Diversitech HVent-2 Specification

Type
Specification

This manual is also suitable for

Diversitech HVent-2: A low-profile, versatile vent kit for high-efficiency fossil fuel appliances. Simplify installation with its all-inclusive fittings, eliminating the need for additional parts. Its sleek design conceals both intake and exhaust pipes, enhancing the aesthetics of your home's exterior. Whether you choose a horizontal (through-wall) or vertical (through-roof) installation, the HVent-2 adapts to your needs.

Diversitech HVent-2: A low-profile, versatile vent kit for high-efficiency fossil fuel appliances. Simplify installation with its all-inclusive fittings, eliminating the need for additional parts. Its sleek design conceals both intake and exhaust pipes, enhancing the aesthetics of your home's exterior. Whether you choose a horizontal (through-wall) or vertical (through-roof) installation, the HVent-2 adapts to your needs.

VENT TERMINATION KITS
About DiversiTech
DiversiTech is North America’s largest manufacturer
of air conditioning condenser pads and a leading
supplier of components and related products
for the heating, ventilating, air conditioning, and
refrigeration (HVACR) industry.
Headquartered in Atlanta, Georgia, DiversiTech
manufactures a suite of products, which includes
a wide range of mechanical, electrical, chemical,
and structural parts for HVACR and electrical systems,
and swimming pool installations. The company
maintains manufacturing and distribution facilities
in key U.S. locations, Europe, and in the Far East.
DiversiTech has enjoyed a continued history of
successful growth and has acquired industry-
recognized brand names including Devco®
Enterprises, Wagner® Manufacturing, The Black
Pad®, Hef-T-Pad™ and Specialty Chemical.
Download an electronic version of this brochure at:
media.diversitech.com/doc/DOC32713.pdf
www.diversitech.com
DiversiTech Corporation
6650 Sugarloaf Parkway
Duluth, GA 30097
P 800.995.2222
F 678.542.3700
DOC32713
LIT-FLY-VENTS
©2013 DiversiTech Corp.
diversitech.com
Visit us online
to learn more about
Vent Termination Kits
as well as thousands
of other products.
Vent Termination Kits
All Fittings included
DiversiTech’s CVENT series
concentric vent kit includes
all ttings a contractor will
need to install the vent. No
additional ttings for outside
connections are needed.
Only piping from the vent kit
to the furnace will need to be
provided separately.
Low prole
The low prole of the HVENT
series product creates a neat
look for the vent connection.
The simple and clean looking
vent hides both the intake and
exhaust pipework.
Flexible installation
The same CVENT series vent kit
can be used in either a horizontal
(through the wall) or vertical
(through the roof) installation.
Concentric vents and termination kits make it easier to have a two-pipe
installation for high eciency furnaces. These vents simplify installation and only
require one hole through the wall or roof where the pipes terminate. Without using
these vents, the installation would require cutting two holes thorough the home
(2in or 3in depending on the furnace), one for each pipe. These vents save time
and money by reducing the amount of work required.
Horizontal vent kits for use in venting high eciency fossil fuel appliances. The low
prole kit hides the vent from view.
Exterior Wall Installation
Rooop Installation
  • Page 1 1
  • Page 2 2

Diversitech HVent-2 Specification

Type
Specification
This manual is also suitable for

Diversitech HVent-2: A low-profile, versatile vent kit for high-efficiency fossil fuel appliances. Simplify installation with its all-inclusive fittings, eliminating the need for additional parts. Its sleek design conceals both intake and exhaust pipes, enhancing the aesthetics of your home's exterior. Whether you choose a horizontal (through-wall) or vertical (through-roof) installation, the HVent-2 adapts to your needs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI