Highwood AD-RKCH2-ACE Operating instructions

Type
Operating instructions
1
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 1
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Weatherly Rocking Chair
Assembly Guide
1) Attach Chair Back
to Seat Using One "A"
Bolt in the Upper Hole
on Each Side.
RKCH2
12.24.16
A
x4
2) Attach Leg
Assembly to Seat
Using Two "B" Bolts in
Front and One "C" Bolt
in Rear. Attach Arm to
Back Using One "A"
Bolt.
3) Repeat on Other
Side.
B
C
x4
x2
1/4"-20 X 1.5"
1/4"-20 X 2"
1/4"-20 X 3"
BACK
SEAT
A
A
ARM ASSEMBLY
BACK
A
SEAT
B
C
ALIGN ANGLES OF
BACK AND SEAT
  • Page 1 1

Highwood AD-RKCH2-ACE Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI