ASRock Rack EPYC3451D4I2-2T User manual

Brand: ASRock Rack

Model: EPYC3451D4I2-2T

Type: User manual

EPYC3451D4I2-2T

EPYC3351D4I2-2T

User Manual

Version 1.0

Published August 2020

Version 1.0

Published August 2020

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Rack Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished

for informational use only and subject to change without notice, and should not

be constructed as a commitment by ASRock Rack. ASRock Rack assumes no

responsibility for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock Rack does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable

for any indirect, special, incidental, or consequential damages (including damages

for loss of prots, loss of business, loss of data, interruption of business and the

like), even if ASRock Rack has been advised of the possibility of such damages

arising from any defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Rack’s Website: www.ASRockRack.com

Contact Information

If you need to contact ASRock Rack or want to know more about ASRock Rack,

you’re welcome to visit ASRock Rack’s website at www.ASRockRack.com; or you

may contact your dealer for further information.

ASRock Rack Incorporation

6F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,

Taipei City 112, Taiwan (R.O.C.)

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Unique Features 5

1.4 Motherboard Layout 6

1.5 Onboard LED Indicators 8

1.6 I/O Panel 9

1.7 Block Diagram 11

Chapter 2 Installation 12

2.1 Screw Holes 12

2.2 Pre-installation Precautions 12

2.3 Installation of Memory Modules (DIMM) 13

2.4 Expansion Slots (PCI Express Slots) 15

2.5 Onboard Headers and Connectors 16

2.6 ATX PSU / DC-IN Power Connections 24

2.7 Unit Identication purpose LED/Switch 25

2.8 Driver Installation Guide 25

2.9 Dual LAN and Teaming Operation Guide 26

2.10 M.2 SSD Module Installation Guide 27

Chapter 3 UEFI Setup Utility 28

3.1 Introduction 28

3.1.1 UEFI Menu Bar 28

3.1.2 Navigation Keys 29

3.2 Main Screen 30

3.3 Advanced Screen 31

3.3.1 CPU Conguration 32

3.3.2 Chipset Conguration 33

3.3.3 Storage Conguration 35

3.3.4 ACPI Conguration 36

3.3.5 USB Conguration 37

3.3.6 Super IO Conguration 38

3.3.7 Serial Port Console Redirection 39

3.3.8 H/W Monitor 43

3.3.9 PSP Firmware Versions 44

3.3.10 AMD CBS 45

3.3.11 Instant Flash 46

3.4 Server Mgmt 47

3.4.1 System Event Log 48

3.4.2 BMC Network Conguration 49

3.4.3 BMC Tools 51

3.5 Security 52

3.5.1 Key Management 53

3.6 Boot Screen 57

3.6.1 CSM Parameters 59

3.7 Event Logs 61

3.8 Exit Screen 63

Chapter 4 Software Support 64

4.1 Install Operating System 64

4.2 Support CD Information 64

4.2.1 Running The Support CD 64

4.2.2 Drivers Menu 64

4.2.3 Utilities Menu 64

4.2.4 Contact Information 64

Chapter 5 Troubleshooting 65

5.1 Troubleshooting Procedures 65

5.2 Technical Support Procedures 67

5.3 Returning Merchandise for Service 67

EPYC3451D4I2-2T / EPYC3351D4I2-2T

PB 1

English

Chapter 1 Introduction

ank you for purchasing ASRock Rack EPYC3451D4I2-2T / EPYC3351D4I2-2T

motherboard, a reliable motherboard produced under ASRock Rack’s consistently

stringent quality control. It delivers excellent performance with robust design

conforming to ASRock Rack’s commitment to quality and endurance.

In this manual, chapter 1 and 2 contains introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contains the conguration

guide to BIOS setup and information of the Support CD.

1.1 Package Contents

• ASRock Rack EPYC3451D4I2-2T / EPYC3351D4I2-2T Motherboard

(Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.02 cm x 17.02 cm)

• Quick Installation Guide

• 1 x Oculink to 4 SATA Cable (60cm) (Optional)

• 1 x Oculink to 8 SATA Cable (60cm) (Optional)

• 1 x SATA3 Cable (60cm)

• 1 x SATA Power Cable (80cm)

• 1 x ATX 4P to 24P Power Cable (8cm)

• 1 x I/O Shield

• 1 x Screw for M.2 Socket

If any items are missing or appear damaged, contact your authorized dealer.

