Maytag PGC2MQ User manual

Brand: Maytag

Model: PGC2MQ

Category: Thermostats

Type: User manual

ELITE PROGRAMMABLE THERMOSTAT WITH MENU DRIVEN DISPLAY

User’s Manual

•Customizableprogrammingoptionsforevery

day,weekdays,weekends,orindividualdays.

•Smart recovery gradually adjusts indoor

temperaturesforgreatercomfort.

•Communicatestovariouscomponentswithin

theiQDrive

system.

•Auto changeover automatically switches the

thermostat from heating to cooling or vice

versa,basedonprogrammedsetpoints.

•ServesastheprimarycontrollerforaniQZone

system.

•No batteries required. Settings are stored

internallyintheeventofpowerfailure.

•On-board diagnostics alert when service or

maintenanceisneeded.

•Two color backlight for easy viewing of the

displayatnighttimeorinpoorlylitrooms.

•Energysavingfeatures(temperaturesetbacks,

heatpump/electricheatorfurnacechangeover)

arecustomizable.

•Sensesandcontrolstemperatureandhumidity.

•Providessystemmaintenancereminders.

FEATURES:

DO NOT DESTROY THIS MANUAL. KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

70°

HUMIDITY

HEAT

FAN AUTO

MODE MENU

FAN

RH TEMP

1/19/09

10:00 AM

OUTDOOR

HEAT 70

COOL 80

Date, Day, Time,

Maintenance Reminders

or Service Issues

Temperature at

Outdoor Unit

Indoor

Temperature

Indoor

Humidity

Level

Menus

Heat & Cool

Setpoints

Fan Setting

Navigation and

Entry Buttons

Mode of Operation

ABOUT THE IQ DRIVE THERMOSTAT ..............3

Navigation...................................................................... 3

MainScreen.................................................................. 3

SCREEN SETTINGS ...........................................4

Date&Time................................................................... 4

AutoDaylightSaving..................................................... 4

FahrenheitorCelsius.................................................... 5

12or24HourClock....................................................... 5

Contrast......................................................................... 5

BacklightONTime......................................................... 5

OPERATING THE THERMOSTAT .......................6

SelectinganOperatingMode........................................ 6

OffMode................................................................... 6

AutoMode................................................................. 6

CoolMode................................................................ 6

HeatMode................................................................ 6

E-HeatMode........................................................... 6

TemperatureHolds........................................................ 6

TemporaryHold........................................................ 6

PermanentHold........................................................ 6

VacationHold............................................................ 7

CancelingaHold...................................................... 7

FanOperation................................................................ 7

On............................................................................. 7

Auto........................................................................... 7

VentilationSpeed...................................................... 7

ProgrammedFan...................................................... 8

IntermittentFan......................................................... 8

SecurityLockout............................................................ 8

HowtoLocktheThermostat..................................... 8

HowtoUnlocktheThermostat.................................. 8

WhattoDoIfYouForgetYourPINNumber............. 8

TABLE OF CONTENTS

PROGRAMMING THE THERMOSTAT ................9

ChangingProgramSchedules....................................... 9

CopyingaProgram........................................................ 9

ChangingtheTimeofanEVENT................................10

ChangingtheHEATSetpoint.......................................10

ChangingtheCOOLSetpoint......................................10

ChangingtheFANSetting...........................................10

ADVANCED THERMOSTAT SETTINGS .......... 11

ProgramScheduleUsage...........................................11

ProgrammableOptions...........................................11

NonprogrammableOption.......................................11

AutoChangeoverTime................................................12

SmartRecovery...........................................................12

Dehumidication..........................................................12

MinimumHeatPumpUsageTemperature...................13

BackupHeatResponse...............................................13

Offsets.........................................................................14

IndoorTemperature.................................................14

RemoteTemperature..............................................14

OutdoorTemperature..............................................14

RelativeHumidity....................................................14

HeatAnticipator......................................................14

HumidityControl..........................................................14

Humidify/Dehumidify.............................................14

ZONE CONTROL OPERATION ....................... 15

MAIN SCREEN DIAGNOSTIC MESSAGES .... 16

IQ DRIVE® THERMOSTAT SCREEN MAP ..... 17

IQ DRIVE® THERMOSTAT DEFAULT

SETTINGS ........................................................ 18

ABOUT THE IQ DRIVE THERMOSTAT

•TheiQDriveThermostatisawallmountedcontroller

that accurately maintains room temperature by

controlling conventional or iQ Drive compatible

components in a heating and air conditioning

system. Easy-to-use operating modes activate

coolingequipment(heatpumporairconditioner)

duringwarmseasonsandheatingequipment(heat

pump,electricheater,gasfurnaceorheatpump/

electricheatcombination)whenthetemperature

getscolder.Foroperatingmodesetupinstructions,

Seepage6.

•TheiQDriveThermostatservesastheprimary

controllerforhomesequippedwiththeiQZone

system.Insuchsystemstherewillbeaseparate

zonethermostatineachofthezonessetup,in

additiontothiscontroller.SeetheiQZoneSystem

ZoneThermostatUser’sManualforinformationon

howtooperatethelocalzonethermostats.Seethe

ZoneControlsection(page13)foradescription

ofoperationandfeatureswhichonlyapplytoiQ

Zonesystems.

•Dehumidicationmodequicklyremovesmoisture

from the air and regulates humidity levels

throughoutthehome.Controloutputforoptional

humidierisalsoprovided.Seepage12.

•The blue backlight feature makes viewing the

screeneasieratnightorinpoorlylitrooms.The

backlight turns on for a certain amount of time

when any one of the five buttonsis pressed.

Thedurationthatthebacklightstaysoncanbe

programmedfor30,60,90,120seconds,orON.

Seepage5.

•Completesystemmonitoringalertsthehomeowner

whenserviceisneeded.

Navigation

•Navigationbetweendisplayscreensorchanging

operatingcommandscaneasilybemadebyusing

thevekeystotherightofthescreen(seepage2).

NOTE: Selectinganitemmeansthat itsnameor

valueappearsinahighlightedbandonthescreen.

Anotherbuttonwillneedtobepressedafterwards

toaccessanothermenuortoselectorchangea

value.

•The

 buttonsnavigateupordowninascreen,

withinalistofchoices,ortoincrease/decreasea

number.NOTE: Onsomescreensholdingthese

buttonsdownforseveralsecondswilladjustthe

valueinlargerincrements.

*Outdoortemperaturecanonlybedisplayedifaheatpump

oriQDriveACisinstalledoutside.

•The  buttonsnavigaterightorleftinascreen,

ormovetothepreviousornextscreenwithina

screensequence.

•The buttonselectsanoptioncategoryorvalue

so that it can change or save a modied entry.

NOTE: Whenavalueisselected,thedarkband

willblinkinmostscreens.

