2. Airmar
  3. DST810 CAST App

Airmar DST810 CAST App, DST810 User manual

  • Hello! I am an AI chatbot trained to assist you with the Airmar DST810 CAST App User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CAST
™
Application
Mobile App User Guide
Patent http://www.airmar.com/patent.html
for DST810 Multisensor
D-19219-rev.1 101321-rev.1 04/08/20
1
Copyright©2020AirmarTechnologyCorp.Allrightsreserved.
All Rights Reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied,
transmitted,disseminated,downloaded,orstoredinanystoragemedium,foranypurposewithoutpriorwritten
consentofAirmar.Airmarherebygrantspermissiontodownloadasinglecopyofthismanualandofanyrevisionof
thismanualontoaharddriveorotherelectronicstoragemediumtobeviewedandtoprintonecopyofthismanual
oranyrevisionhereto,providedthatsuchelectronicorprintedcopyofthismanualorrevisionmustcontainthe
completetextofthiscopyrightnoticeandprovidedfurtherthatanyunauthorizedcommercialdistributionofthis
manualoranyrevisionheretoisstrictlyprohibited.Informationinthismanualissubjecttochangewithoutnotice.
Airmarreservestherighttochangeorimproveitsproductsandtomakechangesinthecontentwithoutobligation
to notify any person or organization of such changes. Visit the Airmar website at www.airmar.com for current
updatesandsupplementalinformationconcerningtheuseandoperationofthisandotherAirmarproducts.
2
TABLEOFCONTENTS
WARNING……………………………………………………………………………………………………………………..............................................3
INTRODUCTION.............................................................................................................................................................4
GETTINGSTARTED.........................................................................................................................................................4
NAVIGATINGAIRMARCASTAPP...................................................................................................................................5
INITIALCONNECTIONTOYOURAIRMARSENSOR.....................................................................................................5
GENERALUSENOTES.................................................................................................................................................6
DEVICEDATAPAGE—DST810SMARTTRIDUCER......................................................................................................6
INFORMATIONPAGE.................................................................................................................................................7
Customization........................................................................................................................................................7
Units.......................................................................................................................................................................7
NMEA2000®PAGE....................................................................................................................................................8
OFFSETSPAGE.........................................................................................................................................................10
SPEEDCALIBRATION................................................................................................................................................11
BasicSpeedCorrection........................................................................................................................................12
SOGMethod....................................................................................................................................................12
DistanceMethod.............................................................................................................................................13
Heel‐CorrectedSpeedCalibration.......................................................................................................................15
SOGMethod....................................................................................................................................................15
DistanceMethod.............................................................................................................................................16
AdvancedSpeedCalibrationTable......................................................................................................................18

3

WARNING
Navigation Aid Only – The Airmar® CAST ™ app is intended only as a
navigationalaidandmustneverbeconsideredareplacementforcaution,
soundjudgementandpropernavigationalskill.Itisusedtoconfigureand
displaynavigationaldatafromindividualsensors.Theuserisresponsible
fortheaccuracyofthedatausedtocalibratetheconnectedsensor.Only
officialgovernmentchartsandNTMscontainallnecessaryinformation
forsafenavigation.Asalways,thecaptainisresponsiblefortheirprudent
useandsafetyofpassengersandcrew.
4
INTRODUCTION
TheAirmarCASTappisamobileapplicationthatallowsyoutoconnectto
yourAirmarSmartTRIDUCER.Youcanviewdata,adjusttheoutputs,
programoffsets,andcalibrateyourdevice.
CASTappcommunicatesdirectlywithyourAirmarDX900+orDST810
Multisensor;itreceivesonlythedataoutputbythesensor,notall
networktraffic.
GETTINGSTARTED
CASTappisavailableforiOSandAndroiddevicesandcanbedownloaded
fromtheAppleAppStoreorGooglePlayStore.
1. GototheAppStore(iOS)orPlayStore(Android)
2. Search“Airmar”anddownloadthefreeAirmarCASTapp.
3. EnsureBluetooth®isenabledonyourdevice.CASTappuses
BluetoothLowEnergy,whichdoesnotrequirepairing.Theapp
willautomaticallysearchfordeviceswithinrange,sothere’sno
needtoopenyourdevice’sBluetoothmenu.
4. OpentheAirmarCASTapp.
AllcompatibleAirmardeviceswithinrangewillbedisplayedonthe
devicelist.Selectyourdevicefromthelisttoconnect.
Note:Makesureyou’reascloseaspossibletothedevicewhiletryingto
connect.TheBluetoothantennainaDST810isneartheprintedcap,but
therearemanythingsonaboatthatcanattenuateaBluetoothsignal.
Largeobjectslikefueltanksorbulkheadscanaffectthesignalstrength.
WaterwillalsoblockaBluetoothsignal,somakesurethedeviceisn’t
submerged.

5
NAVIGATINGAIRMARCASTAPP
INITIALCONNECTIONTOYOURAIRMARSENSOR
Oncepoweredon,theDST810willbroadcastanannouncementmessage
withoutanyfurtherinput.SimplyopentheAirmarCASTapponyour
phoneortablettoseealistofdeviceswithinrange.Thereisnoneedto
“pair”withthedevice.
Thedevicesearchpageintheappwillshowalistoftheavailablesensors.
Ifyouhaveneverconnectedtoaspecificsensorbefore,itwillbenoted
byitsmodel,suchasDST810,withanicontoshowsensortype.Ifyour
phoneortablethasconnectedtoanavailablesensorbefore,itwill
displayyourcustomizedfriendlynameandtheserialnumberinthetile.
Seepage7formoreinformationoncustomization.
Note:Tryingtomaketheinitialconnectiontoyourdeviceinacrowded
area,suchasamarina,canbedifficult.Makesureyou’reconnectingto
yourdeviceandnotanearbysensorthatisalsopoweredon.Ifmultiple
sensorsarepresentontheDeviceSearchpage,movetoalesscrowded
locationtoperformtheinitialconnection.
Tapyoursensoronthelisttostarttheconnection.Thefirsttimeyou
connect,theappwillaskyoutoenterthelastthreedigitsofthedevice’s
serialnumber.Theserialnumbercanbefoundonthewarrantylabel
affixedtothecablenearthesensor.Ifthelabelisnotreadilyaccessible,
theserialnumberisavailableontheNMEA2000networkthrougha
connectedMFDorinstrumentdisplay.
Youwillonlyneedtoverifytheserialnumberonthefirstconnection.If
youconnectfromanotherdeviceordeleteandreinstalltheAirmarCAST
apponyourphone,you’llneedyourserialnumberagain,sobesureto
recordandsaveitifthelabelisn’treadilyaccessible.
6
GENERALUSENOTES
ManyvaluesintheAirmarCASTappcan
beadjustedbytheuser.Anyvaluethatis
underlinedcanbeadjusted.Tapthe
valuetoopenthekeypadandmakean
adjustmentordeletetheexistingvalue.
Whenenteringtable
values,tapthecell
valuetoopenthe
keypadandmakean
adjustment.Tapthe
headingoftherowor
columntoadjustthevaluein
thecellordeletetheroworcolumnaltogether.
Toenteranegativevalueusingthekeypad,enterthe
valueasapositivenumberfirst,thentapthe“+/‐“
buttoninthelowerleftcornertochangethesign.
DEVICEDATAPAGE—DST810SMARTTRIDUCER
Onceconnectedtoyourdevice,theCASTappwilldisplaythedata
availablefromthedevice.TheDST810willdisplayDepth(below
transducer),Speed(speedthroughwater),andTemperature(water
temperature).Asingletapanywhereonthescreenwillchangetheview
fromgraphictotext.
Bydefault,attitude(heelandtrim)outputisturnedoff.
Adatafieldthatdisplays“‐“iseitherdisabledorisnotreturningavalid
value.IfDepthdoesnotdisplayanumber,ensuretheurethanefaceof
thesensorisincontactwiththewater.Ifthewaterdepthisgreaterthan
themaximumrangeofthesensor,nodepthwillbereturnedand“‐“will
bedisplayed.
Thespeedometerviewwillshowaninitialrangeof0–15kn(thisrange
willbeadjustedbasedontheunitsselected).Asthespeedincreases,the
rangeofthespeedometerwillautomaticallyadjusttoensurethespeedis
alwayseasilyreadable.
Note:Ifapositivedepthoffsethasbeensavedtothesensor,theCAST
appwilldisplay“DepthBelowSurface.”Iftheoffsetsavedhasanegative
value,theCASTappwilldisplay“DepthBelowKeel.”SeetheOffsets
sectiononpage10formoreinformation.

