2. Vehicles & accessories
  3. Motor vehicle accessories & components
  4. Motorcycle Accessories
  5. HOLOVISION
  6. 403-W-PAN

HOLOVISION 403-W-PAN Installation guide

  • Hello! I've reviewed the installation instructions for the HOLOVISION intercom models 400-W-PAN, 403-W-PAN, 410-W-PAN, 401-W-PAN, 404-W-PAN, and 411-W-PAN. The document details how to connect these intercoms to Panasonic KSUs and Wiegand controllers, including wiring instructions and information about the included Essex keypad. I'm ready to assist you with any questions you might have about the installation process or features of these intercoms.
  • What Panasonic systems is this intercom compatible with?
    What is the access control system used in this intercom?
    Is there an option to connect a tamper switch?
Red 12+ to Wiegand Controller
Black 12- to Wiegand Controller
Green Data 0 to Wiegand Controller
White Data 1 to Wiegand Controller
Ground/Drain
For Green LED control
For Red LED control
For Site Code Modification
Manual Type 6.4.0.1-RF
Panasonic Compatible Intercom
For Models
400-W-PAN 401-W-PAN
403-W-PAN 404-W-PAN
410-W-PAN 411-W-PAN
Specifications
INSTALLATION
INSTRUCTIONS
501 E. Goetz Ave.
Santa Ana, Ca 92707
www.eholovision.com
Ph. 714-434-6904
Fax 800-362-0002
HOLOVISION
400 Series “W” Junction Board
Not Used
Connect tamper switch to alarm (optional)
Intercom to Panasonic KSU
Access Control
Essex KPT-26TI 26 bit Wiegand Keypad
Communication
For use with all Panasonic KSUs with door phone
card. This unit is a replacement for the Panasonic
KXT-30865 door phone.
Essex Keypad and PAN wiring
Page 2 Type 6.4.0.1-RF
To Wiegand Controller
COLineIn
To Phones
KSU
Strike 1
Door 1
/