Arrow BR67L Owner's manual

Owner's Manual & Assembly Instructions

717840517

Missing Parts, Questions on Assembly?

Call: 1-800-851-1085 or

[email protected]

Do not return to dealer, they are not

equipped to handle your requests.

CAUTION: SOME PARTS HAVE SHARP EDGES. CARE

MUST BE TAKEN WHEN HANDLING THE VARIOUS PIECES

TO AVOID A MISHAP. FOR SAFETY SAKE, PLEASE READ

SAFETY INFORMATION PROVIDED IN THIS MANUAL

BEFORE BEGINNING CONSTRUCTION. WEAR GLOVES

WHEN HANDLING METAL PARTS.

* Size rounded o to the nearest foot

BUILDING DIMENSIONS

Exterior Dimensions Interior Dimensions Door

*Approx. Base (Roof Edge to Roof Edge) (Wall to Wall) Opening

Size Size Width Depth Height Width Depth Height Width Height

6' x 7' 74" x 81" 76 1/4" 83 1/2" 69 7/8" 71 1/4" 78 1/4" 68 5/8" 32" 60"

1,8 m x 2,0 m 188,0 cm x 205,7 cm 193,7 cm 212,1 cm 177,5 cm 181,0 cm 198,8 cm 174,3 cm 81,3 cm 152,4 cm

Storage Area: 39 Sq. Ft. 212 Cu. Ft.

3,6 m2 6,0 m3

BD01

Model No. DW67BR67L

GB: Assembly manual in additional languages available online.

Scan QR code below to access.

FR: Manuel de montage disponible en ligne dans d’autres langues.

Pour y accéder, scannez le code QR ci-dessous.

SP: Manual de montaje en idiomas adicionales disponible online.

Escanee el código QR a continuación para acceder.

DE: Montageanleitung in zusätzlichen Sprachen online verfügbar.

Scannen Sie den QR-Code unten, um darauf zuzugreifen.

I T: Manuale dell’assemblea in altre lingue disponibile online.

Per accedere effettua la scansione del codice QR in basso.

P T: Manual de montagem disponível em outros idiomas online.

Digitalize o código QR abaixo para obter acesso.

D T: Samlingshåndbog i yderligere sprog til rådighed online.

Scan QR kode nedenunder for at få adgang.

SK:Nainternetejekdispozíciinávodnazostavenievďalšíchjazykoch.

Dostanete sa k nemu naskenovaním kódu QR.

CZ:Návodkmontáživdalšíchjazycíchjekdispozicivonlineverzi.

 PřístupzískáteponaskenováníQRkóduníže.

HU: Azösszeszerelésiútmutatótovábbinyelvekeniselérhetőonline.

A hozzáféréshez olvassa be az alábbi QR-kódot.

GR: Υπάρχειδιαθέσιμοστοδιαδίκτυοτοεγχειρίδιοσυναρμολόγησης

 σεπερισσότερεςγλώσσες.Σαρώστετονπαρακάτωκώδικα 

 QRγιανααποκτήσετεπρόσβαση.

P/N 6PP722621216

Owner's Manual

Before beginning construction, check local building codes regarding footings, location

and other requirements. Study and understand this owner's manual.

Important information and helpful tips will make your construction easier and more

enjoyable.

Assembly Instructions: Instructions are supplied in this manual and contain all

appropriate information for your building model. Review all instructions before you begin,

and during assembly, follow the step sequence carefully for successful results.

Flooring and Anchoring: Your storage building must be anchored to prevent wind

damage. A base is necessary to construct a square and level building. Anchoring and

base materials are not included with your building. We recommend the combined use

of an Arrow Floor Frame Kit and an Arrow Anchoring Kit as an effective method of

securing your building to the ground (Available at your local dealer, Arrow's website

arrowsheds.com or call Arrow's Customer Service department 1-800-851-1085) or you

may construct a base and anchoring system of your choice. Your assembly instructions

provide information on a few methods commonly used to secure and level a storage

building.

Parts and Parts List: Check to be sure that you have all the necessary parts for

your building.

•All part numbers can be found on the parts. All of these numbers (before the -) must agree with the

numbers on the Parts List page.

•If you  nd that a part is missing, include the model number of your building and contact:

Arrow Shed, LLC Customer Service Department

1101 North 4th Street Breese, Illinois 62230

•Separate contents of the carton by the part number while reviewing parts list. The  rst few steps

show how to join related parts to make larger sub assemblies which will be used later.

•Familiarize yourself with the hardware and fasteners for easier use during construction. These are

packaged within the carton. Note that extra fasteners have been supplied for your convenience.

BEFORE YOU BEGIN....

A03

1-800-851-1085 or assist@arrowsheds.com

Selecting and Preparing Your Site: Before assembly, you will want to decide on a

location for your building. The best location is a level area with good drainage.

•Allow enough working space for ease of moving parts into position during assembly. Be sure there

will be enough space at entrance for doors to open fully and enough space around the building to

be able to fasten the panel screws from the outside.

•Before you begin the  rst steps in assembling your parts, a base should be constructed and

an anchoring system should be ready to use.

Watch the Weather: Be sure the day you select to install your building is dry and calm.

Do not attempt to assemble your building on a windy day. Be careful on wet or muddy ground.

Teamwork: Whenever possible, two or more people should work together to assemble

your building. One person can position parts or panels while the other is able to handle the

fasteners and the tools.

Tools and Materials: These are some basic tools and materials you will need for the

construction of your building. Decide which method of anchoring and the type of base you

wish to use in order to form a complete list of the materials you will need.

Base Preparation

• Hammer and Nails

• Spade or Shovel

• Hand Saw / Power Saw

• Lumber and/or Concrete

Optional Time-Savers

• Wrench / Nut Driver

• Electric / Cordless Drill

• Square

• String (for squaring frame)

Required

• Work Gloves

• Step Ladder

• Utility Knife / Scissors

• Pliers

• Carpenter's Level

• Tape Measure

Required

• Eye Goggles

• No. 2 Phillips Screwdriver

(With Hardened Magnetic Tip)

Note: A power screwdriver or vari-

able speed drill with Phillips-tip

attachment can speed assembly by

as much as 40%.

PLAN AHEAD....

A04

Safety precautions are important to follow throughout the construction of your building.

•Care must be taken when handling various

pieces of your building since some contain

sharp edges. Please wear work gloves, eye

protection and long sleeves when assembling

or performing any maintenance on your

building.

•Practice caution with the tools being used in

the assembly of this building. Be familiar with

the operation of all power tools.

•Never concentrate your total weight on the

roof of the building. When using a step ladder

make sure that it is fully open and on even

ground before climbing on it.

•Keep children and pets away from worksite

to avoid distractions and any accidents which

may occur.

•Do not attempt to assemble the building if

parts are missing because any building left

partially assembled may be seriously damaged

by light winds. Call 1-800-851-1085 or assist@

arrowsheds.com

•Do not attempt to assemble the building on a

windy day, because the large panels acting as a

"sail", can be whipped about by the wind making

construction di cult and unsafe.

SAFETY FIRST....

A05

safety edge

sharp edge

Finish: For long lasting  nish, periodically clean and wax the exterior surface. Touch-up

scratches as soon as you notice them on your unit. Immediately clean the area with a wire

brush; wash it and apply touch-up paint per manufacturer's recommendation.

Roof: Keep roof clear of leaves and snow with long handled, soft-bristled broom. Heavy

amounts of snow on roof can damage building making it unsafe to enter. In snow country,

Roof Strengthening Kits are available for most Arrow Buildings for added protection against

heavy snow accumulation. Contact Arrow as outlined on the Ordering Accessories page

to place an order.

Doors: Always keep the door tracks clear of dirt and other debris that prevent them from

sliding easily. Lubricate door track annually with furniture polish or silicone spray. Keep

doors closed and locked to prevent wind damage.

Fasteners: Use all washers supplied to protect against weather in ltration and to protect

the metal from being scratched by screws. Regularly check your building for loose screws,

bolts, nuts, etc. and retighten them as necessary.

Moisture: A plastic sheet (vapor barrier) placed under the entire  oor area with good

ventilation will reduce condensation.

Other Tips....

• Wash o inked part numbers on coated panels with soap and water.

