2. AMG
  3. AMG2111L

AMG AMG2111L Instruction Sheet

  • I've reviewed the provided instruction sheet for the AMG2111L video receiver. This document details the specifications and features of the 1300nm rackmount single channel fiber optic receiver, including details about video and optical connections, sensitivity and mounting. I'm ready to answer your questions about this device.
  • What type of connector is used for video connection?
    What is the nominal output level?
    What type of optical connectors does the receiver use?
    What is the receiver's nominal sensitivity?
    What is the wavelength?
    Where does the device get power from?
AMG Systems Ltd. reserves the right to make changes to this document without notice.
The information herein is believed to be accurate. No responsibility however is assumed
by AMG for its use.
Page 1 of 1 D03655-00
AMG2111L
Instruction Sheet
AMG2111L 1300nm Rackmount Single Channel Video Only Fibre Optic Receiver
Video Connection
Connectors ...........................75 ohm BNC Socket.
Output Impedance ................75 ohm terminated.
Output Level.........................1 volt p-p nominal.
Frequency Response.............10Hz to 10MHz min.
Optical Connection
Connectors............................ST Style
Receiver Sensitivity
Gain...............................Up to –30dBm nominal.
No Customer adjustments are available within the unit.
Wavelength...........................1300nm nominal.
Dimensions
Height ...................................3U
Width....................................7HP
Depth ....................................205mm
Mounting Details
The AMG2111 plugs into and is powered from the AMG2000 Subrack
Indicators
Power....................................Green – lit when unit powered
Video Sync ........................... Green – lit when video signal present on optical input.
POWER
2111
1
SYNC
FIBRE
VIDEO
RECEIVER
/