010-7103 - Qty 2
Wall Bracket
010-7102 - Qty 2
Wall Cleat
010-7115 - Qty 1
Surface Mount Bracket
030-1796 - Qty 10
#10-32 x 1/2” Serrated Screw
TLMTKIT5
TechGuard™ Charging Locker
Assembly Instructions
TLMTKIT5 031-10438 Rev 1.0
TLMTKIT5 031-10438 Rev 1.0
Assembly Instructions
2
1
Surface Mounting
2
010-7115
(1)x
19” (483mm)
19” (483mm)
Charging
Locker
Unit
Unit shown xed to surface
edge for reference
7.8” (198mm)
2.3”
(57mm)
9” (229mm)
1.4” (34mm)
0.9” (22mm)
TLMTKIT5 031-10438 Rev 1.0
Assembly Instructions
3
3
Slide unit backward to
hook onto bracket.
1
2
4
030-1796
(1)x
Do not overtighten.
TLMTKIT5 031-10438 Rev 1.0
Assembly Instructions
4
1
Wall Mounting
Consult with a structural engineer or suitable professional prior to mounting.
Mounting hardware (not provided) and installation method must be suitable
withspecicwallconstructionused.
Only for a single unit of 5-bay.
Nothing may be placed on top.
Units may not be stacked.
010-7102
(1)x
Use screws in four positions shown 16” on center. Consult
with a structural engineer or suitable professional prior to
mounting. Use a bubble level to install wall cleats.
TLMTKIT5 031-10438 Rev 1.0
Assembly Instructions
5
2
030-1796
(8)x
010-7103
(2)x
TLMTKIT5 031-10438 Rev 1.0
Assembly Instructions
6
3
Assemble unit to wall cleat.
Side View
Two Person
Assembly Required.
TLMTKIT5 031-10438 Rev 1.0
4
030-1796
(2)x
11000 Seymour Avenue
Franklin Park, Illinois 60131 USA
Toll Free Phone: +1-800-521-9614
Phone: +1-847-678-2545
Toll Free Fax: +1-800-343-1779
Fax: +1-847-678-0852
BRETFORD.COM
Bretford, B design, and TechGuard are trademarks or registered marks of Bretford Manufacturing, Inc. or Bretford
Manufacturing, Ltd. Patents pending. ©2015 Bretford Manufacturing, Inc. All rights reserved. All other referenced
product names and logos are trademarks of their respective owners.
/