• Silicone caulking may be used for watertight seals throughout the building.

Keep this Owner's Manual and Assembly Instructions for future reference.

CARE & MAINTENANCE....

A06

Do not store swimming pool chemicals in your building. Combustibles and

corrosives must be stored in air tight approved containers.

ACCESSORIES....

A07

* Some drilling required to  t buildings without mid-wall bracing.

Model No. SS404

• Makes 8" to 12" (20,3-30,5 cm)

wide shelves in any length.

• Brackets, braces,

hardware included.

Lumber is not included.

Model No. SS900-B

• Grey color

• 3 shelves

• Holds up to 85 lbs. (38 kg)

(even weight distribution)

Heavy-duty, galvanized steel shelf units help organize storage

space. They easily mount on the wall or sit on the  oor. Fits all

Arrow buildings.*

SHELF UNITS

ATTIC KIT / WORKBENCH KIT

Model No. AT101

Heavy-duty galvanized steel bars that

 t all 10' (3,0 m) wide Arrow buildings.

They install quickly and easily to

help organize space and create

more useable space as an attic or

workbench. Will hold up to 250 lbs.

(113 kg) evenly distributed.

Some drilling required to  t buildings without mid-wall bracing.

Model No. AK100

New concrete anchor system permits

anchoring any size Arrow building

directly to a concrete slab. Each kit

contains heavy-duty, hot-dipped

galvanized steel corner gussets and

perimeter clips which  t over the  oor

frame and lag bolt into a concrete slab.

Full assembly instructions and a 1/4"

masonary drill bit are included.

TOOL HANGING RACK

Model No. TH100

The perfect tool organizer. Twin

25 1/2" (64,8 cm) steel channels

plus  ve heavy-duty snap-in

hangers and a small tool holder for

screwdrivers, pliers, etc. Holders

slide along channel for fully

adjustable spacing. Great for

garage, basement, or the back

of any door. Fits all Arrow

storage buildings.

ROOF STRENGTHENING

(heavy snow load) KITS

Extra roof beams and gable braces

designed for added protection against

heavy snow accumulation. Increases

the strength of your roof.

ANCHOR KITS

Model No. AK4

Anchor Kit contains heavy-duty steel

augers, 60' (18 m) of steel cable and

4 cable clamps. No digging or concrete

pouring, just insert cable under roof,

over roof beams, into augers and twist

augers into the ground. For buildings

larger than 10'x9' (3,0 m x 2,6 m), use 2 kits.

FLOOR FRAME KITS

MODELS FB47410, FB5465, FB106-A

FB109-A and FB1014-A

A simple new  oor frame system made of heavy-duty, hot-dipped

galvanized steel. Use as base for plywood, sand or stone.

Model No. AK600

Earth Anchor Kit anchors any size

Arrow building to the ground.

Each kit contains heavy duty,

hot-dipped galvanized steel

corner gussets and 4 earth anchors.

BEFORE AFTER

We recommend that you purchase accessory items from your local storage building dealer whenever possible;

however, because the full line of accessories is not always available from all dealers, Arrow is o ering them

to you on a direct basis.

There are two ways to order Arrow Storage Building Accessories:

SPECIAL NOTE:

If your accessory is shipped via truck line a day time phone number is required to arrange delivery. If no

one is available to sign for the delivery, you may be subject to a re-delivery charge assessed by the carrier.

ORDERING ACCESSORIES....

A08 02/13

Option 1

Accessories can be purchased

through

arrowsheds.com

Option 2

Order accessories by telephone

using your MasterCard or Visa credit card.

Call toll free 1-800-851-1085

(Customer Service).

Allow 2 weeks for delivery.

The Base For Your Building

FRONT

(DOOR)

FRONT

(DOOR)

Base

ZX09

Note: Finished Slab dimensions, with lumber removed.

OPTION 1: Wood Platform

If you decide to build your own base, be sure to select the appropriate materials.

These are the recommended materials for your base:

 2 x 4's (38 mm x 89 mm) Pressure Treated Lumber

 5/8" (15,5 mm) 4 x 8 (1220 mm x 2440 mm) Plywood-exterior grade NOTE: Pressure Treated Lumber must not be used where it

will make contact with your storage building. The properties of Pressure Treated Lumber will cause accelerated corrosion.

If Pressure Treated Lumber comes in contact with your storage building your warranty will be voided.

 10 & 4 penny Galvanized Nails  Concrete Blocks (optional)

The platform should be level and  at (free of bumps, ridges etc.)

to provide good support for the building. The necessary materials

may be obtained from your local lumber yard.

To construct the base follow instructions and diagram.

Construct frame (using 10 penny galvanized nails)

Measure 16"/24" (40,6 cm/61,0 cm) sections to construct

inside frame (see diagram)

Secure plywood to frame (using 4 penny galvanized nails)

Allow 6 - 7 hours for construction.

OPTION 2: Concrete Slab

The slab should be at least 4" (10,2 cm) thick. It must be level and  at to provide good support for the frame.

The following are the recommended materials for your base.

 1 x 4's (19 mm x 89 mm) (will be removed once the concrete cures)

 Concrete  Sheet of 6 mil plastic

 We recommend for a proper strength concrete to use a mix of:

1 part cement  3 parts pea sized gravel  2 1/2 parts clean sand

Prepare the Site/Construct a Base

1. Dig a square, 6" (15,2 cm) deep into the ground (remove grass).

2. Fill up to 4" (10,2 cm) in the square with gravel and tamp  rm.

3. Cover gravel with a sheet of 6 mil plastic.

4. Construct a wood frame using four planks of 1x4 (19 mm x 89 mm)

lumber.

5. Pour in concrete to  ll in the hole and the frame giving a

total of 4" (10,2 cm) thick concrete. Be sure surface is level.

Allow 3 - 5 hours for construction and a week for concrete curing time.

Note: Platform/Slab will extend 9/16" (1,4 cm) beyond  oor

frame on all four sides. Seal this 9/16" (1,4 cm) of wood with a

roo ng cement (not included), or bevel this 9/16" (1,4 cm) of

concrete when pouring, for good water drainage.

16"/24"

40,6 cm/61,0 cm

74"

188,0 cm

81"

205,7 cm

74"

188,0 cm

81"

205,7 cm

9

It is important that the entire  oor frame be anchored after the building is erected.

Below are recommended ways of anchoring.

Anchoring Down The Building

Anchoring

A10

Arrow Anchoring Kit: (Model No. AK100 or 68383)

Recommended for use with the concrete base.

Contains: Corner gussets, perimeter clips, hardware,

1/4" masonary drill bit and installation instruction.

Anchoring into Concrete:

1. For poured concrete slab or footing or patio blocks:

Use 1/4" x 2" (6 mm x 51 mm) Lag Screws.

2. For Anchor Post of Concrete poured after building is

erected: Use 1/4" x 6" (6 mm x 152 mm) Lag Screws.

Arrow Anchoring Kit: (Model No. AK4 or 60298)

Recommended for use with any suggested base.

Contains: 4 Anchors with Cable, Clamps and

installation instruction.

Anchoring into Wood/Post:

Use 1/4" (6 mm) Wood Screws. There are 1/4" (6 mm)

dia. holes provided in the frames for proper anchoring.

OVER THE BEAMS

AND INTO THE GROUND

1. 2.

10

Remove from bag of screws

and save for the last step

67293

Weather Stripping (1)

66775

Plug (2)

(Packed with Screws)

66382

Lower Door Guide (4)

66183

Roof Trim Cap

(2 right & 2 left)

66045

Handle (2)

66646

Washer (237)

(6 sheets of 40)

65109

#8-32 Acorn Nut (6)

(Packed with Screws)

67468

Peak Cap (2)

(Arrow Logo)

65004

#8Ax5/16" (8 mm)

Screw (214)

65923

#8-32x3/8" (10 mm)

Bolt (93)

65900A

#10Bx1/2" (13 mm)

Black Screw (8)

(Packed with Screws)

65103

#8-32 Hex Nut (93)

Hardware

ZX11

66769

Door Slide (4)

11

Assembly Part Part Quantity Check

Key No. Number Description in Carton List

1 10539 Roof Beam 4

2 10540 Side Wall Angle (Right) 2

3 5996 Right Gable 2

4 5997 Left Gable 2

5 10454 Side Roof Trim 2

6 10538 Right Roof Panel 2

7 80003 Left Roof Panel 2

8 10499 Horizontal Door Brace 4

9 6657 Door Handle Brace 2

10 6658 Gable Brace 2

11 10453 Ridge Cap 1

12 6515 Wall Panel (Rear) 2

13 10476 Right and Left Doors 2

14 7332 Wall Panel (Side) 4

15 9369 Door Jamb 2

16 9389 Front Corner Panel 2

17 10681 Rear Corner Panel 2

18 9396 Door Track 1

19 9397 Rear Wall Angle 1

20 9925 Rear Wall Channel 1

21 9399 Rear Floor Frame 1

22 69836 Edge Trim (Purple) 4

23 10541 Side Wall Channel 4

24 10542 Side Floor Frame (Right) 2

25 9403 Front Floor Frame 1

26 6444 Roof Panel 2

27 8814 Ridge Cap 1

28 8811 Side Roof Trim 2

29 80005 Side Wall Angle (Left) 2

30 80007 Side Floor Frame (Left) 2

Parts List

ABO12

12

13

Assembly by Key No.

ZX13

25

30

24

23

8

9

23

14

17

12

12 19

20

13

15

24

21

17

29

2

8

818

16

11

28

5

28

6

26

7

6

26

7

3

4

22

10

11

27

10

The side  oor frames are made up

of two pieces. The holes in these

pieces will align when the pieces

are positioned with correct amount

of overlap. The illustrations below

show the proper overall length for the

sides. Proceed as follows:

1 Overlap the side  oor frames as

shown. The holes in these pieces will

align when the pieces are positioned

with correct amount of overlap. See

the illustrations below for the proper

overall length of the side  oor frames.

Join the frames by inserting  ve bolts

into each frame set as shown.

2 Double check the length of each

and set these pieces aside for later

use.

Step 1

ZX14

 Parts Needed For 

Floor Frame Assemblies

 80007 Left Side Floor Frame (2)

 10542 Right Side Floor Frame (2)

10542

80007

10542 Right

80007 Left Side Floor Frame 79 3/8"

201,6 cm

STEP

1

STEP

2

79 3/8" 201,6 cm

Side

(10)

79 3/8" 201,6 cm

14

Step 2

ZX15

 Parts Needed For 

Frame Assemblies

The main frame pieces reinforce

the walls. These pieces will later be

installed in the center and at the top

edge of the side walls. Proceed as

follows:

1 Make two side wall channels by

overlapping the side wall channel

pieces as shown. Fasten each set to-

gether with one bolt in the center hole

of each set (three holes will align).

2 Make two side wall angles by

overlapping the side wall angle pieces

as shown. Fasten each set together

with one bolt in the center hole.

3 Double check the length of each

and set these pieces aside for later

use.

 80005 Left Side Wall Angle (2)

 10541 Side Wall Channel (4)

 10540 Right Side Wall Angle (2)

STEP

1

2

10541

Side Wall Channels

78 1/8" 198,4 cm

80005

Left

10540

Right

Side Wall Angles

78 1/8" 198,4 cm

STEP

3

STEP

(4)

Side Wall Channels

78 1/8" 198,4 cm

Side Wall Angles

78 1/8" 198,4 cm

15

10541

The roof beams join the two gables

and support the roof panels. The

roof beam is made up of four pieces

overlapped back to back at the center.

Hint: These pieces are force-fitted,

so you may have to press hard to join

them together.

1 Place the end of one roof beam

inside a second roof beam so that the

six holes in each piece align. Make

two sets of roof beams by repeating

this procedure. Do not insert bolts

yet.

2 Take the two pressed-together

roof beams and join them as shown

to form the main roof beam assem-

bly. Hold the assembly together and

fasten with 14 bolts.

3 Double check the length of each

and set these pieces aside for later

use.

Step 3

ZX16

 Parts Needed For 

Roof Beam Assembly

 10539 Roof Beam (4)

10539

STEP

1

Roof Beam 80 1/8" 203,5 cm

Build Doubled Main Roof

Beam Assembly for Peak in Roof

END

VIEW

10539

STEP

2

10539

ASSEMBLED

80 1/8"

203,5 cm

(14)

16

Step 4  Parts Needed For 

Door Track Assembly

The door track assembly supports

the sliding doors and reinforces the

front wall.

Hint: The holes in the top side of

the door track are for fastening the

gable to the top of the front wall in a

later step.

1 Position door slides onto the legs,

from the end of door track, as shown

in the end view.

2 Set this piece aside for later use.

 9396 Door Track (1)

STEP

2

66769

Long Leg

on Top

Short Leg

on Bottom

STEP

1

9396

66769

ZX17

17

CORRECT INCORRECT

Long Leg

on top.

Door Slide

END VIEW

 9403 Front Floor Frame (1)

 Side Floor Assembly (2)

 9399 Rear Floor Frame (1)

 Parts Needed For 

Floor Frame

Step 5

ZX18

The  oor frame must be square

and level or holes will not align.

1 Assemble the four corners of

the  oor frame using two screws at

each corner as shown. At the front

corners fasten bolts through from

the bottom with nuts on top.

2 Measure the  oor frame diagonally.

When the diagonal measurements

are equal, the  oor frame is square.

NOTE

If using a wood platform or

concrete slab do not fasten the

 oor frames to your base at this

time. You will anchor the

building after it is erected.

STEP

1

10542

RIGHT

REAR

9399

Level

80007

RIGHT

FRONT

9403

STEP

2

When Diagonal Measurements

are Equal the Floor Frame

is Square.

FRONT

(8) (2)

18

1 Position front corner panels at the

corners of the  oor frame as shown.

The widest part of each corner panel

must be placed at the front of the build-

ing. Fasten the corner panels to the

 oor frame with two screws.

2 Position rear corner panels at rear

of building as shown. The widest part

of each corner panel must be placed

along side of the building. Fasten

corner panels to the  oor frame using

four screws.

3 Double-check the part numbers of

the wall panels, before proceeding.

NOTE

Be careful to install the correct

panel in each position as shown.

NOTE

The remainder of the building assembly

requires many hours and more than one

person. Do not continue beyond this

point if you do not have enough time to

complete the assembly today. A partially

assembled building can be severely

damaged by light winds.

Each screw and bolt in the wall requires

a washer.

 Parts Needed For 

Corners

Step 6  9389 Front Corner Panel (2)

 10681 Rear Corner Panel (2)

FRONT

STEP

TOP VIEW

10681

SIDE

REAR

Narrow

Side

9389 9389

SIDE

WideSide

10681

1

STEP

2

10681

9389

Panels rest on

frame as shown

STEP

3

ABO19

CORRECT INCORRECT

(12)

The  oor frame must be square

and level or holes will not align. 19

 9397 Rear Wall Angle (1)

 9925 Rear Wall Channel (1)

 Side Wall Channel Assemblies (2)

 Side Wall Angle Assemblies (2)

 Door Track Assembly (1)

 Parts Needed For 

Frames

Step 7

The main frame pieces give rigidity to

the side walls and provide a surface

for attaching the gables which sup-

port the roof.

1 Fasten the rear wall angle across

the inside top of the rear wall using

screws.

2 Fasten the rear wall channel

across the middle of the rear wall

using screws.

3 Fasten the side wall angles across

the inside top of the side panels using

screws. Side wall angles must overlap

rear wall angle in corners.

4 Fasten the side wall channels

across the middle of the side panels

using screws. Fasten overlaps in rear

corners with screws.

5 Fasten the door track assembly

(holes on top) across the top of the

front wall panels using screws. See

the  gure.

STEP

9397

3

9396

9925

Opening

Facing in

STEP

5

Long Leg

on Top

4

Short Leg

on Bottom

10541

FRONT

Wall Angles

Must Face

Inside

Building

DOOR TRACK ASSEMBLY

ZX20

STEP

2

STEP

1

(22) (2)

Right

Left

Right Left

20

Page is loading ...

Arrow BR67L Owner's manual

This manual is also suitable for

Arrow BR67L Owner's manual

Related papers

Other documents