ASRock Rack EPYCD8 User manual

EPYCD8

EPYCD8-2T

EPYCD8-2T/R32

EPYCD8/R32

User Manual

Version 1.0

Published August 2019

Version 1.0

Published August 2019

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or translated

in any language, in any form or by any means, except duplication of documentation by the

purchaser for backup purpose, without written consent of ASRock Rack Inc.

Products and corporate names appearing in this documentation may or may not be

registered trademarks or copyrights of their respective companies, and are used only for

identication or explanation and to the owners’ benet, without intent to infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock Rack. ASRock Rack assumes no responsibility

for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock Rack does not provide

warranty of any kind, either expressed or implied, including but not limited to the implied

warranties or conditions of merchantability or tness for a particular purpose.

In no event shall ASRock Rack, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for loss of

prots, loss of business, loss of data, interruption of business and the like), even if ASRock

Rack has been advised of the possibility of such damages arising from any defect or error

in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Rack’s Website: www.ASRockRack.com

Contact Information

If you need to contact ASRock Rack or want to know more about ASRock Rack, you’re

welcome to visit ASRock Rack’s website at www.ASRockRack.com; or you may contact

your dealer for further information.

ASRock Rack Incorporation

6F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,

Taipei City 112, Taiwan (R.O.C.)

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Unique Features 6

1.4 Motherboard Layout 7

1.5 Onboard LED Indicators 10

1.6 I/O Panel 12

1.7 Block Diagram 14

Chapter 2 Installation 15

2.1 Screw Holes 15

2.2 Pre-installation Precautions 16

2.3 Installing the CPU and Heatsink 17

2.4 Installation of Memory Modules (DIMM) 21

2.5 Expansion Slots (PCI Express Slots) 23

2.6 Jumper Setup 24

2.7 Onboard Headers and Connectors 26

2.8 Dr. Debug 32

2.9 Unit Identication purpose LED/Switch 33

2.10 Driver Installation Guide 33

2.11 M.2_SSD (NGFF) Module Installation Guide 34

Chapter 3 UEFI Setup Utility 36

3.1 Introduction 36

3.1.1 UEFI Menu Bar 36

3.1.2 Navigation Keys 37

3.2 Main Screen 38

3.3 Advanced Screen 39

3.3.1 CPU Conguration 40

3.3.2 Chipset Conguration 42

3.3.3 Storage Conguration 44

3.3.4 NVMe Conguration 45

3.3.5 ACPI Conguration 46

3.3.6 USB Conguration 47

3.3.7 Super IO Conguration 48

3.3.8 Serial Port Console Redirection 49

3.3.9 H/W Monitor 52

3.3.10 PSP Firmware Versions 54

3.3.11 Trusted Computing 55

3.3.12 iSCSI Conguration 57

3.3.13 Instant Flash 58

3.4 Server Mgmt 59

3.4.1 System Event Log 60

3.4.2 BMC Network Conguration 61

3.5 Security 63

3.5.1 Key Management 64

3.6 Boot Screen 67

3.6.1 CSM Parameters 69

3.7 Event Logs 71

3.8 Exit Screen 73

Chapter 4 Software Support 74

4.1 Install Operating System 74

4.2 Support CD Information 74

4.2.1 Running The Support CD 74

4.2.2 Drivers Menu 74

4.2.3 Utilities Menu 74

4.2.4 Contact Information 74

Chapter 5 Troubleshooting 75

5.1 Troubleshooting Procedures 75

5.2 Technical Support Procedures 77

5.3 Returning Merchandise for Service 77

EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32

PB 1

English

Chapter 1 Introduction

ank you for purchasing ASRock Rack EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 /

EPYCD8/R32 motherboard, a reliable motherboard produced under ASRock Rack’s

consistently stringent quality control. It delivers excellent performance with robust

design conforming to ASRock Rack’s commitment to quality and endurance.

In this manual, chapter 1 and 2 contains introduction of the motherboard and step-

by-step guide to the hardware installation. Chapter 3 and 4 contains the conguration

guide to BIOS setup and information of the Support CD.

1.1 Package Contents

• ASRock Rack EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32 Motherboard

(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm)

• Quick Installation Guide

• 1 x I/O Shield

• 1 x SATA3 Cable (60cm)

• 1 x Mini SAS HD to 4 SAS/SATA Cable (12G)

• 2 x Screws for M.2 Sockets

If any items are missing or appear damaged, contact your authorized dealer.