Main Screen

•The main screen of the iQ DriveThermostat

displays normal system information including:

indoor temperature, outdoor air temperature*,

heating and cooling setpoints, fan setting, relative

humidity,andthesystem’scurrentoperatingmode

(Seepage2).

•The top line of the Main

Screenalternatesbetween

showing: date and time,

day of the week, service

alerts such as: change

air ﬁlter, change UV lamp,

service air cleaner, or

service humidiﬁer,Status

infosuchas:hold until, perm hold, smart recovery

on, intermittent fan on,andlocked.Intheeventof

anequipmentissue,aone-linedescriptionofthe

issuewillalsodisplay.Inresponsetoanextended

or repeated problem, the screen will ash red

indicatingserviceisneeded.Seepage2.

70°

HUMIDITY

HEAT

FAN AUTO

MODE MENU

FAN

RH TEMP

1/19/09

10:00 AM

OUTDOOR

HEAT 70

COOL 80

IMPORTANT! If the Main Screen ashes red

or displays CONFIGURATION NEEDED with

amessageatthetopofthescreen,contactan

authorizedinstallerimmediatelywithadetailed

descriptionofthemessage.OnlyiQDrivecertied

technicianscancorrecttheseconditions.

•ThebottomlineoftheMainScreendisplaysve

menus[RH,TEMP,MODE,FANandMENU]that

areentrypointstoothersubmenus(seepage2).

Toaccessthesescreens,selectthemenuwiththe

 buttonsandthenthe button.Toreturntothe

MainScreen,pressthe buttonrepeatedlyfrom

anyscreen.Ifnobuttonsarepressedfor3minutes,

thethermostatwillautomaticallyrevertbacktothe

MainScreen.Ifaservicealertappearsatthetop

oftheMainScreen,CANCELALERTwillalsobe

displayedatthebottom.Tocancelthealert,use

the or buttonsandthenthe button.

•TheMainScreenwillappeardifferentforiQZone

systemswhenZoneControlisenabled(normal

operation).ForZoneControl,seepage13.

11.SettheDAY:

i The  button adjusts

thedayforwardandthe

buttonadjuststheday

backward.

12.Pressthe buttontosave

thesetting.

13.SettheHOUR:

i The  button adjusts

thehourforwardandthe

buttonadjuststhehour

backward.

14.Pressthe buttontosave

thesetting.

15.SettheMINUTE:

i The  button adjusts

theminutesforwardand

the buttonadjuststhe

minutesbackward.

iHoldingthe or button

downforseveralseconds

will adjust the value in

largerincrements.

16.Pressthe buttontosave

thesetting.

1. Select MENU on the

Main Screen using the

or button.

2. Pressthe

button.

3. Select SET DATE AND

TIMEusingthe

or 

button.

4. Pressthe

button.

5. Select SET DATE AND

TIMEusingthe

or 

button.

6. Pressthe

button.

7. SettheYEAR.

iThe

 button adjusts

theyearforwardandthe

buttonadjuststheyear

backward.

8. Pressthe

buttontosave

thesetting.

9. SettheMONTH:

iThe

buttonadjuststhe

month forward and the

 button adjusts the

monthbackward.

10.Pressthe

buttontosave

thesetting.











Date & Time

TheSETDATEandTIMEscreencontainsthesetupmenusforchangingthecurrentdateandtimethat

isdisplayedontheMainScreen.

SCREEN SETTINGS

Manyitemsthataredisplayedonthemainscreencanbeeasilychangedbythehomeowner.Someof

theseitemsinclude:Settingthedateandtime,12or24hourclock,autodaylightsaving,temperature

readingsinFahrenheitorCelsiusscalesandbacklightontimer.







SET YEAR









SET MONTH









SET HOUR











SET MINUTE



Auto Daylight Saving

Thisthermostatcanbesettoautomaticallyobservethenewdaylightsavinghoursestablishedin2007:

betweenthesecondSundayofMarchtotherstSundayinNovember.

1. SelectMENUontheMainScreenusingthe

or button.

2. Pressthe

button.

3. SelectSETDATEANDTIMEusingthe

or button.

2. Pressthe

button.

4. SelectAUTODAYLIGHTSAVINGusingthe

or button.

5. Pressthe

button.

6. SelectONorOFFusingthe

or button.

7. Pressthe

buttontosavethesetting.















SET DAY



Fahrenheit or Celsius

Theindoorandoutdoortemperaturesdisplayedon

themainscreenofthethermostatcanbechanged

totheFahrenheitorCelsiusscale.

Backlight ON Time

Thebluebacklightfeaturemakesviewingthescreen

easieratnightorinpoorlylitrooms.Thebacklight

turnsonforacertainamountoftimewhenanyone

ofthevebuttonsarepressed.Thedurationthat

thebacklightstaysoncanbeprogrammedfor30,

60,90,120seconds,orON(allthetime).

Contrast

Thecontrastlevelofthescreencanbechangedfrom

1(lightest)to15(darkest).Thelevelisadjustablein

incrementsof1.NOTE:Ifpowertothethermostat

isshutoff,thecontrastlevelwillreturntothedefault

setting(4)whenpowerisrestored.

































































































12 or 24 Hour Clock

The time displayed on the main screen of the

thermostatcanbesettodisplaytheclockin12hour

(standard)timeor24hour(military)time.

1. SelectMENUonthe

Main Screen using

the or button.

2. Pressthe

button.

3. Select SETTINGS

using the

 or 

button.

4. Press the

 button.

The SETTINGS

MENU will appear

in the display with

SCREENSETTINGS

alreadyselected.

5. Press the

 button.

The SCREEN

SETTINGS MENU

will appear in the

display with the

temperature scale

alreadyselected.

6. Pressthe

button.

7.Change the

temperaturescale.

iUse the

button

to change the scale

to Celsius or the 

buttontoFahrenheit.

8. Pressthe

buttonto

savethesetting.

1. SelectMENUonthe

MainScreenusingthe

or button.

2. Pressthe

button.

3. Select SETTINGS

using the

 or 

button.

4. Pressthe

button.

5. Select SCREEN

SETTINGSusing the

or button.

6. Pressthe

button.

7. Select the option

beneath 12 or 24

HOURCLOCKusing

the

or button.

8. Pressthe

button.

9. Change the clock

type:

iThe

buttonchanges

thetimeto24hourand

the

buttonchanges

thetimeto12hour.

10. Press the

button

tosavethesetting.

1. SelectMENUonthe

Main Screen using

the

or button.

2. Pressthe

button.

3. Select SETTINGS

using the

 or 

button.

4. Pressthe

button.

5. Select SCREEN

SETTINGSusingthe

or button.

6. Pressthe

button.

7. Select the option

beneathCONTRAST

using the

 or 

button.

8. Pressthe

button.

9. Changethecontrast

level.

iUse the

buttonto

darkenthecontrastor

the buttontolighten

thecontrast.

10.Pressthe

buttonto

savethesetting.

