- CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by

CPU Temperature)

- CPU/Rear/Front Fan Multi-Speed Control

Volt age Voltage Monitoring: Vcore, VCCSA, VCCIO, VCCMAB,

VCCMCD, 3v, 5v, 12v,1.05V_PCH, +BAT, 3VSB, 5VSB, 5V_

Dual

Support OS

OS X299 WSI/IPMI:

Microso® Windows®

- Windows 10 (64 bit)

C422 WSI/IPMI:

Microso® Windows®

- Windows 10 (64 bit)

Linux®

- RedHat Enterprise Linux Server 6.9 (64 bit) / 7.3 (64 bit) /

7.5 (64 bit)

- SUSE Enterprise Linux Server 11 SP4 (64 bit) / 12 SP2 (64 bit) /

12 SP3 (64 bit)

- Ubuntu 16.04 (64 bit) / 16.10 (64 bit)

Virtual

- VMWare® Workstation 12

- Citrix XenServer 7.5

- Win hyper-V Server 2016

* Please refer to our website for the latest OS support list.

* On Ubuntu 16.04 (64bit) system, Intel Raid mode only supports UEFI BOOT.

C422 WSI/IPMI / X299 WSI/IPMI

4 5

English

is motherboard supports Wake from on Board LAN. To use this function, please make

sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager

> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is

enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard

LAN1&2 can wake up S5 under OS.

If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-

dows® Hardware Quality Lab (WHQL) certication tests. If you install the drivers only, it

will pass the WHQL tests.

1.3 Unique Features

ASRock Rack Instant Flash is a BIOS ash utility embedded in Flash ROM. is con-

venient BIOS update tool allows you to update system BIOS without entering operat-

ing systems rst like MS-DOS or Windows®. With this utility, you can press the <F6>

key during the POST or the <F2> key to enter into the BIOS setup menu to access

ASRock Rack Instant Flash. Just launch this tool and save the new BIOS le to your

USB ash drive, oppy disk or hard drive, then you can update your BIOS only in a

few clicks without preparing an additional oppy diskette or other complicated ash

utility. Please be noted that the USB ash drive or hard drive must use FAT32/16/12

le system.

Environment

Temperature Operation temperature: 10°C ~ 35°C / Non operation

temperature: -40°C ~ 70°C

NOTE: Please refer to our website for the latest specications.

6 7

English

1.4 Motherboard Layout

Front View

1

DDR4_A1 (64 bit, 260-pin module)

17.0cm (6.7 in)

10

12

11

13

14

15

16

17

19

20

21

DDR4_B1 (64 bit, 260-pin module)

DDR4_D1 (64 bit, 260-pin module)

DDR4_C1 (64 bit, 260-pin module)

VGA1

3

IPMI

LAN

USB 3.0

T: USB2

B: USB1

LAN1 LAN2

PCIE4

SATA_0

SATA_1

SATA_2

SATA_3

FRNT_FAN2 FRNT_FAN1

OCU1

AUX_PANEL1

1

USB3_3_4

HDLED RESET

PLED PWRBTN

PANEL1

1

SPEAKER1

VROC1

1

TPMS1

1

IPMB_1

1

PSU_SMB1

BATTERY

BMC_DIS1

COM1

1

11

ATXPWR1

ATX12V1

CPU_FAN1

C422 WSI

12

NMI_BTN1

4567

8

9

22

23

24

CPU1

SATA_SGPIO1

1

18

C422 WSI/IPMI / X299 WSI/IPMI

6 7

English

Rear View

M2_2

NUT110_2

25

8 9

English

No. Description

1 Intelligent Platform Management Bus header (IPMB1_1)

2 COM Port Header (COM1)

3 Enable/Disable BMC Jumper (BMC_DIS1)

4 PSU SMBus Header (PSU_SMB1)

5 Non Maskable Interrupt Button (NMI_BTN1)

6 ATX Power Connector (ATXPWR1)

7 CPU Fan Connector (CPU_FAN1)

8 ATX 12V Power Connector (ATX12V1)

9 2 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_B1)

10 Front Fan Connector (FRNT_FAN2)

11 Front Fan Connector (FRNT_FAN1)

12 2 x 260-pin DDR4 SO-DIMM Slots (DDR4_C1, DDR4_D1)

13 OCuLink x4 Connector (OCU1)

14 USB 3.0 Header (USB3_3_4)

15 Auxiliary Panel Header (AUX_PANEL1)

16 Chassis Speaker Header (SPEAKER1)

17 System Panel Header (PANEL1)

18 SATA SGPIO Connector (SATA_SGPIO1)

19 Virtual RAID On CPU Header (VROC1)

20 SATA3 Connector (SATA_3)

21 SATA3 Connector (SATA_2)

22 SATA3 Connector (SATA_1)

23 SATA3 Connector (SATA_0)

24 TPM Header (TPMS1)

25 M.2 Socket (M2_2) (Type 2280)

C422 WSI/IPMI / X299 WSI/IPMI

8 9

English

1.5 Onboard LED Indicators

1

ATXPWR1

C422 WSI

1

2

3

4

1

No. Item Status Description

1CPU_FAN_LED1 Amber CPU_FAN1 failed

2FFAN_LED2 Amber FRNT_FAN2 failed

3FFAN_LED1 Amber FRNT_FAN1 failed

4 SB_PWR1 Green STB PWR ready

10 11

English

1.6 I/O Panel

3

1

2

5

4

No. Description No. Description

1VGA Port (VGA1) 4 LAN RJ-45 Port (LAN1)**

2 LAN RJ-45 Port (IPMI_LAN)* 5 LAN RJ-45 Port (LAN2)**

3 USB 3.0 Ports (USB3_1_2)

LAN Port LED Indications

*ere are two LED next to the LAN port. Please refer to the table below for the LAN port

LED indications.

Dedicated IPMI LAN Port LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10M bps connection or no

link

Blinking Yellow Data Activity Yel low 100M bps connection

On Link Green 1G bps connection

ACT/LINK LED

SPEED LED

LAN Port

C422 WSI/IPMI / X299 WSI/IPMI

10 11

English

**ere are two LEDs on each LAN port. Please refer to the table below for the LAN port

LED indications.

LAN Port LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10M bps connection or no

link

Blinking Yellow Data Activity Yel low 100M bps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

12 13

English

1.7 Block Diagram

C422 WSI/IPMI / X299 WSI/IPMI

12 13

English

Chapter 2 Installation

This is a mini ITX form factor (6.7'' x 6.7'', 17.02 cm x 17.02 cm) motherboard. Before

you install the motherboard, study the conguration of your chassis to ensure that the

motherboard ts into it.

2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the chassis.

Do not over-tighten the screws! Doing so may damage the motherboard.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components or

change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any components.

2. To avoid damaging the motherboard’s components due to static electricity, NEVER

place your motherboard directly on the carpet or the like. Also remember to use a

grounded wrist strap or touch a safety grounded object before you handle the compo-

nents.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-static pad or in

the bag that comes with the component.

5. When placing screws into the screw holes to secure the motherboard to the chassis,

please do not over-tighten the screws! Doing so may damage the motherboard.

Before you install or remove any component, ensure that the power is switched o or the

power cord is detached from the power supply. Failure to do so may cause severe damage to

the motherboard, peripherals, and/or components.

Make sure to unplug the power cord before installing or removing the motherboard. Failure

to do so may cause physical injuries to you and damages to motherboard components.

14 15

English

2.3 Installing the CPU

1. Before you insert the 2066-Pin CPU into the socket, please check if the PnP cap is on the

socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not

force to insert the CPU into the socket if above situation is found. Otherwise, the CPU

will be seriously damaged.

2. Unplug all power cables before installing the CPU.

A

B

A

B

1

2

3

Page is loading ...

ASRock Rack X299 WSI/IPMI User manual

This manual is also suitable for

ASRock Rack X299 WSI/IPMI User manual

Related papers

Other documents