Aerocool XPREDATORX3AVENGER Datasheet

FEATURES

• Solidly constructed chassis interior (0.7mm SPCC)

• Supports CPU cooler max. height up to 186mm(without fans on side panel)

• Supports Long VGA Cards up to 310mm

• Includes 1 x 14cm Black fan at rear and 1 x 20cm LED fan in front

• Top panel aps can be opened or closed to control air ow more eciently

• Dust lter for PSU

• Includes 1 x external 2.5” HDD docking on top panel for easy access

• Includes two fan controller knobs each controls fan/s up to 25W

• Install up to 9 fans

• Includes antivibration pads for HDDs and PSU

• Cable Routing Management holes with high-end rubber grommets to protect your cables

• Pre-drilled CPU holes for easy mounting and removable of CPU cooler

• Support water cooling

• 2 x USB3.0 and Audio/Mic ports are easily accessible from top panel

• USB3.0 >USB2.0 adaptor included

REFERENCE XPREDATORX3AVENGER

EAN 4713105952247

DIMENSIONS 527 (H) x 223 (W) x 533 (D) mm

PESO 10.36 Kgr.

Ud/ CAJA 1 Unidad

Ud/ PALET 14 Uds.

XPREDATOR X3

AVENGER

Case Type High Mid Tower

Material 0.7/0.6 SPCC Steel

Motherboards ITX / ATX / MicroATX

Drive Bays 3 x 5.25” external / 8 x HDDs internal/

1 x 3.5” external + 1 x 2.5”HDD Hot Swap Slot

Expansion slots 8

Max. length for PCI slots 310 mm

I/O Ports 2xUSB 3.0 / Audio + Mic / 2 x fan controler

Highest height for CPU cooler 186 mm