Vicon V1008-WIR-180 V1020-WIR-180 Quick start guide
- Category
- Security cameras
- Type
- Quick start guide
Vicon V1008-WIR-180 V1020-WIR-180 multi-sensor cameras offer exceptional image quality with 20MP and 8MP resolutions respectively. Experience stunning clarity and detail with these powerful cameras. Their versatile features include:
-
True WDR: Witness clear images even in challenging lighting conditions with 120dB WDR, ensuring excellent dynamic range.
-
Smart IR: Capture crisp nighttime footage with effective infrared illumination up to 98 feet (30m), providing enhanced visibility in low-light environments.
-
Triple Streaming: Benefit from the flexibility of simultaneous streaming in H.265, H.264, and MJPEG formats, allowing you to choose the optimal format for your specific needs.
Vicon V1008-WIR-180 V1020-WIR-180 multi-sensor cameras offer exceptional image quality with 20MP and 8MP resolutions respectively. Experience stunning clarity and detail with these powerful cameras. Their versatile features include:
-
True WDR: Witness clear images even in challenging lighting conditions with 120dB WDR, ensuring excellent dynamic range.
-
Smart IR: Capture crisp nighttime footage with effective infrared illumination up to 98 feet (30m), providing enhanced visibility in low-light environments.
-
Triple Streaming: Benefit from the flexibility of simultaneous streaming in H.265, H.264, and MJPEG formats, allowing you to choose the optimal format for your specific needs.
PRECAUTIONS
1. OPEN-CASE INSPECTION
2. PRODUCT STRUCTURE
3. EQUIPMENT INSTALLATION
•
Do not use the camera in extreme temperature
conditions.
Use the camera within -4
o
F - 122
o
F (-20
o
C to 50
o
C)
Air vent is required at high temperature.
•
Do not use or store the camera in humid environment.
This may cause poor image quality.
•
Do not use the camera in unstable lighting conditions.
Inconsistent lighting or flickering may cause poor image.
•
Never use the camera close to gas or oil leak.
The camera may not operate properly.
1.1 Check step
When the camera is received, check that the equipment appears to
have no obvious damage. The product packaging uses protective
material to withstand most accidental impacts in the transport
process.
Please open the product outer packing and check that accessories are
complete. See accessories list below for inspection.
2.1 Cable function
2.2 Dimensions
Step 2: Loosen the 4 screws on the metal gasket and
remove it. Removing the metal gasket may affect the
waterproof rating if the surface is uneven and cannot
provide proper pressure on the silicone pad.
Step 1: Use Allen key to remove cap on the bottom of camera.
Step 3: Loosen the 4 captive screws on the dome bubble and
open it.
Step 4: After opening the dome use the tool provided to
loosen the 4 screws and remove the bottom cover.
Step 5: Fix bottom cover in the location where the camera is
to be installed (wall or ceiling):
5-1. Place installation sticker (template) on the
installation location (wall or ceiling).
5-2. Bore 4 holes according to the marks on the
installation sticker.
5-3. Use the 4 expansion bolts provided in the
screw installation package and insert them
into the 4 holes.
5-4. Use the 4 screws provided in the screw
installation package and screw them into the
expansion bolts to fix bottom cover in the
installation location (wall or ceiling).
CAUTION: External power supply cannot be used with PoE
simultaneously or it will damage the camera.
When this camera is installed near wireless communication devices that
emit a strong electromagnetic field, irregularities, such as noise, may
appear in the image.
