V-ZUG 34004 Installation guide

Brand: V-ZUG

Model: 34004

Type: Installation guide

V-ZUG 34004 warming drawer is designed to keep your food warm and ready to serve. It features a spacious drawer that can accommodate various dish sizes. The adjustable temperature control allows you to set the ideal temperature for different types of food, ensuring that your dishes are kept at the perfect serving temperature without overcooking. It's easy to install and operate, making it a convenient addition to your kitchen.

Installation instructions

Warming drawer 60-162

J34004.113-0

18.7.12 FUW

These installation instructions apply to the model: 34004

Identification plate

A Remove the drawer. The identification plate is located on the left-hand side next to the dial.

Refer to the identification plate for specifications for the required mains voltage, current type and fuses.

Application height of the appliance: up to max. 2000 m above sea level

1. Fix a bracket set 60 (not included in the scope of delivery) for an

appliance located above or below.

2. Place appliance in front of the niche and connect mains cable.

3. Carefully slide appliance into the niche until it is flush with the front

of the cabinets, ensuring that the mains cable is not pinched.

4. Open the drawer and fix in place from the front, using the 4 supplied

screws A.

The appliance should be installed by qualified personnel only. Each step must be carried out and checked in full in the order

specified.

Validity

General notes

If fitting in flammable material, the guidelines and standards for low voltage installations and for the fire protection must be strict-

ly observed.

Electrical connections

Electrical connections must made by qualified personnel in accordance with the guidelines and standards for low voltage in-

stallations and the specifications of the local electricity supply companies.

A plug-in appliance may only be connected to a socket outlet with earthing contact, installed according to specifications. An

all-pole mains isolating device with 3 mm contact opening should be provided in the house wiring system. Switches, plug and

socket devices, circuit breakers and fusible cut-outs which are accessible after installation and which have all-poles switching

are permissible as isolating devices. Effective earthing and separately installed neutral and earth conductors ensure safe and

fault-free operation. After installation, live parts and cables with basic insulation must not be accessible. Old installations should

always be checked.

Installation

The drawer must be secured by 4 screws to prevent tipping.

Ensuring that the mains cable is not pinched. After installation, the mains cable must not touch the back and the bottom of the

appliance.

Installation instructions

Warming drawer 60-162

J34004.113-0

18.7.12 FUW

Built-in solo

Installing with oven

min. 550

162

560–568

596

547

160

600

598160

596

547

600

min. 550

560–568

756

594

567

Detail X

594

Niche

598

Appliance

V-ZUG 34004 Installation guide

V-ZUG 34004 Installation guide

V-ZUG 34004 Installation guide

Related papers

Other documents