Because the motherboard specications and the BIOS soware might be updated, the con-

tent of this manual will be subject to change without notice. In case any modications of

this manual occur, the updated version will be available on ASRock Rack website without

further notice. You may nd the latest memory and CPU support lists on ASRock Rack

website as well. ASRock Rack’s Website: www.ASRockRack.com

If you require technical support related to this motherboard, please visit our website for

specic information about the model you are using.

http://www.asrockrack.com/support/

2 3

English

1.2 Specications

EPYC3451D4I2-2T / EPYC3351D4I2-2T

MB Physical Status

Form Factor Mini-ITX

Dimension 6.7'' x 6.7'' (17.02 cm x 17.02 cm)

Processor System

CPU Support AMD EPYC™ Embedded 3000 Series Processors

Chipset Soc

System Memory

Capacity - 4 x 288-pin DDR4 SDRAM DIMM slots

- Support up to 256GB DDR4 ECC/UDIMM, RDIMM,

LR-DIMM

Type - Dual Channel DDR4 memory technology

- Support DDR4 ECC/UDIMM, RDIMM, LR-DIMM

Volt age 1.2V

DIMM Size per

DIMM

- ECC/UDIMM: 64GB, 32GB, 16GB, 8GB, 4GB

- RDIMM/LR-DIMM: 128GB, 64GB, 32GB, 16GB, 8GB, 4GB

DIMM

Frequency

- ECC/UDIMM: 2133/2400/2666 MHz

- RDIMM/LR-DIMM: 2133/2400/2666 MHz

*e max speed may vary based on SoC SKU.

Expansion Slot

PCIe 3.0 x 16

SLOT7: Gen3 x16 link

M.2 Slot 1 (2280, supports PCIe 3.0 x4 and SATA3)

Storage

SATA Controller

14 SATA 6Gb/s (8 from OCulink 8i, 4 from OCulink 4i, 2 from

SATA 7-pin*, 1 from M.2*)

* One of the SATA 7-pin connectors will be disabled when installing a M.2

SATA device.

OCuLink for U.2

1 OCulink 8i (PCIe3.0 x8)

1 OCulink 4i (PCIe3.0 x4)

Ethernet

Interface 10000/1000 Mbps

LAN Controller - 2 x RJ45 10GLAN by Intel® X710-AT2

- Supports Wake-On-LAN

- Supports Energy Ecient Ethernet 802.3az

- Supports Dual LAN with Teaming function

- Supports PXE

- LAN1 Supports NCSI

Management

BMC Controller ASPEED AST2500 : IPMI (Intelligent Platform Management

Interface) 2.0 with ikvm and vMedia support

IPMI Dedicated

GLAN 1 x Realtek RTL8211E for dedicated management LAN

EPYC3451D4I2-2T / EPYC3351D4I2-2T

2 3

English

Features Watch Dog

Graphics

Controller ASPEED AST2500

Rear Panel I/O

VGA Port D-sub x 1

Lan Port

- 2 x 10GLAN RJ45(by Intel® X710-AT2 )

- 1 x RJ45 Dedicated IPMI LAN port

- LAN Ports with LED (ACT/LINK LED and SPEED LED)

UID Button 1

USB 3.2 Gen1 2

Internal Connector

COM Header 1

M.2 1 x M-Key (PCIe3.0 x4 or SATAIII 6.0 Gb/s); Supports 2280

form factor

Front Panel 1

Auxiliary Panel

Header 1 (includes chassis intrusion, 2 front LAN LED, system LED)

TR1 Header 1

IPMB Header 1

PSU_SMB1 1

USB 3.2 Gen1

Header 1 (supports 2 USB 3.2 Gen1 ports)

Fan Header 3

ATX Power 1 x (4-pin) + 1 x (8-pin) support 12V DC-IN

SATA Power 1 (for DC-IN mode)

*Caution: Misconnection may permanently damage the motherboard.

ClearCMOS 1 (short pad)

SATA SGPIO 2

CPU_HSBP1 1

FanFail LED 3

System BIOS

BIOS Type 16MB AMI UEFI Legal BIOS

BIOS Features

- Plug and Play (PnP)

- ACPI 2.0 Compliance Wake Up Events

- SMBIOS 2.8 Support

- ASRockRack Instant Flash

Hardware Monitor

Temperature - CPU/DDR Temperature Sensing

- MB/Card Side Temperature Sensing

Fan

- Fan Tachometer

- Fan Multi-Speed Control

- CPU Quiet Fan (Allow Chassis Fan Speed Auto-Adjust by

CPU Temperature)

4 5

English

Volt age Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,

+1.1V,+1.0V, +BAT, 3VSB, 5VSB

Support OS

OS Windows:

- Windows Server 2019

Linux:

- RedHat Enterprise Linux Server 7.4 (64bit) / 7.6 (64 bit)

- CentOs 7.4 (64 bit) / 7.6 (64 bit)

- UBuntu 18.04 (64 bit)

* Please refer to our website for the latest OS support list.

Environment

Temperature Operation temperature: 10°C ~ 35°C / Non operation

temperature: -40°C ~ 70°C

*Install a CPU Fan when the airow through the heatsink is below 2CFM.

* For detailed product information, please visit our website: http://www.asrockrack.com

is motherboard supports Wake from on Board LAN. To use this function, please make

sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager

> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is

enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard

LAN1&2 can wake up S5 under OS.

If you install Intel® LAN utility, this motherboard may fail Windows® Hardware Quality

Lab (WHQL) certication tests. If you install the drivers only, it will pass the WHQL tests.

EPYC3451D4I2-2T / EPYC3351D4I2-2T

4 5

English

1.3 Unique Features

ASRock Instant Flash is a BIOS ash utility embedded in Flash ROM. is conve-

nient BIOS update tool allows you to update system BIOS without entering operating

systems rst like MS-DOS or Windows®. With this utility, you can press the <F6> key

during the POST or the <F2> key to enter into the BIOS setup menu to access ASRock

Rack Instant Flash. Just launch this tool and save the new BIOS le to your USB ash

drive, oppy disk or hard drive, then you can update your BIOS only in a few clicks

without preparing an additional oppy diskette or other complicated ash utility.

Please be noted that the USB ash drive or hard drive must use FAT32/16/12 le

system.

6 7

English

1.4 Motherboard Layout

DDR4_B1 (64 bit, 288-pin module, Blue)DDR4,

DDR4_A1 (64 bit, 288-pin module,DDR4, Blue)

17.0cm (6.7 in)

FAN2

IPMB_1

DDR4_C1 (64 bit, 288-pin module, Blue)DDR4,

DDR4_D1 DDR4, Blue)(64 bit, 288-pin module,

PSU_SMB1

FAN3

BAT1

VGA1

UID1

FAN1

ATXPWR1

ATX12V1

OCU1

PCIE7PCIE7

M2_1

NUT80

HDDPWR1

SATA _4

SATA_5

SATA_SGPIO2

PANEL1

HDLED RESET

PLED PWRBTN

AUX_PANEL1

USB 3.2 Gen1

T: USB2

B: USB1

IPMI

LAN

17.0cm (6.7 in)

ASPEED

AST2500

145

23 20

(SATAPower)

OCU2_3

OCU4_5

CPU1_HSBP1

SATA_SGPIO1

USB3_3_4

COM1

Intel

X710-AT2

LAN1 LAN2

(NCSI)

Super

I/O

BMC

F/W

TPM1

T 1

EPYC3451D4I2-2T / EPYC3351D4I2-2T

6 7

English

No. Description

1 System Fan Connector (FAN2)

2 Intelligent Platform Management Bus Header (IPMB_1)

3 ATX 12V Power Connector (ATX12V1)

4 ATX 4-PIN Power Connector (ATXPWR1 (ATX 24pin-to-4pin))***

5PSU SMBus (PSU_SMB1)

6 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)*

7 System Fan Connector (FAN3)

8 System Fan Connector (FAN1)

9 CPU HP-SMBus Connector (CPU1_HSBP1)

10 OCuLink x4 Connector (OCU1)

11 OCuLink x8 Connector (OCU2_3)

12 OCuLink x8 Connector (OCU4_5)

13 SATA3 Connector (SATA_5)**

14 SATA3 Connector (SATA_4)

15 2 x 288-pin DDR4 DIMM Slots (DDR4_C1, DDR4_D1)*

16 SATA Power Connector (HDDPWR1)***

17 Auxiliary Panel Header (AUX_PANEL1)

18 System Panel Header (PANEL1)

19 ermal Sensor Header (TR1)

20 USB 3.2 Gen1 Header (USB3_3_4)

21 COM Port Header (COM1)

22 M.2 Socket (M2_1) (Type 2280)**

23 Clear CMOS Pad (CLRMOS1)

24 SATA SGPIO Connector (SATA_SGPIO1)

25 SATA SGPIO Connector (SATA_SGPIO2)

26 TPM Header (TPM1)

*For DIMM installation and conguration instructions, please see p.14 (Installation of Memory Modules

(DIMM)) for more details.

** If M2_1 is occupied by a SATA-type M.2 device, SATA_5 will be disabled.

***Caution: Misconnection between the ATXPWR1 and the HDDPWR1 connectors may permanently damage

the motherboard.

8 9

English

1.5 Onboard LED Indicators

DDR4_B1 (64 bit, 288-pin module, Blue)DDR4,

DDR4_A1 (64 bit, 288-pin module,DDR4, Blue)

DDR4_C1 (64 bit, 288-pin module, Blue)DDR4,

DDR4_D1 DDR4, Blue)(64 bit, 288-pin module,

No. Item Status Description

1LED_FAN2 Amber FAN2 failed

2 SB_PWR1 Green STB PWR ready

3LED_FAN3 Amber FAN3 failed

4LED_FAN1 Amber FAN1 failed

5BMC_LED1 Green BMC heartbeat LED

EPYC3451D4I2-2T / EPYC3351D4I2-2T

8 9

English

1.6 I/O Panel

No. Description No. Description

1 UID Switch/LED (UID1) 4 VGA Port (VGA1)

2 USB 3.1 Gen1 Ports (USB3_1_2) 5 10G LAN RJ-45 Port (LAN1)**

3 Dedicated IPMI LAN Port* 6 10G LAN RJ-45 Port (LAN2)**

LAN Port LED Indications

*ere are two LED next to the LAN port. Please refer to the table below for the LAN port

LED indications.

Dedicated IPMI LAN Port LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10M bps connection or no

link

Blinking Yellow Data Activity Yel low 100M bps connection

On Link Green 1G bps connection

ACT/LINK LED

SPEED LED

LAN Port

10 11

English

**ere are two LEDs on each LAN port. Please refer to the table below for the LAN port

LED indications.

10G LAN Port (LAN1, LAN2) LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 100Mbps connection or

no link

Blinking Yellow Data Activity Yellow 1Gbps connection

On Link Green 10Gbps connection

ACT/LINK LED SPEED LED

LAN Port

ACT/LINK LED SPEED LED

EPYC3451D4I2-2T / EPYC3351D4I2-2T

10 11

English

1.7 Block Diagram

ASPEED

AST2500

PCIeUSB

MAC

UART

RTL

8211E

MAC

VGA

SPI

D-Sub

BIOS

Switch

NCT6779D-R

DDR4

AMD EPYC™

Embedded

3000 Series

TDP: max. 100W

X710

-AT2

SLOT7 x16

LPC

COM port

DDR4

Switch

USB

HUB

12 13

English

Chapter 2 Installation

This is a Mini-ITX form factor (6.7'' x 6.7'', 17.0 cm x 17.0 cm) motherboard. Before

you install the motherboard, study the conguration of your chassis to ensure that the

motherboard ts into it.

2.1 Screw Holes

Place screws into the holes indicated by circles to secure the motherboard to the chassis.

2.2 Pre-installation Precautions

Take note of the following precautions before you install motherboard components or

change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any components.

2. To avoid damaging the motherboard’s components due to static electricity, NEVER

place your motherboard directly on the carpet or the like. Also remember to use a

grounded wrist strap or touch a safety grounded object before you handle the compo-

nents.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-static pad or in

the bag that comes with the component.

5. When placing screws into the screw holes to secure the motherboard to the chassis,

please do not over-tighten the screws! Doing so may damage the motherboard.

Make sure to unplug the power cord before installing or removing the motherboard. Failure

to do so may cause physical injuries to you and damages to motherboard components.

Do not over-tighten the screws! Doing so may damage the motherboard.

Before you install or remove any component, ensure that the power is switched o or the

power cord is detached from the power supply. Failure to do so may cause severe damage to

the motherboard, peripherals, and/or components.

EPYC3451D4I2-2T / EPYC3351D4I2-2T

12 13

English

2.3 Installation of Memory Modules (DIMM)

is motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and

supports Dual Channel Memory Technology.

Dual Channel Memory Conguration

Priority DDR4_A1

(Blue)

DDR4_B1

(Blue)

DDR4_C1

(Blue)

DDR4_D1

(Blue)

1Populated Populated

2Populated Populated Populated Populated

*Since installing three memory modules is NOT supported on this motherboard, we suggest not using

this conguration.

1. For dual channel conguration, you always need to install identical (the same brand,

speed, size and chip-type) DDR4 DIMM pairs.

2. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot;

otherwise, this motherboard and DIMM may be damaged.

3. Please install the memory module on CH0_A1 for the rst priority.

4. To activate Dual Channel Memory Technology, please follow the “Dual Channel Memory

Conguration” table below.

e DIMM only ts in one correct orientation. It will cause permanent damage to the

motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

Page is loading ...

ASRock Rack EPYC3451D4I2-2T User manual

ASRock Rack EPYC3451D4I2-2T User manual

ASRock Rack EPYC3451D4I2-2T User manual

Related papers

Other documents