Name Quantity
IP camera 1
Quick installation guide 1
Accessory pack 1
Power IN(DC12V 2A/AC24V 1A)
Alarm OUT
Alarm IN
Audio OUT
Audio IN
Reset to default button
RJ45
188.4mm
Φ196mm
PT 3/4”
External Network Cable
Metal Gasket
Top cover
Main body
with modules
Bottom cover
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Right or Left
Up or Down
External Network Cable
Iron sheet
Top cover
Main body
with modules
Bottom cover
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Right or Left
Up or Down
External Network Cable
Iron sheet
Top cover
Main body
with modules
Bottom cover
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Right or Left
Up or Down
External Network Cable
Iron sheet
Top cover
Main body
with modules
Bottom cover
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Right or Left
Up or Down
Quick Installation Guide
V1008-WIR-180 and V1020-WIR-180
Multi-Sensor Cameras
Document Number: 8009-8304-20-03
Product specifications subject to change without notice. Issued: 8/19
Copyright © 2019 Vicon Industries Inc. All rights reserved.
Vicon Industries Inc.
Tel: 631-952-2288 Toll Free: 800-645-9116 Fax: 631-951-2288
24-Hour Technical Support: 800-34-VICON (800-348-4266)
UK: 44/(0) 1489-566300
www.vicon-security.com
Green
Red
XX304-20
•
Do not disassemble the camera.
There are no user serviceable part inside.
•
Do not drop the camera or apply force to it.
This may cause a malfunction.
•
Never face the camera to strong light for long periods
of time.
This may damage the CMOS sensor.
PRECAUTIONS
(continued)
CAUTION:
Apply additional water tight silicone or
equivalent sealant after installation (wall mount).
Step 6: Insert the main body with modules back into the
bottom cover. Fix them with the 4 screws previously
loosened (in step 3).
Apply
silicone
between
head of screw
and ange.
Apply continuous
bead of silicone
around the
junction of
coupling and
ange.
This product is intended to be supplied by an UL Listed Power Adapter and Limited
Power Source (LPS) or DC power source class 2 (PS2) rated (1) 12VDC, minimum
2.08A; (2) 24VAC, 50/60Hz, minimum 1.3A; (3) PoE 48Vdc, minimum 0.52A,
minimum Tma 50 degree C and the altitude of operation = 2000m. If need further
assistance with purchasing the power source, please contact to Vicon Industries Inc.
for further information.
Step 9: Retighten the 4 captive screws on the dome to
secure it in place.
Step 8: After confirming the direction, rotate the manual
easing gear (both sides) to fix the position.
4.2 Use the IP Finder to access your camera.
The IP Finder tool (Discovery tool) can be gotten from the Vicon
website.
4.6 The camera GUI will open in "Live View;" click “Setup”.
to modify settings.
4.7 Network Basic Settings:
Displays the current IP address, Subnet Mask, Default Gateway,
DNS, HTTP Port and MAC of the camera; see picture below:
4.8 System Maintenance Settings:
To update your camera default, choose Restart Camera or Factory
Default or Hardware Factory Default; see picture below:
4.3 Sample IP settings and default user name/password:
IP address: 192.168.1.168
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
User name: ADMIN
Password: 1234
4.4 Open IE browser, type IP address in the address bar,
and then press the Enter button.
4.5 You will be prompted with a pop-up window asking for
login information; type in “
ADMIN
” (case sensitive) and
“1234” (default password). Refer to picture below.
4. NETWORK OPERATION
4.1 By defaut, the camera is set to obtain an IP address via
DHCP. If your network does not have a DHCP server, run
IP Finder and click “Search;” you will find the device IP,
as shown in the picture that follows.
5. SPECIFICATIONS
These Specifications are subject to change without prior notice.
