ATX case
2x 5.25" drive bays (external), 1 mounting adapter for 2.5"
and 3.5" HDD/SSD included
4x 2.5" HDD/SSD bays (rail type) with removable design
3x 3.5" HDD bays (rail type)
1x 2.5" HDD/SSD bay (screw type)
Front I/O: 2x USB3.0 (internal 19-pin mainboard connector),
2x USB2.0, 2x audio
Quick fasteners
2 openings for water cooling
Acrylic side panel
Cable management system
Supports graphics card up to 32.5 cm in length
(up to 41.5 cm, if middle HDD cage is removed)
Dimensions: 480 x 235 x 460 mm (L x W x H)
Weight: ~6.5 kg
FAN CONFIGURATION:
Front panel: 1x 120 mm LED fan (pre-installed)
+ 1x 120 mm fan (optional)
Rear panel: 1x 120 mm LED fan (pre-installed)
Top panel: 2x 120 mm or 2x 140 mm or 1x 180 mm fan(s) (optional)