1. SelectMENUonthe

Main Screen using

the

or button.

2. Pressthe

button.

3. Select SETTINGS

using the

 or 

button.

4. Pressthe

button.

5. Select SCREEN

SETTINGSusingthe

or button.

6. Pressthe

button.

7. Select the option

beneathBACKLIGHT

ON TIME using the

or button.

8. Pressthe

button.

9. Change the value

to 30, 60, 90, 120

seconds, or ON (all

the time) using the

or button.

10.Pressthe

buttonto

savethesetting.

Selecting an Operating Mode

OFF MODE: Deactivates all equipment in the

heating/coolingsystem.Thefurnace,airconditioner,

orheatpumpwillnotoperatewheninthismode.

However,thefancanbesettooperateinoffmode.

SeeFanOperation(pages7-8).

AUTO MODE: The thermostat chooses the

appropriatemode(HEATorCOOL)formaintaining

the desired temperature between the congured

heatingandcoolingsetpoints.Topreventthesystem

fromjumpingbackandforth,thecontrollerwaitsfor

theautochangeovertimetoendbeforechanging

modes.Seepage12formoreinformaton.

COOLMODE:Activatescoolingequipment(Heat

PumporAirConditioner)duringwarmerseasons.

HEATMODE:Activatesheatingequipment(Heat

Pump,ElectricHeater,GasFurnace,etc.)during

coldseasons.

E-HEATMODE:ForsystemswithHeatPumps,this

modewillheatonlyusingseparategasorelectric

heat.Thiswilldisableheatpumpoperation.

1. Select MODE on the Main Screen using the

or button.NOTE: TheMODEMENUcanalso

beaccessedthroughMENUontheMainScreen.

2. Pressthe

button.

3. Select AUTO, COOL, HEAT, E HEAT, or OFF

usingthe

or button.

4. Pressthe

button.

NOTE: When changing modes, the system may

continueinthepreviousmodeforafewminutesto

avoidsuddenchanges.

Temperature Holds

By default, the iQ DriveThermostat operates by

controllingtemperaturetoatimedschedule;however,

ifdesired,youcanoverridethecurrenttemperature

setpointintheProgramMenu.Temperatureholds

canbeusedforquicktemperaturechangeswithout

havingtomodifythethermostat’sProgramMenu.

Thisfunctionisnotavailablewhenthethermostatis

settothenonprogrammableoption.NOTE:Holding

the

or buttondownforseveralseconds will

adjustsomeofthevaluesinlargerincrements.

OPERATING THE THERMOSTAT

TheiQDriveThermostatcancontrolconventionaloriQDrivecompatibleequipmentintheheatingor

coolingsystem.Beforetheheatingor cooling system can beactivated,anoperatingmodesuchas

AUTO,COOL,HEAT,orEHEATmustbeselected.Manyofthefeaturesdescribedbelowarenotused

withaniQZonesystemwhenZoneControlisenabled.ForZoneControl,seepage13.

PermanentHold

A permanent hold can be used to override the

temperaturesetpointsinthetimedprogram.Just

set the temperature to a desired setting and the

thermostatpermanentlymaintainsthetemperature

until the hold is cancelled on the Main screen.

NOTE: Thisoptionisonlyusedwhenthethermostat

isinprogrammableoperation.

1. Select MENU on the Main Screen using the

or button.

2. Pressthe

button.

3. SelectHOLDusingthe

or button.

4. Pressthe

button.

5. SelectPERMANENTusingthe

or button.

6. Pressthe

button.

7. Changethetemperaturesetting:

iThe

 button raisesthe temperature and the

buttonlowersthetemperature.

8. Pressthe

buttontosavethesetting.

NOTES:

•CANCELHOLDwillappearatthebottomofthe

Mainscreen.Tocancelthehold,seepage7.

•A permanent hold can be modied by simply

pressingthe

or buttonwhentheMainscreen

isdisplayed.

TemporaryHold

TemporaryHoldschangethetemperaturesetpoint

untilthe nextprogrammedeventand can beset

usinganyofthesetwomethods:

METHOD 1: Change the temperature setting by

pressing the  or  button anytime the main

screenisdisplayedduringsystemoperation.When

the desired temperature is displayed, press the

buttontosavethesetting.

METHOD 2: Select TEMP on the Main Screen

using the  or button and then the button.

Change the temperature setting using the or 

button.Whenthedesiredtemperatureisdisplayedon

thescreen,pressthe

buttontosavethesetting.

NOTE: CANCELHOLDwillappearatthebottomof

theMainScreen.Theholdcanbecanceledusing

thestepsonpage7orallowedtoexpireatthetime

shownintheHOLDTHISTEMPERATUREscreen.

1. SelectMENUonthe

Main Screen using

the or button.

2. Pressthe

button.

3. Select HOLD using

the

or button.

4. Pressthe

button.

5. Select VACATION

using the

 or 

button.

6. Pressthe

button.

7. Changethetempera-

turesetting:

iThe

buttonraises

thetemperatureand

the  button lowers

thetemperature.









60°

VacationHold

Avacationholdcanbeusedtocontroltheheating/

cooling system when away from home for an

extendedamountoftime.Justsetthetemperature

toholdthehouseat,andthedateandtimewhen

you want the hold to expire.The thermostat will

maintainthetemperatureuntiltheholdiscancelled

orexpires.









5/08/09















10.Pressthe buttonto

savethesetting.

11.Changethetime:

i The

buttonadjusts

the minutes forward

and the  button

adjusts the minutes

backward.

12.Press the

 button

to save the setting.

CANCELHOLDwill

appearatthebottom

oftheMainscreen.

NOTE: Avacationhold

temperature setting

can be modied by

pressingthe

or 

buttonwhentheMain

screenisdisplayed.

8. Pressthe

buttonto

savethesetting.

9. Changethedate:

iThe

buttonadjusts

the day forward and

the

 button adjusts

thedaybackward.

CancelingaHold

1. Select CANCEL HOLD

ontheMainScreenusing

the or button.

2. Press the

 button.

NOTE: The CANCEL

HOLD disappears from

theMainscreenandthe

setpoints revert to the

programmedschedule.

Fan Operation

Multiplefanoptionsareavailablewhenrunningthe

heating/coolingsystem.Thedefaultsettingforthe

iQthermostatisAUTO.

1. Select FAN on the

Main Screen using the

or button.NOTE:The

FANMENUcanalsobe

accessedthroughMENU

ontheMainScreen.

2. Pressthe

button.

3. Select AUTO, ON or

PROGRAMMEDFANusingthe

or button.

4. Pressthe

buttontosavethesetting.

Thefanwillruncontinuouslywithoutoperatingany

heatingorcoolingequipment(includingOFFmode).

Thefanspeedismanuallysettodifferentspeeds

using the  or  buttons

andisindicatedbythebar

graph in the Manual Fan

Speedscreen.Whenheating

orcoolingisneeded,thefan

speedchangesasneeded.

NOTE: In fan mode, the

humidification option is

turnedonbydefault.

VentilationSpeed

Thisscreenlookssimilartothescreenabove,with

thebargraphforspeedselection.Itisforusewith

iQZonecontrolonly.

Auto

Thefanswitchesonwhenthethermostatsenses

theneedforheatingorcoolingandwillrunforthe

durationoftheoperation.Whentheheating/cooling

equipmenthasshutoff,thefanwillcontinuetorun

forashortperiodoftimeafterwards.











70°

HUMIDITY

HEAT

1/19/09 10:00 AM

FAN AUTO

MODE

TEMP MENU

FAN

70°

HUMIDITY

HEAT

1/19/09 10:00 AM

FAN AUTO

MODERH

MENUFAN

CANCEL

HOLD

Security Lockout

SecurityLockoutpreventsaccidentalorunauthorized

changingof the thermostatsettings.Thisfeature

allows either the total lockout of the keypad or

lockoutofeverythingbutthetemperaturesetpoint

adjustment. Both options require a 4 digit PIN

numbertobeenteredandsaved.NOTE:Security

lockoutwillnotpreventchangingsettingsinlocal

zonethermostatsinaniQZonesystem.

IntermittentFan

Thefanwillrunforupto20minutesandthenturnoff

forupto40minutesifthethermostatdoesn’tsensea

needforcoolorheatforatleastonehour.Thisoptionis

typicallyusedwhenrunningtheheating/coolingsystem

inavacationorpermanentholdsetting. Settingthe

FANONtimetoOFFdisablesthisfeature.Seepage

6or7forHOLDsetupinstructions.





















1. SelectMENUontheMainScreenusingthe 

or

button.

2. Pressthe

button.

3. SelectSETTINGSusingthe

or buttons.

4. Pressthe

button.

5. SelectINTERMITTENTFANusingthe

or 

button.

6. Pressthe

button.NOTE:TheINTERMITTENT

FAN menu will appear in the display with the

valuebeneathFANONTIMEalreadyselected.

7. Pressthe

button.

8. ChangetheFANONTIMEtoOFForbetween

5-20minutes.

iThe

buttonadjuststhe

time 5 minutes forward

andthe buttonadjusts

the time 5 minutes

backward.

9. Press the

 button to

savethesetting.

10.Select FAN OFF TIME

usingthe

or button.

11.Pressthe button.

12.Change the FAN OFF

TIME between 5 - 40

minutes.

i The buttonadjuststhe

time 5 minutes forward

andthe buttonadjusts

the time 5 minutes

backward.

13. Press the

button to

savethesetting.

NOTE: ThefanON&OFFcycleswillcontinueuntilthe

fanhasbeencalledforheatingorcooling.

ProgrammedFan

Thefanwilloperatebasedonthefansetting(ONor

AUTO)intheProgramSchedule.Setupinstructions

areshownonpage10.

WhattoDoIfYou

ForgetYourPIN

Number:

ReturntothePINlogon

screen and type in the

code9999.Thiswillclear

outthelockandresetall

valuesbackto0000.

HowtoUnlockthe

Thermostat:

1. Pressthe buttonto

accessthePINlogon

screen.

2. Entertherstdigitof

the lockout number

using the

 or 

button. When the

desired number is

displayed, press the

button to jump to

thenextdigit.Repeat

thisprocessuntilthe

naldigitisentered.

3. Press the

button

after the last digit

has been entered.

The thermostat is

nowunlockedandwill

remainunlockeduntil

PINisre-entered.

HowtoLockthe

Thermostat:

1. SelectMENUonthe

MainScreenusingthe

or button.

2. Pressthe

button.

3. Select SECURITY

LOCKOUT using the

or button.

4. Pressthe

button.

5. Select the type of

lockout using the

or button.

6. Pressthe

button.

7. Entertherstdigitof

thePINnumberusing

the

 or  button.

When the desired

numberisdisplayed,

pressthe

buttonto

jumptothenextdigit.

Repeat this process

untilthenaldigitis

entered.

8. Press the

button

after the last digit

has been entered.

The PIN number is

savedinternallyuntil

the thermostat is

unlocked.

IMPORTANT! Writeyour

PIN number down on

page 16 and store this

manual in a safe place

forfuturereference.

















 

















 

1. Select COPY at the

top of the PROGRAM

MENU using the

or button.

2. Pressthe

button.The

thermostatwilldisplaya

listofdaystocopyfrom.

3. SelectadayintheCOPY

FROMlistusingthe



or button.

4. Pressthe

button.The

thermostatwilldisplaya

listofdaystocopyyour

programto.

5. SelectadayintheCOPY

TOlistusingthe

or 

button.

6. Press the

 button

to save the setting.

NOTE: To schedule

additional days, repeat

steps3-6.

Copying a program:

The COPY option is displayed at the top of the

PROGRAM MENU and can be used to copy a

schedulefromonedaytomanyotherdayswithout

havingtoperformredundantprogrammingofthe

thermostat.Thisfeaturecanbeusedafteraschedule

hasbeensetinoneofthedays.

Changing Program Schedules

EachdayinthePROGRAMMENUcontains2or

4customizableschedules(alsocalledevents)that

display the TIME an event begins, temperature

setpoints (HEAT and COOL), and FAN setting

(AUTOorON).Thedefaultsettingforthisthermostat

is 4 Schedule Events/Day,butcanbechangedby

performingthesetupinstructionsonpage11.The

thermostatrequiresthattheCOOLsetpointmust

beat least2° (F)above theHEAT setpoint.This

minimumdifferenceisautomaticallymaintainedby

thethermostat.NOTE:Holdingthe

or button

downforseveralsecondswilladjustsomeofthe

valuesinlargerincrements.

PROGRAMMING THE THERMOSTAT

The iQ Drive Thermostat is factory programmed with default schedules based on typical usages.

Modicationoftheprogramschedulesisnotrequired,butcanstillbecustomizedtoadjusttheheating/

coolingsystemonindividualdays,acombinationofdays,weekdays,weekends,everyday,oranentire

week.TheinstructionsbelowdonotapplytoiQZoneSystemswithzonecontrolenabled.Before the

heating or cooling system can be activated, the thermostat must be placed in an operating mode

(AUTO, HEAT, COOL, or E HEAT). See Page 6 for mode setup instructions.

Otherfeaturesincludeanonprogrammableoptionthatmanuallycontrolstheheatingorcoolingequipment

by disabling the usage of all programming schedules, Smart Recovery, and temperature holds. In

nonprogrammableoperation,thethermostatrequireslessusersetup.Ifthisoptionisdesired,seepage

11forsetupinstructions.

































































































1. SelectMENUonthe

MainScreenusingthe

or button.

2. Pressthe

button.

3. Select PROGRAM

using the

 or 

button.

4. Pressthe

button.

5. Select an option

from the list in the

PROGRAM MENU

using the

 or 

button.

6. Pressthe

button.

7. See page 10 to

change the time of

anEVENT,theHEAT/

COOL setpoints, or

FANsetting.





























Changing the Time

of an EVENT:

1. Select the starting

time for the EVENT

using the

 or 

button.

2. Pressthe

button.

3. Change the time of

theevent:

The buttonadjusts

the minutes forward

and the

 button

adjusts the minutes

backward.

4. Press the

 button

tosavethesettingor

press the

 button

to jump to another

column.

Changing the

COOL Setpoint:

1.Selectthetemperature

to be changed in the

COOLcolumnusingthe

  buttons.

2.Pressthe

button.

3.Change the COOL

setpoint:

iThe  button raises

the temperature and

the

 button lowers

thetemperature.

4.Press the

 button

to save the setting or

press the

 button

to jump to another

column.

Changing the

FAN Setting:

1. Select the FAN

setting using the

  buttons.

2. Pressthe

button.

3. Change the FAN

setting:

The buttonchanges

thefantoONandthe

buttonchangesthe

fantoAUTO.

4. Press the

 button

tosavethesettingor

press the

 button

to jump to another

column.

































2 Events/Day Business

































2 Schedule Events/Day



















































4 Schedule Events/Day



















































4 Schedule Events/Day

































2 Events/Day Business

































2 Schedule Events/Day



















































4 Schedule Events/Day

































2 Schedule Events/Day

































2 Events/Day Business

































2 Schedule Events/Day

































2 Events/Day Business



















































4 Schedule Events/Day

Changing the

HEAT Setpoint:

1. Selectthetemperature

to be changed in the

HEATcolumnusingthe

  buttons.

2. Pressthe

button.

3. Change the HEAT

setpoint:

iThe  button raises

thetemperatureand

the  button lowers

thetemperature.

4. Press the

 button

tosavethesettingor

press the

 button

to jump to another

column.

Program Schedule Usage

This thermostat contains customizable energy-

saving schedules (also called events) that can

adjusttheheating/cooling system 2or4times a

dayonindividualdays,everyday,justweekdays,

just weekends, an entire week or a combination

of days. Residential systems can be setup for a

2eventor4eventperdayschedule.Companies

canset theirscheduleto2eventsperdayusing

the business option. By default, this thermostat

is factory set to a 4 Schedule Events/Day. If

the nonprogrammable option or other event

schedule is desired, then this setting must be

changed before programming the thermostat.

NOTE:Fullprogrammableoperationmayberesumed

byperforming steps 1- 9 below and selecting a

programmable option in the program schedule

usagemenu.Programmableandnonprogrammable

optionsinthisthermostatdonotapplytoiQZone

systemswithzonecontrolenabled.

ADVANCED THERMOSTAT SETTINGS

TheiQDriveThermostatfeaturesadditionalne-tuningoptionsthatcanincreasecomfort,saveenergy,

andmaximizetheperformanceoftheheatingandcoolingsystem.Thesesettingsareoptionalanddo

notrequiremodicationfortheheating/coolingsystemtooperate.However,someofthesesettingsmay

requiretheconsultationofaninstallerfordeterminingwhichsettingswillachievepeakperformance.

1. Select MENU on the Main Screen using the

or button.

2. Pressthe

button.

3. Select SETTINGS

using the

 or 

button.

4. Pressthe

button.

5. SelectOPTIONSusing

the

or button.

6. Press the

button.

NOTE: TheOPTIONS

menuwill appear in the display with anevent

beneathEVENTSPERDAYalreadyselected.

7. Pressthe

button.

8. Changetheeventusingthe

or buttons.

9. Pressthe

buttontosavethesetting.















 





















NonprogrammableOption

The nonprogrammable option disables the

usage of all programming schedules, Smart

Recovery,andtemperatureholds.Itrequiresno

programmingandisasbasicasoperatinganold

manualstylerotarythermostat.

To use this option, perform steps 1 - 9 below

andselectNONPROGRAMMABLEinstep8.To

activateanairconditioner,furnace,orheatpump,

placethe thermostat inan operating mode as

describedonpage6.Adjustthetemperatureby

simplypressingthe or buttonsanywhere

ontheMainScreen(orbyaccessingtheTEMP

menuonthe MainScreen).When thedesired

temperature setting is displayed, press the 

buttontosavethesetting.

ProgrammableOptions

4 Schedule Events/Day

•WAKE:Thetemperaturesettinginthemorning

wheneveryonewakesup.

•LEAVE:The temperaturesetting for the time

awayfrom home and energy savings are

wanted.

•RETURN:The temperature setting in the

eveningwheneveryonereturnshome.

•SLEEP:Thetemperaturesettingatnightwhen

everyoneisasleep.

2 Schedule Events/Day

•DAY:Thetemperaturesettingduringdaylight

hours.

•NIGHT:Thetemperaturesettingduringnight

timehours.

2 Events/D Business

•ACTIVE:The temperature setting during

businesshours.

•IDLE:Thetemperaturesettingwhenbusiness

isclosed.

Dehumidiﬁcation

Dehumidicationistheprocessofreducingthelevelofhumidityintheair.Thesystemcanonlyprovide

dehumidicationwhenanairconditionerorheatpumpisconnectedtotheheating/coolingsystem.The

defaultsettingisON.

Smart Recovery

TheSmartRecoveryoption(disabledbydefault)can

enhancecomfortbymodifyingheatingandcooling

setpointstoeasethetransitionfromoneprogram

schedule to the next. During the time prior to a

programschedulechange(whichwillcallforhigher

heatingsetpointorlowercoolingsetpoint),Smart

Recoverygraduallyadjuststhesetpointin1degree

increments to anticipate this change.Thus room

temperaturewillbeatorclosetothesetpointforthe

nexttimeblockwhenthattimeblockbegins.Actual

resultsdependonhomesystemcharacteristics.This

functionisnotavailablewhenthethermostatisin

nonprogrammablemode.SmartRecoverydoesnot

applytoiQZonesystemswithzonecontrolenabled.

1. Select MENU on the Main Screen using the

or button.

2. Pressthe

button.

3. SelectSETTINGSusing

the

or button.

4. Pressthe

button.

5. Select OPTIONS using

the

or button.

6. Pressthe

button.

7. Selecttheoptionbeneath

SMART RECOVERY

usingthe

or button.

8. Pressthe

button.

9. ChangetheSMARTRECOVERYsetting:

iThe

buttonchangesthesettingtoONandthe

buttonchangesthesettingtoOFF.

10.Pressthe

buttontosavethesetting.

Auto Changeover Time

Auto Changeover Time sets the minimum time

off before the thermostat can change from heat

to cool or vice versa when in auto mode. This

preventsthesystemfromjumpingbackandforth

betweenheatingandcoolingequipment.Thetime

canbesetbetween15-120minutes(in15minute

increments)orDISABLE.Settingautochangeover

timetoDISABLEremovesAUTOfromtheoperating

mode menu. To select an operating mode see

page6.