Because the motherboard specications and the BIOS soware might be updated, the con-

tent of this manual will be subject to change without notice. In case any modications of

this manual occur, the updated version will be available on ASRock Rack website without

further notice. You may nd the latest memory and CPU support lists on ASRock Rack

website as well. ASRock Rack’s Website: www.ASRockRack.com

If you require technical support related to this motherboard, please visit our website for

specic information about the model you are using.

http://www.asrockrack.com/support/

2 3

English

1.2 Specications

EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32

MB Physical Status

Form Factor ATX

Dimension 12'' x 9.6'' (30.5 cm x 24.4 cm)

Processor System

CPU EPYCD8-2T / EPYCD8:

AMD EPYC™ 7000 series processor family (Naples)

EPYCD8-2T/R32 / EPYCD8/R32:

AMD EPYC™ 7000 series processor family (Naples & Rome)

Socket Single Socket SP3 (LGA4094)

Chipset N/A

System Memory

Type - Eight Channel DDR4 memory technology

- Supports DDR4 RDIMM and LRDIMM

DIMM Size Per

DIMM

EPYCD8-2T / EPYCD8 :

- RDIMM: 32GB, 16GB, 8GB

- LRDIMM: 128GB, 64GB

EPYCD8-2T/R32 / EPYCD8/R32:

- RDIMM: 64GB*, 32GB, 16GB, 8GB

- LRDIMM: 256GB*, 128GB, 64GB

*Supported only for Rome CPU.

DIMM Frequency EPYCD8-2T / EPYCD8 :

- RDIMM: 2666/2400MHz

- LRDIMM: 2666/2400MHz

EPYCD8-2T/R32 / EPYCD8/R32:

- RDIMM: 3200*/2666/2400MHz

- LRDIMM: 3200*/2666/2400MHz

*Supported only for Rome CPU.

Volt age 1.2V

Expansion Slot

PCIe 3.0 x 16 PCIE1: Gen3 x16 link

PCIE3: Gen3 x16 link

PCIE5: Gen3 x16 link

PCIE7: Gen3 x16 link

PCIe 3.0 x 8 PCIE2: Gen3 x8 link

PCIE4: Gen3 x8 link

PCIE6: Gen3 x8 link

EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32

2 3

English

Storage

SATA Controller 9 x SATA3 6.0 Gb/s (from 2x mini SAS HD and 1x SATA DOM

port)

M.2 Slot 2(2230/2242/2260/2280/22110, SATA/PCIE(X4))

Ethernet

Interface EPYCD8-2T / EPYCD8-2T/R32:

10000/1000 /100 Mbps by Intel X550

EPYCD8 / EPYCD8/R32:

1000 /100 /10 Mbps by Intel i350

LAN Controller EPYCD8-2T / EPYCD8-2T/R32:

- 2 x RJ45 10G base-T by Intel® X550

- 1 x RJ45 Dedicated IPMI LAN port by RTL8211E

EPYCD8 / EPYCD8/R32:

- 2 x RJ45 GLAN by Intel® i350

- 1 x RJ45 Dedicated IPMI LAN port by RTL8211E

- Supports Wake-On-LAN

- Supports Energy E_cient Ethernet 802.3az

- Supports Dual LAN with Teaming function

- Supports PXE

- LAN1 supports NCSI

Management

BMC Controller ASPEED AST2500

IPMI Dedicated

GLAN

1 x Realtek RTL8211E for dedicated management GLAN

Features Watch Dog

NMI

Graphics

Controller ASPEED AST2500

VRAM DDR4 256MB

Rear Panel I/O

VGA Port 1 x D-Sub

Serial port 1 x COM port

USB 3.0 Port 2

LAN Port - 2+1 RJ45 Gigabit Ethernet LAN port

- LAN Ports with LED (ACT/LINK LED and SPEED LED)

UID 1

Internal Connector

Auxiliary Panel

Header

1 (includes chassis intrusion, location button & LED, and front

LAN LED)

TPM Header 1

4 5

English

IPMB Header 1

Fan Header 7 Fans x 6-pin (1CPU/4Front/2Rear)

ATX Power 1 x (24-pin) + 1 x (8-pin) + 1 x (4-pin) + 1 x (6-pin)(6 pin for

GPU for PCIE Slot)

USB 3.0 Header 1 (supports 2 USB 3.0 ports)

M.2 2(M2_1: 2230/2242/2260/2280, SATA/PCIE(X4);

M2_2:2230/2242/2260/2280/22110, SATA/PCIE(X4))