7
INFORMATIONPAGE
SelecttheInformationtabtodisplayinformationontheconnected
device.
Theserialnumberisuniquetotheconnecteddevice.
ThepartnumberistheAirmarpartnumberforconnecteddevice.
Thecurrently‐installedfirmwareversionisdisplayednext.Takenoteofall
firmwareversionsforanytechnicalinquiries.
CUSTOMIZATION
ThefirsttimeyouconnecttoyourDST810,thedevicewillbedisplayed
simplyas“DST810”inthesearchmenu.Thisdisplaynamecanbe
adjustedusingthe“Customize”button.
Selecttheicondisplayedontheheel/trimgaugeandentera“Friendly
Name”fortheDST810.Thisname,alongwiththedevice’sserialnumber,
willbestoredonyourdevice.Thenexttimeyouconnecttothedevice,
themenuwillshowthedeviceusingtheFriendlyNameandthedevice’s
serialnumber.
Note:TheserialnumberandFriendlyNamearestoredlocallyinthe
AirmarCASTapp,notwithinthesensor.Ifyouconnecttothesensorusing
adifferentsmartphone,theFriendlyNamewillnotbedisplayeduntilyou
connectandnamethedevice.EnteringaFriendlyNamewillnotaffect
namesalreadysavedonothersmartphones.
UNITS
Onceconnectedtoadevice,youcanadjustthedisplayunitsbytapping
thegearicon atthetoprightcornerofthescreen.Unitsfor
speed,depth,temperature,anddistancecanbeselectedindividually.For
example,speedcanbedisplayedinmilesperhourwhiledistanceis
displayedinnauticalmiles,orviceversa.

8
NMEA2000®PAGE
TheNMEA2000pagedisplaysallthePGNstheconnecteddeviceis
capableofsupplyingtothenetwork.
Bydefault,eachitemwilldisplaythenameofthePGNandtheNMEA
2000PGNnumber.IfthePGNisdisabled,“Off”isdisplayed.IfthePGNis
enabled,theoutputratewillbedisplayed.
OutputratesareshownasanumberofPGNsperunittime.Forexample,
iftheWaterDepth(128267)PGNdisplays“1/sec,”thePGNisenabled
andwillbeoutputtothenetworkonetimeeachsecond.If“2/min”is
displayed,thePGNwillbeoutputtothenetworktwotimesperminute,
oronceevery30seconds.
Usethe“arrow”buttonontherightsideofeachitemtoexpanditand
enable/disableoradjusttheoutputrate.
TheswitchatleftwillenableordisablethePGNoutput.
ThedropdownmenuatrightwillallowyoutoadjustthePGNoutput
rate.
Note:ChangingthePGNoutputoroutputratewillnotchangethe
internaldatacalculationrate.

9
DisablingaPGNusingtheswitchwillpreventdatafrombeingsenttothe
network,butitwillnotpreventthesensorfromcalculatingavalue
internally.
Forexample,disablingtheDepth(128267)PGNwillpreventdepth
informationfrombeingprovidedtothenetwork,butitwillnotstopthe
sensorfrompingingfordepth.

10
OFFSETSPAGE
OffsetscanbeprogrammedforDepth,Temperature,andTrim,andHeel.
Anoffsetisanadditivevalue.Settinganoffsetwilladdto(orsubtract
fromiftheoffsetisnegative)thevaluemeasuredbythesensor.The
unadjustedvaluemeasuredbythesensorislistedas“Raw.”Tapthe
underlined“Offset”valuetoadjusttheoffset.Enteranegativevalueto
subtractfromtherawvalueorapositivenumbertoadd.
Forexample,ifthekeelextends1footdeeperthanthefaceofthe
transducer,enteravalueof‐1asadepthoffsettodisplay“DepthBelow
Keel.”1willbesubtractedfromeverydepthmeasurementtakenbythe
sensorbeforeitissenttothenetwork.Everydeviceonthenetworkwill
seetheadjusteddepthbelowkeel.
Temperatureoffsetsworksimilarlytodepthoffsets.
Heelandtrimcanbecalibratedusinganoffsetaswell.Theoffsetin
degreesisaddedtotherawvaluefromthesensor.
Ifnooffsetshavebeenprogrammed(0degreesforbothheelandtrim),
theappwillpromptyoutocalibratethesensor.Thiscanbedoneinone
oftwoways.”
Toautomaticallycalibrateheelandtrim,makesuretheboatisrelatively
stationary.Pressandholdthecirclemarked“HoldtoCalibrate.”Theapp
willbegintocalculateanaveragepitchandrollreadingover10seconds
andanorangebarwilldisplaytheprogress.Oncethebarflashesgreen,
theaveragereadingforbothheelandtrimwillautomaticallypopulate
theoffsetfieldsandthesensorshouldreadapproximately0degrees
under“Value”forbothheelandtrim.Remember,thecalculationusesan
average,soanymovementoverthemeasurementperiodwillimpactthe
finalnumber.
Alternatively,thevaluescanbemanuallyprogrammed.Forexample,if
therawheelvalueis17.8degrees,enteringanoffsetof‐17.8willresult
inareportedvalueof0degrees.

11
SPEEDCALIBRATION
Unlikeoffsets,whichareadditive,basicspeedcompensationvaluesare
enteredaspercentagesandaremultiplicative.A10%speed
compensationwillresultina10%increaseinthereportedspeedacross
allvalues.
Forexample,a10%speedcompensationwillresultinanoutputof11kn
(+1kn)whenthepaddlewheelmeasuresarawvalueof10knandan
outputof22kn(+2kn)whentherawmeasuredvalueis20kn.
Thewaterflowprofileunderthehullofyourboathasalargeaffecton
thereadingofthespeedsensor.Manyvariables,includingtheshapeof
thehull,theroughnessofthesurface,thepositionofstrakes,etc.will
changetheattachedflowprofile.Seethetransducer’sinstallationguide
forinformationonwheretoinstallthesensorinthehulltoensure
accuratespeedanddepthperformance.Evenwhenthesensoris
correctlyinstalled,it’simportanttocalibrateyourpaddlewheelatits
installationlocationandundernormalusetomakesureitdeliversthe
bestpossibleperformance.
Calibratingspeedbytravelingaknowndistanceisacommonmethodof
calibration,butthestartandendpointsaretypicallyfixedtotheground
andasinglerundoesnottakeintoaccountthemovementofthewater
current.
CalibratingdirectlytorawGPSspeedovergroundcanalsoresultinan
inaccuratecalibration.Iftheboatistravelingina3kncurrentinthe
directionofmovement,theGPSSOGwillbe3knfasterthantheactual
speedthroughwater.
TheAirmarCASTappallowsyoutoquicklycalibratespeedandcorrectfor
current.Youcanalsocorrectthespeedcalibrationforchangesintheflow
beneaththehullthatoccurwhentheboatisheeledovertoonesideor
theother.
ThereareseveralmethodsofspeedcalibrationusingtheCASTapp.

12
BASICSPEEDCORRECTION
Thesimplestwaytocalibratespeedisasinglepointpercentageoffset.
Thistypeofcalibrationappliesafixedpercentagecorrectiontoevery
readingfromthepaddlewheel.
NavigatetotheSpeedCalibrationtab.Bydefault,thespeedcalibrationis
setto“OFF.”
Enablethe“BASIC”speedcalibration.
Ifthedesiredpercentageadjustmentisknown,youcansimplyenterit
intotheCompensationfield.
Ifyouwouldliketheapptocalculatethecorrectpercentageadjustment
foryou,tapthewizardicon.
CASTappcancalculatethepercentageusingoneoftwomethods.
SOG:SpeedthroughwateriscalculatedusingaGPSreference
speedoverground.
Distance:Speedthroughwateriscalculatedusingtraveltime
overaknowndistancesuchasameasuredmile.
SOGMETHOD
TheSOGmethodallowstheapptocalculateyouraveragespeedover
groundusingtheinternalGPSinyoursmartdevice.Youcanalso
manuallyenteranaveragevaluefromanexternalsource.
Bringtheboatuptocalibrationspeed.Thisisthespeedwhereyouwant
thegreatestaccuracyinyourspeedreadingandwillbedifferentforeach
boat.
Oncetravelingatarelativelyconstantspeedanddirection,tapthe
“Primary”button.Theappwillcountdownasitcalculatesanaverage
indicatedspeedfromthepaddlewheelandanaverageGPSSOG.

