FAN CONFIGURATION:
Case front: 1x 120 mm fan (pre-installed)
Side panel: 2x 120 mm fan (optional)
Rear panel: 1x 120 mm fan (pre-installed)
ATX case VG4-V
1x slot cover, screw set, mounting material
PACKAGE CONTENT:
COMPATIBILITY:
Mainboard compatibility: mini-ITX, micro-ATX, ATX
Max. length graphics card: 31/38.5 cm (after removing the SSD
hard drive cage)
Max. height CPU cooler: 16 cm
Max. length PSU: 25 cm
ATX case
Mounting possibilities: 3x 5.25" drive bays (external) or
2x 5.25" drive bays + 1x 3.5" bay (external) + 3x 3.5" hard
drive bays (internal) + 4x 2.5" SSDs/HDDs (internal)
Front I/O: 2x USB3.0 (internal 19-pin mainboard connector),
2x USB2.0, 2x Audio
7 slots for expansion cards
Quick fasteners for two optical drives and three 3.5" hard drives
Installation opening for CPU cooler
2 openings for water cooling
Cable management system
Dimensions: 445 x 200 x 430 mm (L x W x H)
2x
3.5"
HDD BAYS
3x
2.5"
SSDs/ HDDs
4x
USB3.0
2x
USB2.0