Chapter 2. Setting up the mouse
This chapter provides information about setting up the mouse.
Connecting the mouse to your computer
Connect the mouse cable to an available USB connector (Always On USB connector not recommended) on
your computer. You might need to wait for several seconds for your computer to detect the mouse. Then the
mouse is ready for use.
Installing the device driver
Ensure that the device driver for the mouse is installed on your computer before using the mouse.
If you have connected your computer to the Internet and Windows Update is enabled, the device driver will
be automatically installed when you connect the mouse to the computer.
You also can download the latest device driver from the Lenovo
®
Web site. Go to http://www.lenovo.com/
support/mice
. Select the entry for the mouse. Then follow the instructions on the screen to download and
install the device driver.
Uninstalling the device driver
To uninstall the device driver, do one of the following:
• If the device driver is automatically downloaded from Windows Update:
1. Click the Start button to open the Start menu. Click Windows System ➙ Control Panel. Then view
Control Panel by Category.
2. Click Hardware and Sound ➙ Device Manager. If you are prompted for an administrator password
or confirmation, type the password or provide confirmation.
3. Double-click Biometric devices to view all fingerprint devices.
4. Right-click Synaptics WBDI Fingerprint Reader - USB 061 to select Uninstall.
5. Follow the instructions on the screen to uninstall the device driver.
• If the device driver is downloaded from the Lenovo Web site:
1. Click the Start button to open the Start menu. Click Windows System ➙ Control Panel. Then view
Control Panel by Category.
2. Click Uninstall a program.
3. Right-click Synaptics WBF FP Reader to select Uninstall.
4. Follow the instructions on the screen to uninstall the device driver.
© Copyright Lenovo 2017 3