1. Select MENU on the Main Screen using the

or button.

2. Pressthe

button.

3. SelectSETTINGSusingthe

or button.

4. Pressthe

button.

5. SelectOPTIONSusingthe

or button.

6. Pressthe

button.

7. SelecttheoptionbeneathAUTOCHANGEOVER

TIMEusingthe

or button.

8. Pressthe

button.

9. Change the Auto

ChangeoverTime:

iThe

buttonadjuststhe

time15minutesforward

andthe buttonadjusts

the time 15 minutes

backward.

10.Pressthe

buttontosavethesetting.



























 























 





















1. Select MENU on the Main Screen using the

or button.

2. Pressthe

button.

3. SelectSETTINGSusingthe

or button.

4. Pressthe

button.

5. SelectOPTIONSusingthe

or button.

6. Pressthe

button.

7. SelecttheoptionbeneathDEHUMIDIFICATION

usingthe

or button.

8. Pressthe

button.

9.Change the

DEHUMIDIFICATION

setting:

iThe

 button changes

the setting to ON and

the  button changes

thesettingtoOFF.

10.Press the

 button to

savethesetting.













 























Minimum Heat Pump Usage

Temperature

Undermostcircumstances,theiQDrivesystemuses

aheatpump(ifavailable)astheprimarysourceof

heatingbecauseitisusuallylessexpensivetorun

thanthegasfurnaceorelectricheat.TheHeatPump

UsageTemperaturelimitcanbeadjustedsothatthe

heatpumpwillnotoperatebelowthistemperature

andswitchesthesystemtothefurnaceorelectric

heaterforheat. The system will not allow the heat

pump to operate below an outdoor temperature

of 12

° F (-11° C). Somereasonsforchoosingto

increasethistemperatureabovethedefaultlimitof

°(F)include:

•Ifthecostofelectricityishighcomparedtogasin

thearea,itmaybecheapertorunthefurnaceat

highertemperatures.Consultthelocaldealeror

utilityforrecommendations.

•Comfortlevelscreatedbythegasfurnaceduring

coldweathermaybepreferred.

Backup Heat Response

Thesystemwillswitchautomaticallyfromtheheat

pump to the furnace (when needed) to heat the

roommorequickly.IfthesystemusesaniQDrive

modulatingfurnacewithaconventionalheatpump,

thereissomecontroloverthisresponse.Ifthe“Fast”

responseisselected,thefurnacewilltakeoverifthe

roomtemperatureis4

°(F)lowerthanthesetpoint

after10minutes.“Slow”responsewillactafter20

minutes.NOTE: Thisoptionisonlyavailablewhen

aoneortwostageheatpumpisinstalledwithan

iQDrivefurnace.

1. Select MENU on the Main Screen using the

or button.

2. Pressthe

button.

3. SelectSETTINGSusingthe

or button.

4. Pressthe

button.

5. Select OPTIONS using

the

or button.

6. Pressthe

button.

7. Select the option

beneathBACKUPHEAT

RESPONSEusingthe



or

button.

8. Pressthe

button.

9. ChangetheBACKUPHEATRESPONSEtofast

orslowusingthe

or buttons:

10.Pressthe

buttontosavethesetting.















 





















IMPORTANT:

Changing the Minimum Heat Pump Usage

Temperature affects when and how much the

furnacewillbeusedinsteadoftheheatpump

for heating. This will change the total cost of

heatingyourresidence.Insomeareas,thetotal

costwilldecreaseifthetemperatureischosen

correctly.However,thiscanonlybedetermined

byconsultingwithaniQDrivetrained,licensed

dealer.Please do not alter this setting without

ﬁrst obtaining proper information speciﬁc to

your area.

1. Select MENU on the Main Screen using the

or button.

2. Pressthe

button.

3. SelectSETTINGSusingthe

or button.

4. Pressthe

button.

5. Select OPTIONS using

the

or button.

6. Pressthe

button.

7. Selecttheoptionbeneath

HEAT PUMP USAGE

LIMITusingthe

or 

button.

8. Pressthe

button.

9. ChangetheHEATPUMPUSAGELIMIT:

iThe

 buttonraises the temperature and the

buttonlowersthetemperature.

10.Pressthe

buttontosavethesetting.

















 



















Humidity Control

RelativeHumidity(RH)istheratioofwatervaporin

theaircomparedtothemaximumamountofwater

vaportheaircanholdatthesametemperature.RH

istypicallyexpressedasapercentageandisclosely

relatedtopersonalcomfort.Whenhumidityishigh

wetendtofeelhotterthantheactualtemperature

andwhenhumidityislow,theairisdrierandwe

feelcooler.

While the iQ Drive compatible indoor furnace or

airhandlerwillalwaysprovideahumidiercontrol

output,actualhumidicationequipmentisoptional

andnotprovidedwiththeheatingunits.

A limited capability for dehumidication control

is provided with all iQ Driveair conditioning and

heat pump systems and in iQ Drive modulating

furnacesystemscoupledwithanycompatibleair

conditionerorheatpump.Dehumidicationisnotthe

primaryfunctionofaniQDrivecomponent.Itmay

notbeabletofullydehumidifyunderallconditions.

Dehumidication may be enabled or disabled by

changingthesettingintheOPTIONSscreen.See

page12.

Humidify/Dehumidify

1. Select RH on the Main Screen using the

or button.

2. Pressthe

button.

3. Pressthe

buttontoaccessthehumiditysettings.

4. Select HUMIDIFY or

DEHUMIDIFYusingthe

or button.

5. Pressthe

button.

6. ChangetheHUMIDIFY/

DEHUMIDIFY setpoint:

(5%incrementsonly)

iThe

buttonraisesthe

humidityandthe button

lowersthehumidity.

7. Press the

 button to

savethesetting.

8. Pressthe

buttontoexit

the Humidity Settings

screen.

70°

HUMIDITY

HEAT

FAN AUTO

MODE MENU

FAN

TEMP

1/19/09

10:00 AM

OUTDOOR

HEAT 70

COOL 80



















Offsets

Manyfactorssuchasaroom’sairow,directsunlight

onthethermostat,positioningofthethermostatnear

windows,doors,etc.cancausethetemperatureor

relativehumidityontheMainScreentovaryfrom

theactualvalue.Offsetscanbeusedtobalanceout

theseuctuationssothatthetemperatureonthe

MainScreenmorecloselyreectsthetemperatureof

thelivingspace.Temperatureoffsetscanbechanged

to±5degrees.Therelativehumidityhasarange

of±10%.Thedefaultsettingforalltheoffsetsis0.

•INDOORTEMPERATURE:Thetemperatureofthe

livingspaceandisthelargestnumberdisplayed

ontheMainScreen.

•REMOTETEMPERATURE:Thisoffsetisnotused

withstandardsystemequipment.

•RELATIVEHUMIDITY:Thehumiditylevelmeasured

atthethermostatandshownontheMainScreen.

•HEATANTICIPATOR:Theheatanticipatortellsthe

furnacewhentoshutoffastheroomreachesthe

desiredtemperature.Thisalsoaffectshowmuch

temperature swing will occur in the room.The

heat anticipator function operates similarto the

anticipatorfoundinolderthermostatsandisonly

usedwith1or2stageconventionalfurnaces.This

settingshouldonlybechangedafterconsulting

withyourdealer.

1. Select MENU on the Main Screen using the

or button.

2. Pressthe

button.

3. SelectSETTINGSusing

the

or button.

4. Pressthe

button.

5. Select OFFSETS using

the

or button.

6. Pressthe

button.

7. Selectanoffsetfromthelistusingthe

or 

button.

8. Pressthe

button.Theoptionwillblinkinthe

displayindicatingtheoffsetcanbechanged.

9. Changetheoffset:

iThe

buttonraisestheoffsetandthe button

lowerstheoffset.

10.Pressthe

buttontosavethesetting.

11.Repeatsteps7-10foradditionaloffsets.

SELECT

OFFSETS

INDOOR TEMPERATURE

DEGREES F

CHANGE

REMOTE TEMPERATURE

DEGREES F

RELATIVE HUMIDITY

HEAT ANTICIPATOR

iQZoneisaspecialvariationoftheiQDrivesystem

whichcombinesthefeaturesofaniQDriveheatingand

coolingsystemwiththatofzoning.Zoningsubdivides

thehomeintotwotoeightseparateroomsorgroupsof

rooms(zones)whichcanbeindividuallycontrolledfor

heating,ventilation,andairconditioning.AniQZone

systemiscontrolledthroughacombinationoftheiQ

Drivethermostat/controllerandlocalzonethermostats,

whoseoperationisdescribedindetailintheiQZone

SystemZoneThermostatUser’sManual.

Whenzonecontrolis ineffect,theMain Screenof

theiQcontrollerwillappear

slightly different from that

shown on page 3, which is

fornon-zoningoperation.No

temperaturewillbedisplayed,

and ZONE CNTL appears

beneaththeoperatingmode.

For zoning operation, the

Operating Mode (COOL,

HEAT,AUTO,E-HEAT,orOFF)mustbeselectedfrom

theiQDrivethermostat/controlleraswithnon-zoning

systems. However, the temperature setpoints that

willbeusedareenteredandstoredatthelocalzone

thermostats.WithiQZonesystems,allsettingsmade

intheiQthermostat/controllerrelevanttoatemperature

setpoint(temporaryhold,vacationhold,permanent

hold, time schedule, smart recovery) do not apply

unlesszonecontrolisdisabled.Similarfeaturesare

providedandcontrolledateachzoneindependently

from the local zone thermostats. For example,

ManualSetpoint Control replacesTemporary Hold,

AutomaticSetpointControlreplacestimeschedules,

andSleepModereplacesSmartRecovery.Seethe

iQZoneSystemZoneThermostatUser’sManualfor

informationonthesealternativefeatures.NOTE:iQ

ZonesystemswithVersion1.0.0 zonethermostats

use a single setpoint for both heating and cooling.

iQZonesystemswithVersion2.0.xthermostatsuse

separatesetpointsforheatingandcooling(aswith

the standard non-zoning control), with the cooling

setpointalwaysbeingatleast2°Fhigher.

ZoneControlisenabledbydefaultifyoursystemis

equippedwithandwiredforiQZone.Thisisthenormal

operatingsituation.However,zonecontroloperation

canbedisabledbychoiceoritmaybeautomatically

disabledifaproblemisdetected.Whenzonecontrolis

disabled,thethermostatoperatesasexplainedinthis

manual,andtheMainScreenwillreverttodisplaying

thetemperaturevalue.



To manually disable zone control when zoning is

alreadyenabled:

1. Select MENU on the Main Screen using the

or button.

2. Pressthe

button.

3. Select SETTINGS using

the

or button.

4. Pressthe

button.

5. SelectZONECONTROL

usingthe

or button.

6. Pressthe

button.

7. Pressthe

or button

tochangeENABLEtoDISABLE.

8. Pressthe

buttontosavethesetting.

NOTE: Torestorezonecontrol,followsteps1-8above,

butinstep7changeDISABLEtoENABLE.

CurrentdateandtimemustbesetintheiQthermostat/

controllerasdescribedonpage4.Dateandtimewill

betransmittedtoandcontinuallyupdatedinthelocal

zonethermostats.

iQZone offerstwo types of ventilationthat canbe

turnedonwhenthecoolingorheatingsystemsare

notrunning:

•Ifyouwishtousethefantodeliverairtosomebut

notallzoneswhennotheatingorcooling,usethe

zoneventilationfeaturethatissetupattheindividual

zonethermostats.See the iQZoneSystemZone

ThermostatUser’sManualforinformationonhow

toset up zone-by-zoneventilation. Fromthe FAN

MENU, enter theVENTILATION SPEED screen

inthe iQ thermostat/controller toselect or modify

the relative speed to be used when this type of

ventilationisoperating.

•Ifyouwishtousethefantodeliverairtoallzones

whennotheatingorcooling,settheFanModetoON

asdescribedearlierinthisguide.TheIntermittent

Fan feature described earlier will also operate,

servingallzones.

TemperatureunitscanbechangedtoFahrenheitor

Celsius,butshouldbeconvertedbyaninstallertrained

andcertiediniQsystems.

TheSecurityLockoutfeaturedescribedonpage8will

notpreventchangingsettingsinlocalzonethermostats

in an iQ Zone system.

 NOTE: When changes are

madewithiQZone,thesystemmayappeartohave

a delayed response. Generally this is due to extra

timeneededforzonestoopenorshutinpreparation

forthechange.

HUMIDITY

COOL

FAN AUTO

MODE MENU

FAN

RH TEMP

1/19/09

10:00 AM

OUTDOOR

ZONE CNTL

ZONE CONTROL

MODIFY

ENABLE

SAVE

ZONE CONTROL

ZONE CONTROL OPERATION

MAIN SCREEN DIAGNOSTIC MESSAGES

Thepurposeofthissectionistoprovideadditionalinformationregardingmessageswhichmayappearonthetoplineofthe

iQcontroller’smainscreen.

Thetoplineofthemainscreenwilldisplaydateandtime,dayoftheweek,servicealerts,andstatusmessages.Inaddition,

messagesrelatedtounusualconditionsandsystemorcomponentfaultswillbedisplayedwhiletheconditionpersists.Please

notethatmanyoftheseconditionsaretemporaryanddonotnecessarilyrequireaservicecall.

Any time the screen backlight is red and “SERVICE NEEDED” appears, a service visit should be scheduled promptly.

Otherwise,followthegeneralguidelinesbelow.

• InsystemswhichincludeaniQmodulatinggasfurnace,messagesthatinclude“FURN”or“FURNACE”usuallyindicate

operationinwhichmorethanoneattempttostarthasbeenrequired,whichmaynotbeanunusualcondition.If“FURNACE

1HOURLOCKOUT”or“FURNACEIGNITIONFLT”isdisplayed,thefurnacewillnotattempttorestartforonehour.Inthat

caseaservicecallmayberequired.

• IniQheatpumpsystems,ifanunusualconditionisdetectedwiththeoutdoorequipment,theindoorfurnaceorelectric

heatwilloperateasabackup.Aservicetechnicianshouldbeconsultedwhenitisconvenient.

• Anymessagesthatinclude“COMM”indicateacommunicationinterruptionbetweendevices.Requestserviceonlyifsuch

messagesarefrequentandpersistent.(Allowatleast5minutesfortheindicationtoclear.)

• Messageswhichincludetheword“SENSOR”andwhichdonotresultintheredbacklitscreenbeingdisplayedrequire

eventualbutnotimmediateserviceattention.

• Ifindoubt,oriftheequipmentdoesnot(re)startafter1hour,consultyourservicepersonandreportthemessagedisplayed

onthescreen.

Main Screen

MODE FANTEMP MENURH

HUMIDITY

HUMIDITY SETTINGS

HUMIDIFY

DEHUMIDIFY

HOLD THIS

TEMPERATURE

UNTIL

OPERATING MODE

OFF

AUTO

COOL

HEAT

E HEAT

FAN MENU

AUTO

PROGRAMMED FAN

VENTILAT ION SPEED*

PROGRAMMED FAN

MAIN MENU

SET TIME AND DATE

HOLD

PROGRAM

FAN

MODE

SETTINGS

SECURITY LOCKOUT

SET DATE AND TIME

AUTO DAYLIGHT SAVING

HOLD MENU

VACATION

PERMANENT

AUTO DAYLIGHT SAVING

OFF

SET DATE AND TIME

SET YEAR

SET MONTH

SET DAY

SET HOUR

SET MINUTE

VACATION HOLD

HOLD TEMPERATURE

PERMANENT HOLD

HOLD TEMPERATURE

VACATION HOLD

HOLD UNTIL DATE

VACATION HOLD

HOLD UNTIL TIME

FAN MENU

AUTO

PROGRAMMED FAN

MODE MENU

OFF

AUTO

COOL

HEAT

E HEAT

SECURITY LOCKOUT

TEMP ADJUST ONLY

TOTAL KEYPAD LOCKOUT

ENTER PIN NUMBER

SETTINGS MENU

SCREEN SETTINGS

OPTIONS

OFFSETS

INTERMITTENT FAN

ZONE CONTROL*

OPTIONS

PROGRAM SCHED USAGE

DEHUMIDIFICATION

AUTO CHANGEOVER TIME

SMART RECOVERY

HEAT PUMP USAGE LIMIT

BACKUP HEAT RESPONSE

OFFSETS

INDOOR TEMPERATURE

REMOTE INDOOR TEMP

OUTDOOR TEMPERATURE

RELATIVE HUMIDITY

HEAT ANTICIPATOR

SCREEN SETTINGS

FAHRENHEIT OR CELSIUS

12 OR 24 HOUR CLOCK

CONTRAST

INTERMITTENT FAN

BACKLIGHT ON TIME

INTERMITTENT FAN

FAN ON TIME

FAN OFF TIME

PROGRAM MENU

COPY

[list of days]

EVERY DAY

WEEKDAYS

WEEKENDS

MONDAY

TIME HEAT COOL FAN

SCHEDULE BLOCK 1

SCHEDULE BLOCK 2

SCHEDULE BLOCK 3

SCHEDULE BLOCK 4

COPY FROM

COPY TO

COPY PROGRAM

(Confirmation)

(TYPICAL FOR EACH DAY OR GROUP OF DAYS LISTED)

NOTE: Bold Font Indicates Menu or Screen Title Name

* For iQ Zone Usage Only.

ZONE CONTROL*

ENABLE / DISABLE

IQ DRIVE® THERMOSTAT SCREEN MAP

iQ DRIVE THERMOSTAT SETTINGS

MENU /OPTION RANGE UNITS

DEFAULT

SETTING

SCREEN

SETTINGS

AutoDaylightSavings OFForON ON

FahrenheitorCelsius

Fahrenheit

orCelsius

Fahrenheit

12or24HourClock 12or24 12

Contrast 1to15 Incrementsof1 4

BacklightOnTime

30to120seconds

orContinuouslyON

30secondincrements 30

THERMOSTAT

OPERATION

Holds(all) OFForON OFF

IntermittentFanOnTime Offor5to20minutes 5minuteincrements OFF

IntermittentFanOffTime 5to40minutes 5minuteincrements 40

SecurityLockout

Totalkeypador

Tempadjustonly

WritePINnumberhere:

_____________________

OFF

PROGRAMMING

THE

THERMOSTAT

EVENTS

TIME 24Hours 10minuteincrements

6:00a.m.

8:00a.m.

5:00p.m.

10:00p.m.

HEAT

40°Fto90°F

4°Cto32°C

Incrementsof1°

70°F(21°C)

62°F(16°C)

70°F(21°C)

62°F(16°C)

COOL

40°Fto90°F

4°Cto32°C

Incrementsof1°

78°F(25°C)

85°F(29°C)

78°F(25°C)

82°F(27°C)

FAN AUTOorON AUTO

ADVANCED

THERMOSTAT

SETTINGS

ProgramScheduleUsage

4ScheduleEvents/Day

2ScheduleEvents/Day

2Events/DBusiness

Nonprogrammable

4Schedule

Events/Day

AutoChangeoverTime 0to120Minutes 15minuteincrements 60Minutes

SmartRecovery OFForON OFF

Dehumidication OFForON ON

MinimumHeatPumpUsage 12°Fto74°F Incrementsof1° 12°F

BackupHeatResponse

Fast(10Minutes)

Slow(20Minutes)

Slow

OFFSETS

IndoorTemperature to5°Fto+5°F Incrementsof1°F 0

RemoteTemperature NotUsed

RelativeHumidity to10%to+10% Incrementsof1% 0

HeatAnticipator

(conventionalfurnacesonly)

0to9 Incrementsof1 0

709063B(Replaces709063A)

iQDrive

isaregisteredtrademarkofNordyne.

Specications&illustrationssubjecttochangewithoutnoticeorincurringobligations(05/15).

Maytag PGC2MQ User manual

Brand: Maytag

Model: PGC2MQ

Category: Thermostats

Type: User manual

Download PDF

report

Maytag PGC2MQ User manual

Maytag PGC2MQ User manual

Related papers

Other documents