Dometic CHX Bezel Removal Kit ISCHX88 Operating instructions

Brand: Dometic

Model: CHX Bezel Removal Kit ISCHX88

Type: Operating instructions

CHX Bezel Removal

Single & twin top mount controls

Copy Part# ISCHX88, Rev. 1 Page 1 of 2

Date: 01/2023

DISASSEMBLY INSTRUCTIONS

YOUR LOCAL DEALERYOUR LOCAL DEALER YOUR LOCAL SUPPORTYOUR LOCAL SUPPORT YOUR LOCAL SALES OFFICEYOUR LOCAL SALES OFFICE A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public ﬁlings of:

dometic.com/dealerdometic.com/dealer dometic.com/dometic.com/contactcontact dometic.com/sales-oﬃcesdometic.com/sales-oﬃces DOMETIC GROUP ABDOMETIC GROUP AB Hemvärnsgatan 15 SE-17154 Solna Sweden

Figure 1. Side view of the control assembly.

Figure 3. Side view of the control assembly.

Figure 2. Side view of the control assembly.

Figure 4. Side view of the control assembly.

1. Apply force to the forward

face of the bezel until tab 1

(item 1) disengages.

3. Apply force to the rearward

face of the bezel until tab 2

(item 2) disengages.

2. The forward portion of the

bezel will tilt up.

4. The bezel cover will then

separate from the bezel

base.

Separating a bezel cover

from a bezel base in a

mounted configuration

Copy Part# ISCHX88, Rev. 1 Page 2 of 2

Date: 01/2023

DISASSEMBLY INSTRUCTIONS

dometic.com/dealerdometic.com/dealer dometic.com/dometic.com/contactcontact dometic.com/sales-oﬃcesdometic.com/sales-oﬃces DOMETIC GROUP ABDOMETIC GROUP AB Hemvärnsgatan 15 SE-17154 Solna Sweden

3. Manually release tab 1 (item 1)

from the underside of the bezel.

5. Manually release tab 2 (item 2)

from the underside of the bezel.

2. Tab 1 (item 1) tab 2 (item 2).

4. The forward portion of the

bezel can then be tilted up.

6. The bezel cover can then be

separated from the bezel

base.

Separating a bezel cover

from a bezel base in an