Ergotron 100 Series Double Pivot User guide

Category
Flat panel wall mounts
Type
User guide

This manual is also suitable for

Ergotron 100 Series Double Pivot offers ergonomic monitor viewing and keyboard operation for a wide range of users. It allows for easy adjustment of monitor height, tilt, and rotation to ensure a comfortable and productive work environment. The pivot is designed for mounting flat-panel monitors or keyboards to either a vertical or horizontal surface. It features a durable construction and a weight capacity of up to 25 lbs, making it suitable for most monitors.

Ergotron 100 Series Double Pivot offers ergonomic monitor viewing and keyboard operation for a wide range of users. It allows for easy adjustment of monitor height, tilt, and rotation to ensure a comfortable and productive work environment. The pivot is designed for mounting flat-panel monitors or keyboards to either a vertical or horizontal surface. It features a durable construction and a weight capacity of up to 25 lbs, making it suitable for most monitors.

888-47-019-02 rev. N • 03/09
1 of 8
100 Series Flat Panel Monitor Pivots
Vertical Surface, Direct Mount
User's Guide
AB
1
2
#8-32 x 5/16"
#8-32 x 3/8"
a b
4X
4X
1/2"
1/2"
2
1
1x
#8-32
M4 x 10mm
M4 x 10mm
75-100mm
4x
4x
4x
1x
3/32"
a b
888-47-019-02 rev. N • 03/09
2 of 8
1
Determine Ergonomic Mounting Height
1.062"
(26.97mm)
1.062"
(26.97mm)
2
Determine Mounting Confi guration
WARNING
Because surfaces vary widely and the ultimate mounting method is out of Ergotrons control, it is
imperative that you consult with appropriate engineering, architectural or construction professional
to ensure that your Ergotron mounting solution is mounted properly to handle applied loads.
!
888-99-014
Rev E. 12/02 1 of 10 888-99-014-02
Ergonomic Mounting Heights
(for Flat Panel Monitors and Keyboards)
ERGONOMICS
Ergotron USA 1-800-383-1916
Ergotron Europe +31 20 312.29.39
Overview
When mounted properly, Ergotron
ARMS™ will provide ergonomic monitor
viewing and keyboard operation for a
wide range of users - whether sitting,
standing or in sit/stand situations.
The dimensioned drawings and formulas
contained in this guide can be used to
determine the ergonomically correct
mounting height of any of Ergotron's
Flat Panel Monitor/Keyboard solutions
mounted to either a vertical or a
horizontal surface. If mounting above
a worksurface, mounting heights may
change due to various worksurface
heights.
The Anthropometric Table on page
10 shows how mounting heights are
calculated based on the eye and elbow
heights of male and female operators.
To Mount your Flat Panel Monitor or Keyboard at an ergonomically
correct height, start at step 1 and continue as directed.
2
1
Center
Line of
mounting
holes
Top
of
Screen
Front View
Back View
X
Side View
X
FIND "x"
1
= Distance between Center line of Mounting Holes and Top of Monitor Screen.
2
1
Applications mounted to a
horizontal surface
Applications mounted to a 1.5" pole
FIND YOUR MOUNTING APPLICATION
2
2
6
6
6
8
9
9
9
USE "x"
to calculate mounting height for your application.
HD Laptop
Tray
3
8
2 33
4 5
77
888-47-019-02 rev. N • 03/09
3 of 8
3
Mount Pivot
a
b
4
5
75 mm
100 mm
X mm
+
a
b
#8-32 x 5/16"
4X 4X
#8-32 x 3/8"
4
Attach Monitor
c
d
888-47-019-02 rev. N • 03/09
4 of 8
M4 x 10 mm M4 x 10 mm
#8-32
4x
3/32"
If your monitor uses a screw size other than M4 x 10mm,
DO NOT use the M4 x 10mm screws or knob provided as
they could result in damage to the monitor.
!
75 mm
100 mm
c
d
4x
M4 x 10 mm M4 x 10 mm
4x
888-47-019-02 rev. N • 03/09
5 of 8
6
Side-to-Side Motion
Move monitor side-to-side through entire range of motion. If it does not stay
in place at any point it will need adjustment - see below. Adjust so side-to-side
moving forces are equal.
Adjust Side-to-Side
To Increase Tension: Turn screw clockwise.
To Decrease Tension: Turn screw counterclockwise.
5
Tilt Motion
Tilt monitor up and down through entire pivot range of motion. If it does not stay in place or
movement in one direction is stiff, pivot needs adjustment - see below. Adjust until monitor
stays in place and tilting forces, up or down, are equal.
Adjust Tilt
To Increase Tension: Turn screw clockwise.
To Decrease Tension: Turn screw counterclockwise.
1/2"
1/2"
1/2"
1/2"
888-47-019-02 rev. N • 03/09
6 of 8
7
Portrait/Landscape
Rotate monitor from Portrait to Landscape through entire range of motion. If
it does not stay in place or movement in one direction is stiff, tension needs
adjustment - see below. Adjust until monitor stays in place and tension,
portrait to landscape, is equal.
Adjust Portrait/Landscape
To Increase Tension: Turn screw clockwise.
To Decrease Tension: Turn screw counterclockwise.
8
1/2"
888-47-019-02 rev. N • 03/09
7 of 8
* Weight Capacities:
5 - 25 lbs
(2 - 11.4 kgs)
5 - 23 lbs
(2 - 10.5 kgs)
?
Troubleshooting
Symptom Probable Cause Solution
Monitor tilts up and down too
easily or with diffi culty.
Pivot Tension needs adjustment.
8
Tilt Motion
Monitor exceeds weight capacity*.
Monitor moves side-to-side too
easily or with diffi culty.
Pivot Tension needs adjustment.
9
Side-to-Side
Motion
Monitor rotates from portrait
to landscape too easily or with
diffi culty.
Pivot Tension needs adustment.
10
Portrait/
Landscape
6
5
5
888-47-019-02 rev. N • 03/09
8 of 8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Ergotron 100 Series Double Pivot User guide

Category
Flat panel wall mounts
Type
User guide
This manual is also suitable for

Ergotron 100 Series Double Pivot offers ergonomic monitor viewing and keyboard operation for a wide range of users. It allows for easy adjustment of monitor height, tilt, and rotation to ensure a comfortable and productive work environment. The pivot is designed for mounting flat-panel monitors or keyboards to either a vertical or horizontal surface. It features a durable construction and a weight capacity of up to 25 lbs, making it suitable for most monitors.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI