Vivitek NC1000US Operating instructions

Recover a Launcher Device

Version 1.0

Page 1 of 1

Instructions to Recover a Corrupted Launcher Device

In an extremely rare scenario, a launcher device might run into some problem due to file

corruption or accidentally deleting files from its “disk storage”. If this happens, you can recover

such a device by following the steps described below.

1) Download the latest launcher software package from Vivitek website

(http://www.vivitekcorp.com);

2) Format your Launcher “disk storage”;

3) Unzip/copy the entire launcher package to the “disk storage”; (You should see the

file/folder structure in the figure below.)

4) Make sure your computer is connected to the Internet;

5) Execute “Launch Novo” so that it can get the authentication from our license server.

This manual is also suitable for

Download PDF