13
Oncecomplete,theaverageforeachvaluewillbeshownandthe
“Primary”buttonwillchangeto“Reverse.”
Turntheboat180degreesandbringitbacktoapproximatelythesame
speedusedintheprimarydirection.Youdon’tneedtoholdexactlythe
samespeedfromtheprimaryrun,butthecloser,thebetter.Maintaina
consistentspeedanddirection.
Tap“Reverse”andwaitfortheapptocountdownwhiletheaverage
speedsarecalculated.Thesecondrunintheoppositedirectionallows
theapptocalculatethespeedofthecurrentinthewaterandremoveit
fromthecalibration.
Oncecomplete,theappwilldisplaythecalculatedpercentage
adjustment.Tap“Apply”tosavethevalue.
Thespeedcorrectionvaluehasnowbeencalculatedandsavedto
memoryintheDST810.Itwillbeappliedtoallspeedvaluessenttothe
networkandtransmittedwirelesslytotheapp.Alldevicesconnectedto
theNMEA2000networkwilldisplaytheadjustedvalue.
ThevaluecanbemanuallyadjustedbytappingthevalueontheSpeed
Calibrationscreen.
DISTANCEMETHOD
ThedistancemethodofspeedcalibrationwillnotmakeuseofGPS.
Instead,you’lltravelaknowndistanceatarelativelyconstantspeed.The
appwillcalculatetheaveragespeedtraveledusingthetimerequiredto
covertheknowndistance.Itwillalsocalculatetheaverageindicated
speedfromthepaddlewheelandcomparethetwo.
Note:Calibrationusingaknowndistancerequiresbothanaccurate
measurementbetweentworeferencepointsandanaccuratetimeto
travelbetweenthem.Theshorterthedistancebetweenpoints,themore
potentialthereisforerrorinthemeasurement.Aminimumdistanceof
onestatutemileisrecommendedforadistance‐basedspeedcalibration.
Selectthe“Distance”button.
Entertheknowndistancebetweentwopointsintheunitsindicated.
Bringtheboatuptocalibrationspeed.Thisisthespeedwhereyouwant
thegreatestaccuracyinyourspeedreadingandwillbedifferentforeach
boat.

14
Whenyoupassthestartpoint,tap“Start.”Theappwillbegincountingin
seconds.
Whenyoupasstheendpoint,tap“Stop.”Thenumberofrunswill
increasebyoneandthecalculatedspeedswillbeshown.
Thenumberofrunsalreadycompletedwillbeshownas“Completed
Runs.”“TotalTime”isacountofthetotalnumberofsecondsforallruns.
“RunSpeed”showstheaveragerecordedpaddlewheelspeedonthelast
run,while“Speed”showstheoverallaverage.“RunCorrection”isthe
correctionfactorcalculatedonthepreviousrun,and“Correction”isthe
overallaveragecorrectionfactorcalculated.
Followthesameprocessforadditionalruns.Ifyouwouldliketothrowa
runout,tap“DiscardRun”oncecompleteandtryagain.
Note:Ifyou’reperformingthecalibrationinalocationwhereasignificant
currentmaybepresent,makesuretoperformanevennumberofruns
withhalfinonedirectionandhalfreturningintheoppositedirection,as
closeto180degreesaspossible.Thiswillensurethecalculatedaverage
accuratelyaccountsforthecurrent.
Oncecomplete,tap“Apply”tosavethevalue.
Thespeedcorrectionvaluehasnowbeencalculatedandsavedto
memoryintheDST810.Itwillbeappliedtoallspeedvaluessenttothe
networkandtransmittedwirelesslytotheapp.Alldevicesconnectedto
theNMEA2000networkwilldisplaytheadjustedvalue.
ThevaluecanbemanuallyadjustedbytappingthevalueontheSpeed
Calibrationscreen.
15
HEEL‐CORRECTEDSPEEDCALIBRATION
Note:MakesuretheattitudePGNisenabledontheNMEA2000page.
Onceenabled,makesurethesensorhasbeencalibratedwiththeboat
stationary.RefertotheOffsetsPagesectionformoreinformationabout
calibrationoftheattitudesensor.Heel‐correctedSpeedCalibrationand
theAdvancedCalibrationTablecannotbeusedwithoutattitudeenabled.
Changesinheelangleoftheboatwhileunderwaycanaffectthespeed
calculatedbythepaddlewheel.TheDST810canstorecalibrationsatup
totwodifferentanglesoneachsideinadditiontothestandard
calibration.Inordertoapplyaspeedcalibrationatmorethanoneangle,
theadvancedtablemustbeused.
Astheheelangleoftheboatchanges,thesensorwillshiftfromone
curvetothenext,interpolatingbetweenthem.
Forexample,ifa15%compensationisappliedat10degreesofheeland
a5%compensationisappliedat0degrees,thesensorwillapplya10%
compensationat5degreesofheel.
Heel‐correctedSpeedCalibrationsareappliedusingasimilarprocessas
theStandardCalibration.However,thenatureoftheprocessprevents
makingrunsinoppositedirections.Forthisreason,it’simportantto
performthecalibrationinslackwater.
BeginthecalibrationbyselectingthewizardiconontheHeel‐corrected
SpeedCalibrationwindow.LiketheStandardCalibration,theHeel‐
correctedSpeedCalibrationcanbeperformedusingtwomethods.
SOG:SpeedthroughwateriscalculatedusingaGPSreference
speedoverground.
Distance:Speedthroughwateriscalculatedusingtraveltime
overaknowndistancesuchasameasuredmile.
SOGMETHOD
TheSOGmethodallowstheAirmarCASTapptocalculateyouraverage
speedovergroundusingtheinternalGPSinyoursmartdeviceor
manuallyenteranaveragevaluefromanexternalsource.
Bringtheboatuptocalibrationspeed.Thisisthespeedwhereyouwant
thegreatestaccuracyinyourspeedreadingandwillbedifferentforeach
boat.

16
Choosetheangleatwhichyouwouldliketoperformthecalibration.
Makesureyoucanmaintaintheangleofheelenteredinbothdirections;
thesameangleisusedforbothportandstarboard.Theappwill
automaticallyrecognizeaportorstarboardtack;there’snoneedto
specifytherun,onlytomaintainasclosetotheselectedangleas
possible.
Oncetravelingatarelativelyconstantspeed,direction,andheelangle,
tapthe“Primary”button.Theappwillcountdownasitcalculatesan
averageindicatedspeedfromthepaddlewheelandanaverageGPSSOG.
Theappwillnotpromptforasecondrunasthisisoftennotpossible.It’s
importantthiscalibrationberuninslackwater.
Oncecomplete,theappwilldisplaythecalculatedpercentage
adjustmentforthesidetowhichtheboatwasheeled.Performthesame
processagaintoaddacalibrationfortheoppositeside,andkeepinmind
thetwowillfrequentlybedifferent.Tap“Apply”tosavethevalue.
Thespeedcorrectionvaluehasnowbeencalculatedandsavedto
memoryintheDST810.Itwillbeappliedtoallspeedvaluessenttothe
networkandtransmittedwirelesslytotheapp.Alldevicesconnectedto
theNMEA2000networkwilldisplaytheadjustedvalue.
ThevaluecanbemanuallyadjustedbytappingthevalueontheSpeed
Calibrationscreen.
DISTANCEMETHOD
ThedistancemethodofspeedcalibrationwillnotmakeuseofGPS.
Instead,you’lltravelaknowndistanceatarelativelyconstantspeed.The
appwillcalculatetheaveragespeedtraveledusingthetimetocoverthe
knowndistance.Itwillalsocalculatetheaverageindicatedspeedfrom
thepaddlewheelandcomparethetwo.
Note:Calibrationusingaknowndistancerequiresbothanaccurate
measurementbetweentworeferencepointsandanaccuratetimeto
travelbetweenthem.Theshorterthedistancebetweenpoints,themore
potentialthereisforerrorinthemeasurement.Aminimumdistanceof
onestatutemileisrecommendedforadistance‐basedspeedcalibration.
Selectthe“Distance”button.
Entertheangleatwhichyouwouldliketocalibrateandtheknown
distancebetweentwopointsintheunitsindicated.

17
Bringtheboatuptocalibrationspeedandtheselectedheelangle.Thisis
thespeedwhereyouwantthegreatestaccuracyinyourspeedreading
andwillbedifferentforeachboat.
Whenyoupassthestartpoint,tap“Start.”Theappwillbegincountingin
seconds.
Thenumberofrunsalreadycompletedwillbeshownas“Completed
Runs.”“TotalTime”isacountofthetotalnumberofsecondsforallruns.
“RunSpeed”showstheaveragerecordedpaddlewheelspeedonthelast
run,while“Speed”showstheoverallaverage.“RunCorrection”isthe
correctionfactorcalculatedonthepreviousrun,and“Correction”isthe
overallaveragecorrectionfactorcalculated.
Followthesameprocessforadditionalruns.Ifyouwouldliketothrowa
runout,tap“DiscardRun”oncecompleteandtryagain.
Note:Ifyou’reperformingthecalibrationinalocationwhereasignificant
currentmaybepresent,makesuretoperformanevennumberofruns
withhalfinonedirectionandhalfreturningintheoppositedirection,as
closeto180degreesaspossible.Thiswillensurethecalculatedaverage
accuratelyaccountsforthecurrent.
Oncecomplete,tap“Apply”tosavethevalue.Theappautomatically
detectsthedirectionofheelandpopulatesthecorrectfield.
Thespeedcorrectionvaluehasnowbeencalculatedandsavedto
memoryintheDST810.Itwillbeappliedtoallspeedvaluessenttothe
networkandtransmittedwirelesslytotheapp.Alldevicesconnectedto
theNMEA2000networkwilldisplaytheadjustedvalue.
ThevaluecanbemanuallyadjustedbytappingthevalueontheSpeed
Calibrationscreen.

18
ADVANCEDSPEEDCALIBRATIONTABLE
Note:Theadvancedspeedcalibrationtablewilloverrideanyother
programmedspeedcorrections.Itwillnotbeaddedontopoftheexisting
speedcalibration.Beforeswitchingtotheadvancedcalibrationtable,
makesuretocarefullyquantifytheperformanceofthesensorwithout
anycorrectionsinplace.
TheAdvancedSpeedCalibrationTableallowsfineadjustmentofspeed
correctionovermultiplespeedsandangles.
Uptotwoanglespersidecanbeselected.
Upto10non‐zerospeedscanbeaddedtothetable.
Note:Whenusingtheadvancedcalibrationtable,makesurethehighest
speedinthetableisthefastestspeedthevesselwilltypicallyachieve.If
thespeedexceedsthelargestvalueinthetable,thesensorwillapplya
linearcorrectionofthesameslope.Thiscanloseaccuracyquicklyifthe
lastspeedisverylow.It’simportantthetableincludetheentirerangeof
achievablespeedsregardlessofthenumberofindividualpoints.
Tousetheadvancedspeedcalibrationtable,first
switchspeedcalibrationto“Off.”
Eithermanuallyorusing3
rd
partysoftware,collect
thedifferencebetweenindicatedspeedandactual
speedthroughwaterateachcalibrationpoint.
Thetableisorganizedwithspeedsshownas
columnsandheelanglesshownasrows.Eachcellis
thespeedcorrection(inunitsofspeed,suchas
knots,mph,etc.)appliedtothatspecificheelangle
andspeedcombination.
EnabletheAdvancedSpeedCalibrationTableonthe
SpeedCalibrationTab.Expandthetabletothedesirednumberofrows
andcolumns.Inputthedifferencesmeasuredpreviously.Forexample,if
at0degreesofheeland8knindicatedspeedtheactualspeedthrough
waterwasmeasuredat8.5kn,enter0.5inthatcell.Iftheactualspeed
throughwaterwasmeasuredat7.5kn,enter‐0.5inthatcell.
Makesuretofilloutthetablecompletely.Removeanyunusedrowsand
columnsbyselectingtheheadingandtappingtheX.Theadvancedtable
doesnotadjustthebasicspeedcalibrations;itisastandalonemethodof
speedcalibrationthatoverridestheothers.InaccurateindicatedSTWwill
resultifthetableisnotcompletelyfilledin.

19
Makesuretosavearecordofthetableasentered.Becausethe
advancedspeedsettingsoverrideallothers,thetablewillbedeletedif
youreturntotheBasicCalibrationsettings.Thetablewillneedtobe
reenteredifyoureturntotheAdvancedCalibrationTable.
Thespeedcalibrationtabswillnotappearwhenthedeviceisin
landscapemode—turnbacktoportraitaspecttodisplaythetabsandexit
theadvancedcalibration.
Note:Makesuretokeeparecordofthedataintheadvancedtable.As
longasthetableisactive,thedataaresavedtomemoryintheDST810.If
theAdvancedSpeedtableisdisabledbyswitchingbacktoBasicorOff,
thedatainthetablewillbepermanentlydeleted.

Page is loading ...
/