Vivo MOUNT-CR70C User manual

Brand: Vivo

Model: MOUNT-CR70C

Type: User manual

Vivo MOUNT-CR70C is a TV wall mount that provides a secure and stable way to mount a TV to a wall. It is compatible with TVs up to 99lbs and 40 to 70 inches in size, and features a range of motion that allows the TV to be tilted, swiveled, and rotated to the desired position. The mount is easy to install and comes with all the necessary hardware, including screws, anchors, and a wrench. It also includes cable covers to help keep cords organized.

Here are some of the features of the Vivo MOUNT-CR70C:

Universal compatibility: Fits most TVs from 40 to 70 inches and up to 99lbs
Full motion: Tilt, swivel, and rotate the TV to the desired position

Here are some of the features of the Vivo MOUNT-CR70C:

Universal compatibility: Fits most TVs from 40 to 70 inches and up to 99lbs
Full motion: Tilt, swivel, and rotate the TV to the desired position

Corner TV Wall Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/mount-cr70c

SKU: MOUNT-CR70C

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

TOOLS NEEDED

99lbs

(45kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

WARNING!

Phillips

Screwdriver

A (x1)

Mount

B (x2)

VESA Bracket

C (x4)

End Cover

M-F (x4)

D5 Washer

M-G (x4)

D8 Washer

M-E (x4)

M8x50

M-A (x4)

M5x14

M-B (x4)

M6x14

M-C (x4)

M6x30

M-D (x4)

M8x30

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

Drill

D (x2)

Middle Cover

E (x4)

Carriage Bolt

F (x4)

Nut

M-H (x8)

5mm

Spacer

G (x1)

Wrench

M-I (x8)

15mm

Spacer

W-B (x8)

Anchor

W-C (x8)

Washer

W-A (x8)

Screw

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

CAUTION!

DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO

MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.

com, email at [email protected], or call us at 309-278-5303.

ASSEMBLY STEPS

STEP 1

STEP 2

Remove hex bolts from the TV plate on the mount (A) using the wrench (G), then li the TV plate o the

mount.

OPTION A: Wood Stud Wall Installation

Use the mount (A) to mark mounting holes on the wall where studs are located. Use of a stud finder is

highly recommended. Using a 3/16” (4.5mm) drill bit, drill holes at least 2.2” (55mm) deep into marked

locations. Attach mount to wall using screws (W-A) with washers (W-C).

STEP 2 (Continued)

OPTION B: Concrete/Brick Wall Installation

Use the mount (A) to mark mounting holes on the wall. Using a 3/8” (10mm) drill bit, drill holes at least

2.4” (60mm) deep into marked locations. Press anchors (W-B) into holes, then attach mount to wall

using screws (W-A) with washers (W-C).

Snap middle covers (D) and end covers (C) onto wall plates.

STEP 3

STEP 4

Assemble the VESA brackets (B) to the TV plate using carriage bolts (E) and nuts (F), and tighten with

the wrench (G).

STEP 5

OPTION A: Flat Back Monitor

With TV face down on a flat surface, secure TV plate with VESA brackets to the TV using bolts

(M-A, M-B) and washers (M-F, M-G). Ensure the square cutout in the plate is positioned

towards the top of the TV.

400m m

200m m

600m m

400m m

200m m

300m m

M-A

M-B

M-F

M- G

STEP 5 (Continued)

OPTION B: Curved Back Monitor

With TV face down on a flat surface, secure TV plate with VESA brackets to the TV using bolts

(M-C, M-D, M-E), spacers (M-H, M-I) and washers (M-F, M-G). Ensure the square cutout in the

plate is positioned towards the top of the TV.

STEP 6

Hang the TV plate with TV on the mount and secure using the previously removed nuts.

Tighten with the wrench (G).

M- H

M- C

M- D

M- G

M- I

M- C

M- D

M- G

M- H

M- I

M- C

M- D

M- I

M- E

M- G

M- I

M- E

M- G

M- H

M- I

M- E

M- G

M- H

STEP 7

Spread the sides of the cable covers on the arms to remove the covers. Use the covers to

organize cables.

STEP 8

Adjust the TV to the desired position. Use the wrench (G) to adjust the tilt angle and rotation.

LAST UPDATED: 03/05/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected]

AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Vivo MOUNT-CR70C User manual

Brand: Vivo

Model: MOUNT-CR70C

Type: User manual

Here are some of the features of the Vivo MOUNT-CR70C:

Universal compatibility: Fits most TVs from 40 to 70 inches and up to 99lbs
Full motion: Tilt, swivel, and rotate the TV to the desired position

Download PDF

report

Vivo MOUNT-CR70C User manual

Vivo MOUNT-CR70C User manual

Related papers

Other documents