ATX case
2x 5.25" drive bays (external)
1x 3.5" mounting bay (external)
4x 2.5" HDD/SSD bays (rail type) with removable design
3x 3.5" HDD bays (rail type)
1x 2.5" HDD/SSD bay (screw type)
Top I/O: 2x USB3.0 (internal 19-pin mainboard connector),
2x USB2.0, 2x audio
Quick fasteners
2 openings for water cooling
FAN CONFIGURATION:
Front panel: 2x 120 mm fans (pre-installed)
Rear panel: 1x 120 mm fan (pre-installed)
Cable management system
Supports graphics cards up to 32.5 cm in length
(up to 41.5 cm, if middle HDD cage is removed)
Dimensions: 490 x 210 x 450 mm (L x W x H)
Weight: ~6.0 kg
2x USB3.0
2x USB2.0
Screwless
HDD / ODD
installation
Cable
Management
System