What’s in the box . . .
Power cord
Soundtrack
soundbar
Grille
Feet
On-wall brackets
Subwoofer feet and screws
Soundtrack
subwoofer with cradle
(Adaptor for use in horizontal
position, wired connection only)
#2 Phillips (not supplied)
3.5 mm Cable
Remote
Paradigm, Soundtrack and associated proprietary and patented designs and technologies are registered trademarks of Paradigm
Electronics Inc. Copyright © Paradigm Electronics Inc. All rights reserved. All other trademarks are the property of their
respective owner(s). Paradigm Electronics reserves the right to change specifications and/or features without notice as
design improvements are incorporated.
Paradigm Electronics Inc.
205 Annagem Blvd., Mississauga, ON Canada L5T 2V1
REV. 100912
For more information visit www.paradigm.com/shift
Set-Up Guide
The Ocial Sound of YOU
™
Power cord
Digital optical cable
Amplied Soundbar and Wireless Subwoofer
A
B
Dual RCA cable
B C D
Your Soundtrack System is capable of learning
codes from remote controls you are using
for other sources. See manual for details.
Paradigm_Soundtrack_Set-Up_Guide_EN.indd 1 12-10-09 2:33 PM
BEFORE YOU BEGIN, READ THE SAFETY PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS INCLUDED IN THE OWNERS MANUAL.
OPTIONAL Setting up the soundbar
To nd your iOS version:
SETTINGS GENERAL ABOUT
If your version is not 4.3, upgrade now.
YES
NO
50’
or 15 Meters
Wireless Range
Wireless pairing
2 31
5
+
BASS
–
BASS
+
BASS
–
BASS
50’
or 15 Meters
Wireless Range
1
2 3 4 5
+
BASS
–
BASS
NOTE: Choose analog
OR digital connections
OPTIONAL: For wall mounting instructions, refer to Owners Manual.
3.5-mm to mobile
audio device,
not included
Connecting to source Power connection
Adjust subwoofer loundness
Analog connection to
TV (use for good audio)
Digital connection to
TV (use for best audio)
B
C
*If the soundbar Wireless Status Indicator
alternates between red and blue blinking,
pairing has failed and the process must
be repeated.
Power on, sync to subwoofer
Wireless setting Power connection Wireless status indicatorAdjust subwoofer loundness
Volume
Power
Input
Selector
Wireless
Sync
Attach the Feet Attach feet to subwoofer
for horizontal positioning
TV
Lay your soundbar face down on a soft
surface. Insert feet as shown, press rmly
until you hear a 'click'.
Attach the feet.
Your subwoofer’s LEVEL switch is set to 12 o’clock
to suit average preferences. If desired, adjust up or
down to match sound level of your speakers.
Move switch to “wireless”
setting on subwoofer.
Connect to power source.
Using the Remote or Onboard Interface. Turn Power
ON and repeatedly press Input Selector until you
hear audio. Press the Wireless Sync button to
initiate connection to subwoofer. NOTE: Within
15 seconds plug in subwoofer.
The Wireless Status Indicator on the soundbar
should blink blue for less than 30 seconds
and then go back to normal operation.
Your subwoofer’s LEVEL switch is set to 12 o’clock
to suit average preferences. If desired, adjust up or
down to match sound level of your speakers.
Connect to power source.
C
A
B
E
Feet must be
attached for heat
dissipation clearance
#2 Phillips
(not supplied)
2
*If the soundbar Wireless Status Indicator
alternates between red and blue blinking,
pairing has failed and the process must
be repeated.
Wireless status indicator
The Wireless Status Indicator on the soundbar
should blink blue for less than 30 seconds
and then go back to normal operation.
1
Power on, sync to subwoofer
Volume
Power
Input
Selector
Wireless
Sync
Using the Remote or Onboard Interface. Turn Power
ON and repeatedly press Input Selector until you
hear audio. Press the Wireless Sync button to
initiate connection to subwoofer.
50’
or 15 Meters
Wireless Range
43
Wireless settingPower connection
Move switch to “wireless”
setting on subwoofer.
Connect to power source.
D
Paradigm_Soundtrack_Set-Up_Guide_EN.indd 2 12-10-09 2:33 PM
/