SATA DOM 1

OCulink 2

BMC SMB 1

SATA SGPIO 1

PSU SMB 1

TR 1

80 debug port LED 1

Speaker(4pin) 1

ClearCMOS 1

OH/FanFail LED 1 (only Fan Fail LED)

Front LED 1

System BIOS

BIOS Ty pe EPYCD8-2T / EPYCD8 :

16MB AMI UEFI Legal BIOS

EPYCD8-2T/R32 / EPYCD8/R32 :

32MB AMI UEFI Legal BIOS

BIOS Features - Plug and Play (PnP)

- ACPI 2.0 Compliance Wake Up Events

- SMBIOS 2.8 Support

- ASRock Rack Instant Flash

Hardware Monitor

Temperature - CPU Temperature Sensing

- MB/TR1/Card side Temperature Sensing

Fan - CPU/Rear/Front Fan Tachometer

- CPU Quiet Fan (Allow CPU Fan Speed Auto-Adjust by CPU

Temperature)

- CPU/Rear/Front Fan Multi-Speed Control

Volt age Voltage Monitoring: Vsoc,Vcpu, VCCM, VPPM, 3V/5V/12V,

+BAT, 3VSB, 5VSB

EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32

4 5

English

Support OS

OS Microso® Windows®

- Server 2012 R2 (64 bit)

- Server 2016 (64 bit)

Linux®

- RedHat Enterprise Linux Server 6.9 (64 bit) / 7.3 (64 bit)

- CentOS 6.9 (64 bit) / 7. 3 (64 bit)

- SUSE Enterprise Linux Server 11 SP4 (64 bit) / 12 SP2 (64 bit)

- Ubuntu 16.04 (64 bit) / 17.04 (64 bit)

- CITRIX XenServer 7.5

Virtual:

- VMWare ESXi 6.5 u1

- vSphere 6.5 u1

* Please refer to our website for the latest OS support list.

Environment

Temperature Operation temperature: 10°C ~ 35°C / Non operation

temperature: -40°C ~ 70°C

NOTE: Please refer to our website for the latest specications.

is motherboard supports Wake from on Board LAN. To use this function, please make

sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager

> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is

enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard

LAN1&2 can wake up S5 under OS.

If you install Intel® LAN utility or Marvell SATA utility, this motherboard may fail Win-

dows® Hardware Quality Lab (WHQL) certication tests. If you install the drivers only, it

will pass the WHQL tests.

6 7

English

1.3 Unique Features

ASRock Rack Instant Flash is a BIOS ash utility embedded in Flash ROM. is con-

venient BIOS update tool allows you to update system BIOS without entering operat-

ing systems rst like MS-DOS or Windows®. With this utility, you can press the <F6>

key during the POST or the <F2> key to enter into the BIOS setup menu to access

ASRock Rack Instant Flash. Just launch this tool and save the new BIOS le to your

USB ash drive, oppy disk or hard drive, then you can update your BIOS only in a

few clicks without preparing an additional oppy diskette or other complicated ash

utility. Please be noted that the USB ash drive or hard drive must use FAT32/16/12

le system.

24.4cm (9.6 in)

30.5cm (12.0 in)

AT XPWR1

2

VGA1

COM1

DDR4_D1 (64 bit , 2 88-pin module )

DDR4_C1 (64 bit , 2 88-pin module )

DDR4_B1 (64 bit , 2 88-pin module )

DDR4_A1 (64 bit , 2 88-pin module )

DDR4_E 1 (64 bit, 2 88-pin module )

DDR4_F 1 (64 bit, 2 88-pin module )

DDR4_G 1 (64 bit, 2 88-pin module )

DDR4_H1 (64 bit , 2 88-pin module )

AT X12V 1

PCIE 6

PCIE 7

3

4

5

6

8

US B 3. 0

T: USB2

B: USB1

IPMI_LAN

LAN1

LAN2

UID1

USB3_3_4

7

OCU1

OCU2

SA TA _0_3

SA TA_4_7

GFX_12V 1

PCIE 4

PCIE 5

PCIE 2

PCIE 3

PCIE 1

M2_2 M2_1

NUT30

NUT42

NUT60

NUT80

NUT30_2

NUT42_2

NUT60_2

NUT80_2

BA T1

1

AUX_P ANEL1

HDLED R ESET

PLED PWRBT N

PANEL1

1

TPMS1

1

SPEAKER1

1

T 1

R

1

IPMB_1

CHASSIS_ID 3

CHASSIS_ID 2NMI_BTN1

1 1 1

1

CHASSIS_ID 1

1

SA TA PWR1

BMC_SMB_1

SA TA _8

AS T

2500

RoHS

EPYCD8 / EPYCD8-2 T / E PYCD8-2T/R32 / E PYCD8/R32

AT X12V 2

REAR_F AN1

REAR_F AN2

CPU1_F AN1

FRNT_F AN1

FRNT_F AN2

FRNT_F AN3

FRNT_F AN 4

BM C

F/W

9

10

11

12

13

14

16

17

18

19

20

21

22

23

24

2526

27

29 28

33

34

35

36

37

38

Intel

i350/X550

LGA4094

Socket SP 3

3031

CLRMOS 1

32

1

PSU_SMB 1

1

NUT1 10_2

Dr.

Debug

1

SA TA _SGPIO1

15

(NCSI)

EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32

6 7

English

1.4 Motherboard Layout

24.4cm (9.6 in)

30.5cm (12.0 in)

AT XPWR1

2

VGA1

COM1

DDR4_D1 (64 bit , 2 88-pin module )

DDR4_C1 (64 bit , 2 88-pin module )

DDR4_B1 (64 bit , 2 88-pin module )

DDR4_A1 (64 bit , 2 88-pin module )

DDR4_E 1 (64 bit, 2 88-pin module )

DDR4_F 1 (64 bit, 2 88-pin module )

DDR4_G 1 (64 bit, 2 88-pin module )

DDR4_H1 (64 bit , 2 88-pin module )

AT X12V 1

PCIE 6

PCIE 7

3

4

5

6

8

US B 3. 0

T: USB2

B: USB1

IPMI_LAN

LAN1

LAN2

UID1

USB3_3_4

7

OCU1

OCU2

SA TA _0_3

SA TA_4_7

GFX_12V 1

PCIE 4

PCIE 5

PCIE 2

PCIE 3

PCIE 1

M2_2 M2_1

NUT30

NUT42

NUT60

NUT80

NUT30_2

NUT42_2

NUT60_2

NUT80_2

BA T1

1

AUX_P ANEL1

HDLED R ESET

PLED PWRBT N

PANEL1

1

TPMS1

1

SPEAKER1

1

T 1

R

1

IPMB_1

CHASSIS_ID 3

CHASSIS_ID 2NMI_BTN1

1 1 1

1

CHASSIS_ID 1

1

SA TA PWR1

BMC_SMB_1

SA TA _8

AS T

2500

RoHS

EPYCD8 / EPYCD8-2 T / E PYCD8-2T/R32 / E PYCD8/R32

AT X12V 2

REAR_F AN1

REAR_F AN2

CPU1_F AN1

FRNT_F AN1

FRNT_F AN2

FRNT_F AN3

FRNT_F AN 4

BM C

F/W

9

10

11

12

13

14

16

17

18

19

20

21

22

23

24

2526

27

29 28

33

34

35

36

37

38

Intel

i350/X550

LGA4094

Socket SP 3

3031

CLRMOS 1

32

1

PSU_SMB 1

1

NUT1 10_2

Dr.

Debug

1

SA TA _SGPIO1

15

(NCSI)

8 9

English

No. Description

1 PSU SMBus Header (PSU_SMB1)

2 ATX 12V Power Connector (ATX12V1)

3 ATX 12V Power Connector (ATX12V2)

4 ATX Power Connector (ATXPWR1)

5 USB 3.0 Header (USB3_3_4)

6 Rear Fan Connector (REAR_FAN1)

7 Rear Fan Connector (REAR_FAN2)

8 OCuLink x4 Connector (OCU1)

9 CPU Fan Connector (CPU1_FAN1)

10 Front Fan Connector (FRNT_FAN1)

11 OCuLink x4 Connector (OCU2)

12 M.2 Socket (M2_2) (Type 2230 / 2242 / 2260 / 2280 / 22110)

13 M.2 Socket (M2_1) (Type 2230 / 2242 / 2260 / 2280)

14 Mini-SAS HD Connector (SATA_0_3)

15 SATA SGPIO Header (SATA_SGPIO1)

16 Mini-SAS HD Connector (SATA_4_7)

17 Front Fan Connector (FRNT_FAN2)

18 Front Fan Connector (FRNT_FAN3)

19 Front Fan Connector (FRNT_FAN4)

20 Graphics 12V Power Connector (GFX_12V1)

21 Clear CMOS Pad (CLRMOS1)

22 Speaker Header (SPEAKER1)

23 System Panel Header (PANEL1)

24 Auxiliary Panel Header (AUX_PANEL1)

25 ermal Sensor Header (TR1)

26 TPM Header (TPMS1)

27 BMC SMBus Header (BMC_SMB_1)

28 Intelligent Platform Management Bus header (IPMB1)

29 Non Maskable Interrupt Button (NMI_BTN1)

30 Chassis ID3 Jumper (CHASSIS_ID3)

31 Chassis ID2 Jumper (CHASSIS_ID2)

32 Chassis ID1 Jumper (CHASSIS_ID1)

33 SATA DOM Power Jumper (SATAPWR1)

EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32

8 9

English

No. Description

34 SATA DOM Connector, White (SATA_8)

35 2 x 288-pin DDR4 DIMM Slots (DDR4_B1, DDR4_D1)*

36 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_C1)*

37 2 x 288-pin DDR4 DIMM Slots (DDR4_E1, DDR4_G1)*

38 2 x 288-pin DDR4 DIMM Slots (DDR4_F1, DDR4_H1)*

*For DIMM installation and conguration instructions, please see p.22 (Installation of Memory Modules

(DIMM)) for more details.

10 11

English

1.5 Onboard LED Indicators

DDR4_D1 (64 bit , 2 88-pin module )

DDR4_C1 (64 bit , 2 88-pin module )

DDR4_B1 (64 bit , 2 88-pin module )

DDR4_A1 (64 bit , 2 88-pin module )

DDR4_E 1 (64 bit, 2 88-pin module )

DDR4_F 1 (64 bit, 2 88-pin module )

DDR4_G 1 (64 bit, 2 88-pin module )

DDR4_H1 (64 bit , 2 88-pin module )

NUT 1

NUT 2

NUT 3

NUT 4

NUT 5

NUT 6

NUT 7

NUT 8

RoHS

1

2

3

4

5

6

7

8

9

NUT1 10_2

1

LGA4094

Socket SP 3

1

EPYCD8 / EPYCD8-2T / E PYCD8-2T/R32 / E PYCD8/R32

EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32

10 11

English

No. Item Status Description

1FAN_LED3 Amber RAER_FAN1 failed

2FAN_LED4 Amber RAER_FAN2 failed

3FAN_LED1 Amber CPU1_FAN1 failed

4FAN_LED2 Amber FRNT_FAN1 failed

5FAN_LED7 Amber FRNT_FAN2 failed

6FAN_LED8 Amber FRNT_FAN3 failed

7FAN_LED9 Amber FRNT_FAN4 failed

8 SB_PWR1 Green STB PWR ready

9BMC_LED1 Green BMC heartbeat LED

12 13

English

1.6 I/O Panel

2

3

14

5

67

No. Description No. Description

1 UID Switch (UID1) 5 LAN RJ-45 Port (IPMI_LAN1)*

2VGA Port (VGA1) 6

EPYCD8 / EPYCD8/R32:

GLAN RJ-45 Port (LAN1)**

EPYCD8-2T / EPYCD8-2T/R32:

10G LAN RJ-45 Port (LAN1)**

3 Serial Port (COM1) 7

EPYCD8 / EPYCD8/R32:

GLAN RJ-45 Port (LAN2)**

EPYCD8-2T / EPYCD8-2T/R32:

10G LAN RJ-45 Port (LAN2)**

4 USB 3.0 Ports (USB3_1_2)

*ere are two LED next to the LAN port. Please refer to the table below for the LAN port

LED indications.

Dedicated IPMI LAN Port LED Indications

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10M bps connection or no

link

Blinking Yellow Data Activity Yel low 100M bps connection

On Link Green 1Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

EPYCD8-2T / EPYCD8 / EPYCD8-2T/R32 / EPYCD8/R32

12 13

English

**ere are two LEDs on each LAN port. Please refer to the table below for the LAN port

LED indications.

LAN Port (LAN1, LAN2) LED Indications

1G For EPYCD8 / EPYCD8/R32

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection or

no link

Blinking Yellow Data Activity O 100Mbps connection

On Link Green 1Gbps connection

10G For EPYCD8-2T / EPYCD8-2T/R32

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 100Mbps connection or

no link

Blinking Yellow Data Activity O 1Gbps connection

On Link Green 10Gbps connection

ACT/LINK LED

SPEED LED

LAN Port

14 15

English

1.7 Block Diagram

Page is loading ...

ASRock Rack EPYCD8 User manual

ASRock Rack EPYCD8 User manual

Related papers

Other documents