Camera
Image sensor
20MP: 4 1/1.8” 5MP CMOS
progressive sensor
8MP: 4 1/2.7” 2MP CMOS
progressive sensor
Minimum resolution
20MP: 4x (2592x1944 to 320x240)
8MP: 4x (1920x1080 to 640x360)
Lens
20MP: 4 Fixed Lenses; 5.5mm F1.8
8MP: 4 Fixed Lenses; 6.0mm F2.0
IR Effective distance 98 ft (30 m) (Smart IR)
Day and night Auto ICR
True WDR
20MP: 120dB @15 fps; 100dB @30 fps
8MP: 120dB
Electronic shutter speed Auto / Manual 1/3.75~1/10000
Gain control Auto / Manual
Backlight compensation Yes
White balance mode Auto / Manual
Privacy Masking 1 area
Image setting
Brightness, Contrast, Saturation, Sharpness, Mirror, Flip,
Corridor
Video
Video compression H.265 / H.264 / M-JPEG
Video streaming Triple Streaming
Frame rate
20MP: Up to 30 fps at 20MP
8MP: Up to 30 fps at 8MP
Network
Interface
20MP: 1000Mbps Ethernet, RJ45
8MP: 10/100/1000Mbps Ethernet, RJ45
Supported protocols
IPv4, IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP, RTSP,
RTP,SMTP, NTP,DHCP, FTP, Zero Configure
ONVIF Profile S, G, Q
Users Live Viewing/Administrator for up to 10 clients
Browsers Internet Explorer, Google Chrome, Mozilla Firefox
Event Management
Event trigger
Motion detection, 5 areas
Tampering detection
Notifications
Send/Record message via e-mail/FTP/NAS/SD card,
record JPG/mp4
General
PoE IEEE 802.3at (PoE+)
DC/AC 12VDC/24VAC terminal block
SD Card Supported
DI/DO DI*1 , DO*1
Weight 2500g
Dimension Ø 196 mm x 188.4 mm (H)
Operating Temperature -40°F ~ 140°F ( -40°C ~ 60°C )
Humidity 10% ~ 90%RH (no condensation)
Certification CE; FCC Class A
Vandal Resistant IK10
Waterproof IP66
Application SDK available for application development
External Network Cable
Iron sheet
Top cover
Main body
with modules
Bottom cover
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Right or Left
Up or Down
External Network Cable
Iron sheet
Top cover
Main body
with modules
Bottom cover
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Right or Left
Up or Down
External Network Cable
Iron sheet
Top cover
Main body
with modules
Bottom cover
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Right or Left
Up or Down
Step 7: Rotate the manual easing gear (on both sides) to
loosen and adjust the viewing direction that the
camera will monitor. The camera direction can be
adjusted up/down or right/left.
External Network Cable
Iron sheet
Top cover
Main body
with modules
Bottom cover
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Right or Left
Up or Down
External Network Cable
Iron sheet
Top cover
Main body
with modules
Bottom cover
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Manual Easing
Gear
Right or Left
Up or Down
-
1
-
2
Vicon V1008-WIR-180 V1020-WIR-180 Quick start guide
- Category
- Security cameras
- Type
- Quick start guide
Vicon V1008-WIR-180 V1020-WIR-180 multi-sensor cameras offer exceptional image quality with 20MP and 8MP resolutions respectively. Experience stunning clarity and detail with these powerful cameras. Their versatile features include:
-
True WDR: Witness clear images even in challenging lighting conditions with 120dB WDR, ensuring excellent dynamic range.
-
Smart IR: Capture crisp nighttime footage with effective infrared illumination up to 98 feet (30m), providing enhanced visibility in low-light environments.
-
Triple Streaming: Benefit from the flexibility of simultaneous streaming in H.265, H.264, and MJPEG formats, allowing you to choose the optimal format for your specific needs.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Vicon Roughneck V-CELL-HD-B Quick start guide
-
Vicon V1008-WIR-180 V1020-WIR-180 Operating instructions
-
-
-
-
-
-
Vicon Hemispheric V9360/V9360W Series Quick start guide
-
-
Other documents
-
EverFocus EHN1250 Owner's manual
-
EverFocus EBN1240-A Owner's manual
-
Mobotix MOVE 20MP Multisensor/PTZ Video Analytics Camera Installation guide
-
-
Giles WOG-20MP User manual
-
-
TOGUARD Trail Camera User manual
-
IQinVision 4K Sentinel series Installation And Operating Instructions Manual
-
REXING H2 Trail Camera User manual
-
Bushnell Impulse 119900V Operating instructions
